采用12.7 mm穿燃弹,进行陶瓷/铝合金复合靶板在不同倾角下的侵彻试验,研究靶板倾角对抗弹性能的影响.结果表明:随着倾角的增大,靶板的局部防护系数单调增加,表明防护能力在增加;陶瓷面板与背板粘合后靶板的局部防护系数显著高于面板与背板未粘合的情况.
In order to investigate the influence of obliquity on the ballistic properties of ceramic/aluminum armors,the 12.7 mm Armor Piercing (AP) projectiles were fired at ceramic/aluminum target at the different obliquity. It was found that ballistic properties increase with obliquity. Partial protection efficiency of armors with back plate and face plate bonded together is always higher than that not bonded together.
参考文献
| [1] | 姜春兰,陈放,李明,马晓青.钨球对陶瓷/铝复合靶的侵彻与贯穿[J].兵工学报,2001(01):37-40. |
| [2] | 张自强;赵宝荣;张锐生.装甲防护技术基础[M].北京:兵器工业出版社,2000:12. |
| [3] | 姚艳玲,赵宝荣,钟涛,白嵘.铝合金板抗枪弹倾角效应试验研究[J].兵器材料科学与工程,2005(03):33-36. |
| [4] | 张明,何煌,曾首义.穿甲子弹侵彻陶瓷复合装甲的有限元分析[J].兵工自动化,2006(07):37-39. |
| [5] | 王天运;李爽;刘水江 等.Al2O3陶瓷/CFRP复合防护板抗弹性能研究[J].防护工程,2008,30(02):55-58. |
| [6] | 黄良钊.抗弹陶瓷的特殊耗能机制研究[J].兵器材料科学与工程,2001(05):3-6. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%