非晶态钎料具有长程无序、近程有序的结构特点，使它具有许多优异的性能，如高硬度、高强度、强耐蚀性等。同时，获得的薄带状钎料适用于窄间隙焊接，在宇航、军工、体育器材、电子仪表等领域中具有较广泛的应用前景。为阐明非晶态钎料在钎焊发展过程中的重要意义，综合评述了非晶态钎料的成分优化设计，钎料特性、钎焊工艺及方法等方面的研究进展和面临的挑战，并指出该领域今后的发展方向。
As a new type of filler metal,amorphous alloy has the liquid-like structure,i.e.long-range disorder and short-range order.Such structural featureenables multiple advantages including high strength,hardness, and corrosion resistance et al.Quenched ribbons can also used for narrow-gap welding.The amorphous filler metal shows prospect in fields such as aerospace,military industry,sport equipment,and electronic instrument and so on.In order to illustrate the significance of amorphous filler metal for the development of brazing tech-nology,the research progress in aspects of composition optimization,characterization of filler metals,processes and methods was reviewed.The faced challenges and investigation tendency of amorphous filler metals were also summarized.
参考文献
| [1] | 汪卫华.非晶态物质的本质和特性[J].物理学进展,2013(05):177-351. |
| [2] | Bai Y W;Bian X F;Qin J Y et al.Local atomic struc-ture inheritance in Ag50 Sn50 melt[J].Journal of Applied Physics,2014,115:043506-0431-5. |
| [3] | Bao Lin;Xiufang Bian;Pan Wang;Guanping Luo .Application of Fe-based metallic glasses in wastewater treatment[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2012(1):92-95. |
| [4] | Yang C C;Bian X F;Yang J F .Enhancing the efficiency of wastewater treatment by addition of Fe-based amor-phous alloy powders with H2 O2 in ferrofluid[J].Funct Mater Lett,2014,7(03):1450028. |
| [5] | Decristofaro N;Henschel C .Metglas brazing foil[J].Welding Journal,1978,57(07):33-38. |
| [6] | D’Silva T L .Partially amorphous silver-coper-indium brazing foil[P].US:US4182628 A,1978. |
| [7] | Zou J S;Xv X P;Wang L .Effect of micro B on wettabili-ty of Cu-P based quenching filler metals[J].Transactions of the China Welding Institution,2011,32(09):69-72. |
| [8] | 路文江,刘生满,俞伟元,陈学定.快速凝固Al-Cu-Si薄带钎料真空钎焊锻铝合金的研究[J].甘肃工业大学学报,2002(03):1-3. |
| [9] | Zhang X P;Shi Y W;Ren Y W .The crystallization be-havior of polyatomic amorphous brazing filler metal alloy-Ni82.5 Cr7 Si4.5 B3 Fe3 and its vacuum brazing performance[J].Journal of Xi’an Jiaotong University,1993,27(05):57-64. |
| [10] | Schubert TH.;Teresiak A.;Mattern N.;Bauer HD.;Loser W. .PREPARATION AND PHASE TRANSFORMATIONS OF MELT-SPUN AL-GE-SI BRAZING FOILS[J].Journal of Materials Science,1997(8):2181-2189. |
| [11] | Wooten F A .Computer-generated model of the crystal-line/amorphous interface in silicon[J].J Non-cryst Sol,1989,114:681-683. |
| [12] | 甘贵生,杜长华,甘树德.电子微连接高温无铅钎料的研究进展[J].功能材料,2013(z1):28-35,40. |
| [13] | 俞伟元,陈学定,路文江,王艳红.快速凝固钎焊薄带[J].焊接技术,2006(03):2-4. |
| [14] | Wu X.;Chandel R.S. .Induction brazing of Inconel 718 to Inconel X-750 using Ni-Cr-Si-B amorphous foil[J].Journal of Materials Processing Technology,2000(1/2):34-43. |
| [15] | Yasuyuki M;Tadashi A .Brazeability of nickel base bra-zing foil on nickel base alloy and a mild steel[J].J Jpn Weld Soc,1992,10(03):50-56. |
| [16] | Hua-Ping Xiong;Wei Mao;Yong-Hui Xie .Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si, B)CrTi filler metal[J].Materials Letters,2007(25):4662-4665. |
