简要介绍喷射成形技术及其特点,回顾喷射成形技术的发展历程,总结喷射成形工艺及理论研究的最近进展情况,并对该技术的前景与研究发展方向进行展望,提出利用自反应喷射成形方法制备结构陶瓷坯件的新设想.
参考文献
| [1] | 高娃,孙廷富.喷射成形技术的应用及产业化发展趋势[J].兵器材料科学与工程,2002(03):67-69,66. |
| [2] | La Peiqing;Xue Qunji;Liu Weimin .A study of MoSi2-MoS2 coatings fabricated by SHS casting route[J].Materials Science and Engineering,2000,277:266-273. |
| [3] | Dai S L;Delplanque J P;Lavernia E J .Grain growth in reactive spray deposited 5083 alloys[J].Scripta Materialia,1999,40(02):145-151. |
| [4] | Singer A .Spray forming of metals[P].BP 1262471,1972-02-12. |
| [5] | 王军,严彪,徐政.喷射成形技术的发展应用[J].上海有色金属,2002(03):133-138. |
| [6] | 徐寒冰;吴建生;章靖国 .喷射成形技术进展及其工业应用[J].机械工程材料,1999,23(06):1-5. |
| [7] | 苏俊,崔成松,曹福洋,李庆春.喷射成形技术在钢铁材料中的应用[J].铸造,2002(07):399-402. |
| [8] | 王文明,潘复生,Lu Yun,曾苏民.喷射成形技术的发展概况及展望[J].重庆大学学报(自然科学版),2004(01):101-106,111. |
| [9] | 张永昌.金属喷射成形的进展[J].粉末冶金工业,2001(06):17-22. |
| [10] | Lavernia E J;Grant J .Spray deposition of materials:a review[J].Materials Science and Engineering,1988,98:381-388. |
| [11] | 康智涛 .多层喷射共沉积制备大尺寸SiC颗粒增强铝基复合材料的工艺、设备及过程原理研究[D].中南大学,2001. |
| [12] | 陈振华,陈鼎,康智涛,严红革,张福全,袁武华,王慧敏.坩埚移动式喷射共沉积制取铝基复合材料的技术[J].湖南大学学报(自然科学版),2002(06):22-30. |
| [13] | Tiwari R;Sampath S;Gudmundsson B et al.Microstructure and tensile properties of L12-type Ni-Cr-Al alloy prepared by vacuum plasma spray forming[J].Scripta Metallurgical Materials,1995,33(07):1159-1162. |
| [14] | Jongsang Lee;J. Y. Jung;Eon Sik Lee;W. J. Park;S. Ahn;Nack J. Kim .Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):274-283. |
| [15] | B. Yang;F. Wang;J. S. Zhang .Microstructural characterization of in situ TiC/Al and TiC/Al-20Si-5Fe-3Cu-1Mg composites prepared by spray deposition[J].Acta materialia,2003(17):4977-4989. |
| [16] | 杨滨,王锋,黄赞军,段先进,张济山.喷射沉积成形颗粒增强金属基复合材料制备技术的发展[J].材料导报,2001(03):4-6. |
| [17] | 傅晓伟;张济山;孙祖庆 .喷射沉积过程的计算模型[J].北京科技大学学报,1997,19(01):64-67. |
| [18] | Dirk Bergmann;Udo Fritsching;Klaus Bauckhage .A mathematical model for cooling and rapid solidification of molten metal droplets[J].International Journal of Thermal Sciences,2000(1):53-62. |
| [19] | Krauss M;Bergmann D;Fritsching U et al.In-situ particle temperature,velocity and size measure mernts in the spray forming process[J].Materials Science and Engineering,2002,326:154-164. |
| [20] | N.H. Pryds;J.H. Hattel;T.B. Pedersen .An integrated numerical model of the spray forming process[J].Acta materialia,2002(16):4075-4091. |
| [21] | Hattel J H;Pryds N H;Thorborg J .The effect of droplet size distribution on gas temperature during the spray process[J].Scripta Materialia,2000,42:145-150. |
| [22] | Hattel J H;Pryds N H .A unitied spray forming model for the prediction of billet shape geometry[J].Acta Materialia,2004,52:5275-5288. |
| [23] | 孙剑飞,沈军,李振宇,贾均,李庆春.高温合金雾化熔滴的热传输与凝固行为[J].粉末冶金技术,2000(02):92-97. |
| [24] | 张胤,樊俊飞,贺友多,章靖国,孙德生,乐海荣.金属喷射成型过程单颗粒液滴的运动和传热研究[J].包头钢铁学院学报,2003(03):212-215. |
| [25] | Xiaoling Sheng;Calvin Mackie;Carsie A. Hall III .Heat transfer characterization of the solidification process resulting from a spray forming process[J].International Communications in Heat and Mass Transfer,2005(7):872-883. |
| [26] | N. H. Pryds;J. H. Mattel .Spray forming: A numerical investigation of the influence of the gas to melt ratio on the billet surface temperature[J].International Journal of Thermal Sciences,2005(6):587-597. |
| [27] | 李周,米国发.喷射成形过程雾化熔滴质量流率空间分布的研究[J].航空材料学报,1998(02):31. |
| [28] | 喷射成形过程工艺参数作用规律的理论预测[J].中国有色金属学报,1999(02):213. |
| [29] | Kang S;Chang D-H .Modelling of billet shapes in spray forming using a scanning atomizer[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):161-169. |
| [30] | WANG Jian-jiang,DU Xin-kang,LU Da-qin,YE Ming-hui,ZHANG Long.SHS Flame Spraying TiC-TiB2 Multiphase Coatings[J].材料热处理学报,2004(05):981-983. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%