用电化学和失重法,研究了一种以DG1和BTA为成分的复配缓蚀剂对黄铜的缓蚀作用,并同BTA单独使用时的缓蚀效果比较,发现这种复配缓蚀剂有更优的缓蚀性能,并通过实验找出了两种缓蚀剂的最佳配比:在总浓度为5 mg/L和质量比DG1:BTA=3:2时缓蚀效果最好,使用最经济,通过极化曲线分析,复配缓蚀剂为偏阳极混合型缓蚀剂.
参考文献
[1] | 王佳,曹楚南,陈家坚.缓蚀剂理论与研究方法的进展[J].材料保护,1992,4(2):79. |
[2] | 邢巍,郭渡,单义斌,等.金属缓蚀剂Langmuir-Blodgett膜及缓蚀机理的研究[J].中国腐蚀与防护学报,1995,15(1):1. |
[3] | 甘复兴,戴忠旭,汪的华,等.中性介质中缓蚀剂的成膜过程[J].应用化学,1998,15(4):45. |
[4] | Tremont R,De Jesua S-Cardona H,Garcia A-Orozco J,et al.3-Mercaptopropyltrimethoxysilane as a Cu corrosion inhibitor in KCl solution[J].Journal of Applied Electrochemistry,2000,30(6):737. |
[5] | 高立新,张大全,陆柱,等.含苯并三氮唑单元的铜缓蚀剂制备和缓蚀作用[J].华东理工大学学报,2001,27(1):84. |
[6] | Tremont R,Cabrera C R.Electrochemical and surface analysis study of copper corrosion protection by 1 & hyphen; propanethiol and propyltrimethoxysilane: A comparison with 3‐mercaptopropyltrimethoxysilane[J].Journal of Applied Electrochemistry,2002,32 (7):783. |
[7] | Helena Otmacic,Ema Stupnisek-Lisac.Copper corrosion inhibitors in near neutral media[J].Electroche mical Acta,2003,48(8):985. |
[8] | GB/10124-88.金属材料实验室均匀腐蚀全浸实验方法[S]. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%