欢迎登录材料期刊网

材料期刊网

高级检索

利用相转移法,通过控制溶剂蒸发温度制备了不同孔隙结构的聚酰胺(PA)多孔膜,用扫描电镜(SEM)和材料力学试验机对不同孔隙结构的PA多孔膜的形貌和力学性能进行了表征.将PA 多孔膜与类成骨细胞(MG63)共培养来考察不同孔隙结构多孔膜的细胞生物学响应.结果表明,随着溶剂蒸发温度升高,制备的PA多孔膜孔径大小逐渐增大,在40℃下制备的多孔膜孔隙结构均匀,孔径为10~20μm,其弹性模量与拉伸强度分别达到(20.2±0.9)和(5.2±0.5)MPa.细胞实验表明,与40℃下制备的PA多孔膜共培养后,细胞在其表面伸展爬行,形态结构完整,增殖明显.具有可控特性的 PA 多孔膜能够满足其在骨组织引导再生临床中的应用.

The porous polyamide (PA)membranes with different structure were prepared using phase-inversion technique by controlling the temperature of solvent evaporation.The morphologies and mechanical properties of the porous membrane were characterized by SEM and universal mechanical testing machine.The cytological properties of the porous membranes were studied in vitro by co-cultured with osteoblast-like MG63 cells.The results showed that the pore size of the PA membranes was increasing with the increasing of the treatment tem-perature.The uniform pores was obtained and the average pore size was 10 to 20μm when heated at 40 ℃.The elastic modulus and tensile strength reach (20.2±0.9)and (5.2±0.5)MPa,respectively.The cytological exper-iments demonstrated that the porous membranes displayed favorable cytocompatibility.After co-cultured with the PA membranes prepared at 40 ℃,porous membranes acted as a good matrix for MG63 adhesion,crawl and proliferation.The cytocompatibility,tunable mechanical properties,hydrophilicity of the porous membranes cauld meet the requirement of guided bone regeneration.

参考文献

[1] Wang H;Zuo Y;Zou Q;Cheng L;Huang D;Wang L;Li YB .Nano-Hydroxyapatite/Polyamide66 Composite Tissue-Engineering Scaffolds with Anisotropy in Morphology and Mechanical Behaviors[J].Journal of Polymer Science, Part A. Polymer Chemistry,2009(3):658-669.
[2] 黄棣,李吉东,左奕,邹琴,王华楠,李玉宝.壳聚糖修饰纳米羟基磷灰石/聚酰胺复合多孔支架的制备及性能研究[J].功能材料,2009(07):1175-1178.
[3] Wang H;Li Y;Zuo Y;Li J;Ma S;Cheng L .Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering.[J].Biomaterials,2007(22):3338-3348.
[4] Yibing Cai;Xiaolin Xu;Chuntao Gao;Tianyu Bian;Hui Qiao;Qufu Wei.Structural morphology and thermal performance of composite phase change materials consisting of capric acid series fatty acid eutectics and electrospun polyamide6 nanofibers for thermal energy storage[J].Materials Letters,2012:43-46.
[5] Huang D;Zuo Y;Zou Q;Wang Y;Gao S;Wang X;Liu H;Li Y .Reinforced nanohydroxyapatite/polyamide66 scaffolds by chitosan coating for bone tissue engineering.[J].Journal of biomedical materials research, Part B. Applied biomaterials,2012(1):51-57.
[6] Di Huang;Yi Zuo;Jidong Li .Bioactive composite gradient coatings of nano-hydroxyapatIte/polyamIde66 fabricated on polyamIde66 substrates[J].Journal of the Royal Society Interface,2012(TN.72):1450-1457.
[7] Li Jidong;Man Yi;Zuo Yi et al.In vitro and In vivo evaluation of a nHA/PA66 composite membrane for guided bone regeneration[J].Journal of Biomaterials Sci-ence Polymer Edition,2011,22(1-3):263-275.
[8] Li, J.;Zuo, Y.;Man, Y.;Mo, A.;Huang, C.;Liu, M.;Jansen, J.A.;Li, Y. .Fabrication and biocompatibility of an antimicrobial composite membrane with an asymmetric porous structure[J].Journal of biomaterials science,2012(1/4):81-96.
[9] Jidong Li;Yi Zuo;Xianmiao Cheng;Weihu Yang;Huanan Wang;Yubao Li .Preparation and characterization of nano-hydroxyapatite/polyamide 66 composite GBR membrane with asymmetric porous structure[J].Journal of Materials Science. Materials in Medicine,2009(5):1031-1038.
[10] 陈宝林,王东安,封麟先.组织工程材料表面拓扑结构对其细胞相容性的影响[J].中国组织工程研究与临床康复,2007(18):3653-3656.
[11] Chen Baolin;Wang Dongan;Feng Linxian .Effects of phys-ical and chemical properties of tissue engineerd materials surface on cellcompatibility[J].Journal of Clinical Rehabili-tative Tissue Engineering Research,2007,11(01):197-200.
[12] Seyed-Iman Roohani-Esfahani;Yongjuan Chen;Jeffrey Shi;Hala Zreiqat .Fabrication and characterization of a new, strong and bioactive ceramic scaffold for bone regeneration[J].Materials Letters,2013(Sep.15):378-381.
[13] Lee S J;Khang G;Lee Y M et al.The effect of surface wettability on induction and growth of neuritis from the PC-12 cells on a polymer surface[J].Journal of Colloid and Interface Science,2003,259:228-235.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%