| [17] | Frank Y .Metallic glass foil solves j et engine brazing problem[J].Design News,1986,42(18):94-95. |
| [18] | Xinjian Yuan;Chung Yun Kang;Myung Bok Kim .Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni-Si-B filler metal[J].Materials Characterization,2009(9):923-931. |
| [19] | J.Cao;X.G. Song;C. Li.Brazing ZrO_2 ceramic to Ti-6Al-4V alloy using NiCrSiB amorphous filler foil: Interfacial microstructure and joint properties[J].Materials Characterization,2013:85-91. |
| [20] | 邹家生,李华其,王超.含硼Cu-P基非晶钎料钎焊紫铜接头的连接强度及微观组织[J].江苏科技大学学报（自然科学版）,2012(01):23-26. |
| [21] | Yu W Y .The research on brazing capability and bonding mechanism of amorphous filler metal[D].Lanzhou:Lanzhou University of Technology,Doctoral disserta-tion,2009. |
| [22] | Jiasheng Zou;Zhiguo Jiang;Qizhang Zhao;Zheng Chen .Brazing of Si_3N_4with amorphous Ti_(40)Zr_(25)Ni_(15)Cu_(20)filler[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):155-160. |
| [23] | Ganjeh, E.;Sarkhosh, H..Microstructural, mechanical and fractographical study of titanium-CP and Ti-6Al-4V similar brazing with Ti-based filler[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:119-129. |
| [24] | 许鹏,康慧,曲平.镧对钛基钎料钎焊Ti3Al和GH536的影响[J].中国稀土学报,2007(02):253-256. |
| [25] | 俞伟元,陈学定,路文江.快速凝固Al-Si-Cu基钎料的性能[J].焊接学报,2004(02):69-72. |
| [26] | Schubert TH.;Teresiak A.;Mattern N.;Bauer HD.;Loser W. .PREPARATION AND PHASE TRANSFORMATIONS OF MELT-SPUN AL-GE-SI BRAZING FOILS[J].Journal of Materials Science,1997(8):2181-2189. |
| [27] | 俞伟元,路文江,陈学定,宋强.快速凝固Al-Cu-Si薄带钎料的制备及其性能[J].甘肃工业大学学报,2002(02):15-18. |
| [28] | 赵其章,喻军,赵宏权,邹家生.Al-Si-Cu-Zn急冷钎料制备及润湿性[J].江苏科技大学学报（自然科学版）,2007(05):31-35. |
| [29] | 朱翔,杨成刚,常迅伟.一种低熔点铝合金硬钎料的研究[J].热加工工艺,2012(17):128-129,133. |
| [30] | Akihisa Inoue;Nobuyuki Nishiyama .Preparation of Bulk Glassy Pd_(40)Ni_(10)Cu_(30)P_(20) Alloy of 40 mm in Diameter by Water Quenching[J].Materials transactions,1996(2):181-184. |
| [31] | Takeshi Terajima;Kazuhiro Nakata;Yuji Matsumoto;Wei Zhang;Hisamichi Kimura;Akihisa Inoue .Brazing of Cu with Pd-based metallic glass filler[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2008(1/3):128-131. |
| [32] | Jung G. Lee;Y.H. Choi;J.K. Lee .Low-temperature brazing of titanium by the application of a Zr-Ti-Ni-Cu-Be bulk metallic glass (BMG) alloy as a filler[J].Intermetallics,2010(1):70-73. |
| [33] | Jung G. Lee;G.H. Kim;M.K. Lee .Intermetallic formation in a Ti-Cu dissimilar joint brazed using a Zr-based amorphous alloy filler[J].Intermetallics,2010(4):529-535. |
| [34] | M.K. Lee;J.G. Lee;K.H. Kim;C.H. Lim;C.K. Rhee;C.H. Park .Amorphous sputter coating of a multi-component Zr-Ti-Ni-Cu alloy as a filler for brazing Zircaloy-4[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2012(1/3):9-15. |
| [35] | Chen H Y;Cao J;Song X G et al.Characterization,removal and evaluation of oxide film in the diffusion bonding of Zr55 Cu30 Ni5 Al10 bulk metallic glass[J].Journal of Materials Science and Technology,2014,30(07):722-730. |
| [36] | 莫文剑,王志法,姜国圣,王海山.Au-Ag-Si新型中温共晶钎料的研究[J].稀有金属材料与工程,2005(03):497-500. |
| [37] | Rabinkin A;Datta A;Bose D .Rapidly solidified copper-phosphorus base brazing foils[J].Welding Journal,1984,63:14-19. |
| [38] | Zhang B W;Tan Z S;Zhang H et al.Fundamental re-search for Cu-P based amorphous filler alloys[J].Transactions of the China Welding Institution,1992,13(01):133-139. |
