研究了挤压AM50(-Ca)镁合金的微观组织和力学性能.研究发现添加钙在AM50合金中生成新的Al2Ca相,并细化合金的晶粒尺寸.大于2wt.%的钙使铸态AMS0的晶粒尺寸从200 μm减小到40 μm,使挤压态AM50的晶粒尺寸从15 μm减小到7.5 μm.含钙量较少时,晶粒内仍含有少量的Mg17Al12相,Al2Ca相主要分布在晶界;含钙量多于2wt.%时,合金中的Mg17Al12完全消失,除晶界处的Al2Ca相外,在晶粒内部出现大量的针状Al2Ca相.加钙提高了AM50合金的低温抗拉强度,同时在所有试验温度下合金的屈服强度得到提升.
参考文献
[1] | POLMEAR I J.Magnesium alloys and applications[J].MATERIALS SCIENCE AND TECHNOLOGY,1994(10):1-16. |
[2] | MORDIKE B L;EBERT T .Magnesium Properties-applications-potential[J].Materials Science and Engineering,2001,A302:37. |
[3] | 余琨,黎文献,王日初,马正青.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003(02):277-288. |
[4] | Tatiana V. Larionova;Won-Wook Park;Bong-Sun You .A ternary phase observed in rapidly solidified Mg-Ca-Zn alloys[J].Scripta materialia,2001(1):7-12. |
[5] | R. NINOMIYA;T. OJIRO;K. KUBOTA .IMPROVED HEAT RESISTANCE OF Mg-Al ALLOYS BY THE Ca ADDITON[J].Acta Metallurgica et Materialia,1995(2):669-674. |
[6] | PEKGULERYUZ M O;ARSLAN A Kaya .Creep resistant magnesium alloys for powertrain application[J].Advanced Eng Mater,2003,5(12):866-878. |
[7] | QUDONG Wang;WENZHOU Chen;XIAOQIN Zeng et al.Effects of Ca addition on the micmstructure and mechanical properties of AZ91 magnesium alloy[J].Journal of Materials Science,2001,36:3035-3040. |
[8] | LUO A;PEKGULERYUZ M O .Cast Magnesium alloys for elevated temperature applications[J].Journal of Materials Science,1994,29:5259-5271. |
[9] | SAKAMOTO M;AKIYAMA S;OGI K et al.[J].Journal of Mater Sci Letters,1997,16(12):1048-1051. |
[10] | WANG R M;EliEZER A;GUTMAN E M et al.An investigation on the microstructure of AM50 magnesium alloy[J].Mater Sei Eng,2003,A355:201-207. |
[11] | Chunjiang Ma;Manping Liu;Guohua Wu .Tensile properties of extruded ZK60-RE alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):207-212. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%