为了获得致密的块状Fe86Zr55Nb55B3纳米晶合金,研究了高压快速烧结工艺参数对样品致密度和α-Fe相晶粒尺寸的影响.结果表明:快淬球磨破碎非晶粉末在5.5 GPa/3min烧结条件下,当Pw=1150 W后,可获得相对密度为98.3%、单相α-Fe纳米晶(16.3 nm)块体合金,且随着Pw和t的增加,样品相对密度和α-Fe相晶粒尺寸均略有增加,样品典型的比饱和磁化强度σs和矫顽力Hc分别为119.6 emu/g,63.8 Oe.
参考文献
| [1] | Yoshizawa Y;OGUMA S;YAMAUCHI K .New Fe-based soft magnetic alloys composed of ultrafine grain sturcture[J].Journal of Applied Physics,1988,64:6044-6046. |
| [2] | KAWAMURA Y;INOUE A;KOJIMA A et al.Consolidation of amorphous Fe-Zr-B powders by hot-pressing method[J].Journal of the Japan Society of Powder and Powder Metallurgy,1995,42:40-46. |
| [3] | Kojima A;HORIKIRI H;MAKINO A et al.Softmagnetic porerties of nanocrystalline bcc Fe-(Nb,Zr)-B bulk alloys consolidated by warm extrusion[J].Materials Transactions,1995,36:945-951. |
| [4] | Kojima A;HORIKIRI H;KAWAMURA Y et al.Production of nanocrystalline b.c.c.Fe-Nb-B bulk alloys by warm extrusion and their magnetic properties[J].Materials Science and Engineering,1994,A179/A180:511-515. |
| [5] | 陆昌伟;奚同庚.热分析质谱法[M].上海:上海科学技术文献出版社,2002 |
| [6] | 卢斌;易丹青;刘岩.MA制备Fe84Nb7B9纳米晶粉末与低温热压成型[A].北京:冶金工业出版社,2002:343-346. |
| [7] | 林晓敏.静高压下非晶（Fe0.99,Mo0.01）78Si9B13合金晶化过程的热力学研究[J].高压物理学报,1997(04):260. |
| [8] | Herzer G .Nanocrystalline soft magnetic materials[J].Journal of Magnetism and Magnetic Materials,1992,112:258-262. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%