| [39] | Tamai T;Naka M .Ag effect on microstructures and strength of Si3 N4/Si3 N4 joint brazed with Cu-Ag-Ti fill-er metals[J].Metal Sci Lett,1996,15:1353-1354. |
| [40] | Maksymova S;Khorunov V;Zelinskaya G .Structure of Cu-Ti brazing filler metal in amorphous and crystalline states[J].J Phys Conf Ser,2008,98:012010. |
| [41] | 王智慧,路文江,俞伟元,徐成.非晶Cu-Ni-Sn-P钎料钎焊紫铜气孔敏感性研究[J].热加工工艺,2008(11):8-10. |
| [42] | ?erban V A;Codrean C;U?u D et al.Amorphous al-loys for brazing copper based alloys[J].J Phys Conf Ser,2009,144:012098-0121-4. |
| [43] | Zou J S;Wang C;Xv X P et al.Bonding mechanism of brazing of amorphous Cu-P filler metal[J].Transactions of the China Welding Institution,2011,32(12):33-36. |
| [44] | Dong Hongguang;Yang Zhonglin;Wang Zengrui.CuTiNiZrV amporphous alloy foils for vacuum brazing of TiAl alloy to 40Cr steel[J].Journal of Materials Science and Technology,2014 |
| [45] | Szewieczek D;Tyrlik-Held J .Designing the brazed joint properties with application of amorphous tapes as a filler metal[J].Journal of Materials Processing Technology,1995,53:405-412. |
| [46] | Kalin BA;Fedotov VT;Sevrjukov ON;Moeslang A;Rohde M .Development of rapidly quenched brazing foils to join tungsten alloys with ferritic steel[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(0):1544-1548. |
| [47] | 张贵锋,张建勋,裴怡,徐健.Ni基及Fe基非晶态箔带钎料对碳素钢管的润湿行为[J].焊接学报,2006(07):61-64. |
| [48] | Wu Na;Li Yajiang;Ma Qunshuang .Microstructure evolution and shear strength of vacuum brazed joint for super-Ni/NiCr laminated composite with Ni-Cr-Si-B amorphous interlayer[J].Materials & design,2014(Jan.):816-821. |
| [49] | Park C H;Han Y S;Kim Y K et al.Thermal stability and brazing characteristics of Zr-Be binary amorphous filler metals for zirconium alloy[J].Journal of Nuclear Materials,1998,254(1,2):34-41. |
| [50] | Han Y S;Park C H;Jang K J et al.Thermal stability and brazing characteristics of Zr0.7-x Mx Be0.3(M=Ti or Nb)binary amorphous filler metals for zirconium alloy[J].Journal of Nuclear Materials,1999,270:334-341. |
| [51] | K.B. Kim;J.G. Lee;J.K. Lee;S.W. Son;M.K. Lee;S.J. Kim;C.K. Rhee .Formation of reactive layers in brazed Ti and Cu using a melt-spun Zr_(41.2)Ti_(13.8)Ni_(10.0)Cu_(12.5)Be_(22.5) alloy[J].Materials Letters,2008(30):4483-4485. |
| [52] | Kuroda T;Shimada M .Micro flash butt welding of super duplex stainless steel with Zr-based metallic glass insert[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2008(1):153-156. |
| [53] | Kim, K.H.;Lim, C.H.;Lee, J.G.;Lee, M.K.;Rhee, C.K. .Growth and microstructure formation of isothermally-solidified Zircaloy-4 joints brazed by a Zr-Ti-Cu-Ni amorphous alloy ribbon[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2013(1/3):59-66. |
| [54] | M.K. Lee;K.H. Kim;J.G. Lee.Growth of iso thermally-solidified titanium joints using a multi-component Zr-Ti-Cu-Ni-Be amorphous alloy as a brazing filler[J].Materials Characterization,2013:98-104. |
| [55] | Botstein O;Schwarzman A;Rabinkin A .Induction bra-zing of Ti-6Al-4V alloy with amorphous 25Ti-25Zr-50Cu brazing filler metal[J].Material Science and Engineering,1995,A206:14-23. |
