通过采用TIG熔修技术,对船体结构焊接接头焊趾处进行TIG熔修效果的试验研究.试验结果表明,该技术不但可以改善焊趾部形状,实现焊缝到母材的光顺过渡,降低应力集中,而且可以改善焊接热影响区的金相组织,从而提高了船体结构焊接接头的抗断裂韧性,特别是结构的抗爆炸冲击性能.同时,TIG熔修技术还具有工艺简单、操作方便、劳动条件好等优点,具有重要的推广价值和广泛的应用前景.
参考文献
[1] | Hanzawa M;Yokote H.Improvement of fatigue strength in welded high tensile strength steels by toe treatment[A].ⅩⅢ-829-77 |
[2] | Kobaysh;Matsumoto K.Improvement in the fatigue strength of fillet welled joint by use new welding electrode[A].ⅩⅢ-828-77 |
[3] | 高桥贤司;伊藤昭典.突合溶接继手余盛止端部形状とれぢ[J].溶接学会志(日本),1971:40. |
[4] | 杨伯荣;张征权.焊趾TIG整形提高焊接接头疲劳强度的研究[A].,1986 |
[5] | 徐济明.TIG重熔工艺及其对焊接接头σ-1改善效果的研究[A].,1987 |
[6] | Zhang Z;Afarrar R .Influence of Mn and Ni on the microstructure and toughness of C-Mn-Ni weld metals[J].Welding Journal,76(05):183-196. |
[7] | Abson D J .Microstructure and mechanical properties of gas-shielded welding of C-Mn-Ni steel[J].Welding Journal,72(05):173-187. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%