Kelvin探针测量技术被引入到腐蚀研究领域后,成为研究薄液膜和有机涂层下金属腐蚀的有力电化学工具和手段.Kelvin探针技术与原子力显微镜技术相结合产生出扫描Kelvin探针力显微镜,使Kelvin技术在材料研究和腐蚀领域得到了更好的应用.本文简述了Kelvin探针技术的测量原理和装置,重点综述了近十年来该技术在电化学研究中的应用进展.
参考文献
[1] | Stratmann M.The investigation of the corrosion properties of metals covered with adsorbed electrolyte layers-a new experimental technique[J].Corrosion Science,1987,27(8):869. |
[2] | Stratmann M,Streckel H.On the atmospheric corrosion of metals which are covered with thin electrolyte layers-Ⅰ.Verification of the experimental technique;-Ⅱ.Experimental results[J].Corrosion Science,1990,30 (6/7):681. |
[3] | Stratmann M,Streckel H K T Kim,S Crockett.On the atmospheric corrosion of metals which are covered with thin electrolyte layers-Ⅲ.the measurement of polarisation curves on metal surfaces which are covered by thin electrolyte layers[J].Corrosion Science,1990,30(6/7):715. |
[4] | 王燕华,张涛,王佳,等.Kelvin探头参比电极技术在大气腐蚀研究中的应用[J].中国腐蚀与防护学报,2004,24(1):59. |
[5] | Tahara,Akira,Kodama,Toshiaki.Potential distribution measurement in galvanie corrosion of Zn/Fe couple by means of Kelvin probe[J].Corrosion Science,2000,42(4):655. |
[6] | Nonnenmacher,M.O 'Boyle,M.P.,Wickramasinghe,H.K.Kelvin probe force microscopy[J].Applied Physics Letters,1991,(58):2921. |
[7] | 邹锋,韩薇,龙康,等.线性回归法进行Kelvin电位测试[J].腐蚀科学与防护技术.1995,7(1):17. |
[8] | 王佳,水流彻.使用Kelvin探头参比电极技术进行薄液层下电化学测量[J].中国腐蚀与防护学撤,1995,15(3):173. |
[9] | 孙志华,刘明辉,李家柱,等.大气腐蚀电化学测定研究[J].航空材料学报,2000,20(3):120. |
[10] | 孙志华,刘明辉,邹礼明,等.用Kelvin探头技术研究铝合金的大气腐蚀[J].腐蚀科学与防护技术,2006,18(2):87. |
[11] | Eimutis Juzeliunas,Aloyzas Sudavicins,Klaus Juttner,et al.Study of initial stages of Al-Mg alloy corrosion in water,chloride and Cu(Ⅱ) environment by a scanning Kelvin probe and XPS[J].Electrochemistry Communications,2003,(5):154. |
[12] | 王佳,水流彻.使用Kelvin探头参比电极技术研究液层厚度对氧还原速度的影响[J].中国腐蚀与防护学报,1995,15(3):180. |
[13] | 邹峰,韩薇.利用Kelvin探针进行金属薄液层下电化学测量[J].腐蚀科学与防护技术,1995,7(3):192. |
[14] | Masuda H.Effect of magnesium chloride liquid thickness on atmospheric corrosion of pure iron[J].Corrosion,2001,57(2):99. |
[15] | Albani O,Huang S M,Oriani R A.Use of the Kelvin probe technique to study corrosion by ionic particles in humid gases[J].Corrosion Science,1994,50(5):331. |
[16] | Yee Shelgon,Oriani,R A,Stratmann M Application of a kelvin microprobe to the corrosion of metals in humid atmospberes[J].Journal of the Electrochemical Society,1991,138(1):55. |
[17] | Lobnig R E,Sicanolfi D J,Psota-Kelty L,et al.Atmospheric corrosion of zinc in the presence of ammonium sulfate particles[J].Journal of the Electrochemical Society,1994,141 (1):2935. |
[18] | Lobnig R E,Siconoifi D J,Psota-Kelty L,et al.Atmospheric corrosion of aluminum in the presence of ammonium sulfate particles[J].Journal of the Electrochemical Society,1996,143 (4):1176. |
[19] | Lobnig R E,Siconolfi D J,Psota-Kelty L,et al.Mechanism of atmospheric corrosion of copper in the presence of submicron ammonium sulfate particles at 300 and 373K[J].Journal of the Electrochemical Society,1996,143(5):1539. |
