采用扫描电子显微镜(SEM)、动电位极化技术及电化学交流阻抗技术,研究了3种不同铝粉含量的锌铝涂层表面形貌,以及涂层在3.5% NaCl溶液中的浸泡24h的自腐蚀电位、自腐蚀电流密度、阳极钝化情况和阻抗的变化.结果表明:随着铝粉含量的增加,涂层表面逐渐变得光亮、平整;涂层的自腐蚀电位依次升高,自腐蚀电流密度依次降低,当铝粉含量为50%时,涂层动电位极化曲线不存在钝化现象.涂层在3.5% NaCl溶液中浸泡24h的电化学阻抗谱拟合结果显示,铝粉含量较高时,涂层表面形成氧化膜,使得涂层的阻抗增大,降低水的渗入.
参考文献
[1] | 沈志明.达克罗(涂层)防腐新技术[J].电子机械工程,2003(03):4-6. |
[2] | 肖鑫,龙有前,郭贤烙,易翔.锌铬膜涂层技术研究[J].湖南工程学院学报(自然科学版),2002(02):65-67. |
[3] | 张俊敏,李瑛培.达克罗技术及其发展前景[J].表面技术,2000(03):20-22. |
[4] | Hu HL;Li N;Zhu YM .Effect of chromate on the electrochemical behavior of sintered Zn-Al coating in seawater[J].Surface & Coatings Technology,2008(24):5847-5852. |
[5] | 陈玲,李宁.烧结式富锌涂层固化影响因素的研究[J].电镀与精饰,2003(02):1-4. |
[6] | Hernandez M;Genesca J;Uruchurtu J;Galliano F;Landolt D .Effect of an inhibitive pigment zinc-aluminum-phosphate (ZAP) on the corrosion mechanisms of steel in waterborne coatings[J].Progress in Organic Coatings: An International Review Journal,2006(2/3):199-206. |
[7] | Michel F;Dr F et al.The application of zinc aluminum flake non-electrolytic surface coatings[J].Transactions of the Institute of Metal Finishing,1993,71(01):21-25. |
[8] | Liu J G;Gong G P;Yan C W .EIS study of corrosion behavior of organic coating/Dacromet composite systems[J].Electrochamical Acta,2005,50(16/17):3320-3332. |
[9] | 方华,彭立涛,华大力.金属涂层与有机涂层在5%NaCl溶液中的腐蚀特征[J].材料保护,2010(07):55-57,60. |
[10] | 胡会利,李宁,程瑾宁,王雅芬.达克罗涂层在海水中的腐蚀电化学阻抗谱行为[J].中国腐蚀与防护学报,2007(04):197-201. |
[11] | Barranco V;Feliu Jr S;Feliu S .EIS study of the corrosion behavior of zinc-based coatings on steel in quiescent 3% NaCl solution[J].Corrosion Science,2004,46:2203-2240. |
[12] | Liu C;Bi Q;Leyland A .An electrochemical impedance spectroscopy study of the corrosion behavior of PVD coated steels in 0.5 N NaCl aqueous solution.Part Ⅰ.Establishment of equivalent circuits for EIS data modeling[J].Corrosion Science,2003,45:1243-1256. |
[13] | Deflorian F;Fedrizzi L;Rossi S .Organic coating capacitance measurement by EIS:ideal and actual trends[J].Electrochimica Acta,1999,44:42-45. |
[14] | 刘燕,朱子新,马洁,栗卓新,徐滨士.基于电化学阻抗谱的Zn及Zn-Al涂层的自封闭机理研究[J].中国表面工程,2005(02):27-30. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%