| [56] | 蒋志国,邹家生.Ti-Zr-Ni-Cu非晶钎料钎焊Si3N4陶瓷的连接强度[J].中国有色金属学报,2006(11):1955-1959. |
| [57] | Yuhua Liu;Jiandong Hu;Yaping Zhang;Zuoxing Guo;Yue Yang .Joining of Zirconia and Ti-6Al-4V Using a Ti-based Amorphous Filler[J].Journal of materials science & technology,2011(7):653-658. |
| [58] | 高飞,朱栋,许祥平,邹家生.TiZrCuB非晶钎料性能及在Si3N4陶瓷上的润湿性研究[J].江苏科技大学学报（自然科学版）,2011(04):326-329,337. |
| [59] | Y.H. Liu;J.D. Hu;P. Shen;X. H. Han;J.C. Li .Microstructural and mechanical properties of jointed ZrO_2/Ti-6Al-4V alloy using Ti_33Zr_17Cu_50 amorphous brazing filler[J].Materials & design,2013(May):281-286. |
| [60] | Luo W;Wang L T;Wang Q M et al.A new filler met-al with low contents of Cu for high strength aluminum alloy brazed joints[J].Materials and Design,2014,63:263-269. |
| [61] | Chen, SJ;Tang, HJ;Jing, XT .Transient liquid-phase bonding of T91 steel pipes using amorphous foil[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):114-117. |
| [62] | J. A. Verduzco;J. Gonzalez-Sanchez;V. H. Verduzco;J. Solis;J. Lemus-Ruiz .Microstructure and electrochemical properties of the bonding zone of AISI 316L steel joined with a Fe-based amorphous foil[J].Journal of Materials Processing Technology,2010(8):1051-1060. |
| [63] | 韩逸生,邹家生,陈铮,汪先华.Ag-P-Cu钎料中Ag的作用分析[J].焊接技术,2000(03):23-24. |
| [64] | Guo Z L.Joining technology for ceramic and metal[J].Material Development and application,1994(06):41-44. |
| [65] | Xian A P;Si Z Y.Behaviour of buffer layer in joining of-Sialon ceramics to 40Cr steel[J].Acta Metallurgica Sin-ica,1991(06):421-425. |
| [66] | 路文江,金彦枫,俞伟元,陈学定.快速凝固Al-Cu钎料钎焊铝Cu对钎缝组织的影响[J].兰州理工大学学报,2005(02):9-12. |
| [67] | R. Soltani Tashi;S.A.A. Akbari Mousavi;M. Mazar Atabaki .Diffusion brazing of Ti-6Al-4V and austenitic stainless steel using silver-based interlayer[J].Materials & design,2014(Feb.):161-167. |
| [68] | 张恒,张邦维,谭肇升.Cu87.6-xN18.3Sn4.1Px非晶钎料焊接态相分析[J].稀有金属材料与工程,1992(02):76-78. |
| [69] | Illgen L;Mühlbach H;L?ser W et al.Preparation of ductile Al Ge soldering foils by PFC technique[J].Ma-ter Sci Engin A,1991,133:738-741. |
| [70] | Hidemi Kato;Seung-Geun Yu;Albertus D. Setyawan .Surface-activated supercooled liquid brazing[J].Scripta materialia,2013(9):699-702. |
| [71] | Bai Y W;Bian X F;Lv X Q et al.Heredity of medium-range order structure from melts to amorphous solids[J].Journal of Applied Physics,2012,112:083524. |
| [72] | Lin S B;Song J L;Yang C L et al.Brazability of dis-similar metals tungsten inert gas butt welding-brazing between aluminum alloy and stainless steel with Al-Cu filler metal[J].Materials and Design,2010,31:2637-2642. |
| [73] | Chang S Y;Tsao L C;Lei Y H et al.Brazing of 6061aluminium alloy/Ti-6Al-4V using Al-Si-Cu-Ge filler metals[J].Journal of Materials Processing Technology,2012,212:8-14. |
| [74] | Shang J L;Yan J Z;Li N .Brazing W and Fe-Ni-Co alloy using Ag-28Cu and Ag-27Cu-3.5Ti fillers[J].Journal of Alloys and Compounds,2014,611:91-95. |
| [75] | Xue Z M;Wang Q J;Qu W Q.Experimental in-vestigation for high-frequency induction brazing process of Ti alloy and stainless steel[J].Aerospace Manufac-turing Technology,2004(06):31-35. |
| [76] | 李明高,孙大千,邱小明.TiNi形状记忆合金与不锈钢激光钎焊接头界面组织特征[J].中国有色金属学报,2007(03):373-377. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%