[20] | 王佳.无机盐微粒沉积和大气腐蚀的发生和发展[J].中国腐蚀与防护学报,2004,24(3):155. |
[21] | A Nasarov,D Thierry.Rate-determining reactions of atmospheric corrosion[J].Electrochimica Acta,2004,(49):2717. |
[22] | X Zhang,W G Sloof,A Hovestad,et al.Characterization of chromate conversion coatings on zinc using XPS and SKPFM[J].Surface & Coatings Technology,2005,(197):168. |
[23] | Fürbeth W,Stratmann M.Investigation of the delamination of polymer films from galvanized steel with the scanning Kelvin probe[J].Fresenius Janal Chemistry,1995,353:337. |
[24] | Fürbeth W,Stratmann M.The delamination of polymeric coatings from electrogalvanised steel-a mechanistic approach,part 1-3[J].Corrosion Science,2001,43:207. |
[25] | Long A,Streckel H,Stratmann M.The delamination of polymeric coatings from steel,part 1-3[J].Corrosion Science,1999,41:547. |
[26] | Doherty M,Sykes J M.Micro-cells beneath organic lacquers:a study using scanning Kelvin probe and scanning acoustic microscopy[J].Corrosion Science,2004,46:1265. |
[27] | B Reddy,M J Doherty,J M Sykes.Breakdown of organic coatings in corrosive environments examined by scanning kelvin probe and scanning acoustic microscopy[J].Electrochimica Acta,2004,(49):2965. |
[28] | B Reddy,J M Sykes.Degradation of organic coatings in a corrosive environment:a study by scanning Kelvin probe and scanning acoustic microscope[J].Progress in Organic Coatings,2005,(52):280. |
[29] | Schmidt W,Stratmann M.Scanning Kelvin probe investigations of filiform corrosion on aluminum alloy 2024-T3[J].Corrosion Science,1998,40(8):1441. |
[30] | J H W de Wit.New knowledge on localized corrosion obtained from local measuring techniques[J].Electrochimica Acta,2001,(46):3641. |
[31] | Han L T,Mansfeld F.Scanning Kelvin probe analysis of welded stainless steel[J].Corrosion Science,1997,39(1):199. |
[32] | 邹峰,Dominigue Thierry,韩文安,等.应用Kelvin探针研究不锈钢焊接区的耐蚀性[J].腐蚀科学与防护技术,1997,9(4):276. |
[33] | Nazarov A,Thierry D.Analysis of surface carbon contamination on phosphated zinc surfaces by scanning Kelvin probe measurements[J].J.Electrochem.Society,1998,145(3):L39. |
[34] | 王燕华.王佳,张际标.AZ91D镁合金微弧氧化过程中的火花放电现象研究[J].中国腐蚀与防护学报,2006,26(5):267. |
[35] | J H W de Wit.Local potential measurements with the SKPFM on aluminium alloys[J].Electrochimica Acta,2004,(49):2841. |
[36] | F Andreatta,H Terryn,J H W de Wit.Corrosion behaviour of different tempers of AA7075 aluminium alloy[J].Electrochimica Acta,2004,(49):2851. |
[37] | L E Fratila-Apachitei,I Apachitei,J Duszczyk.Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopy[J].Electrochimica Acta,2006,(51):5892. |
[38] | F Andreatta,I Apachitei,A A Kodentsov,et al.Volta potential of second phase particles in extruded AZ80 magnesium alloy[J].Electrochimica Acta,2006 (51):3551. |
[39] | A Davoodi,J Pan,C Leygraf,et al.Integrated AFM and SECM for in situ studies of localized corrosion of Al alloys[J].Electrochimica Acta.2007,52 (27):7697. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%