采用半连续种子乳液聚合法制备了5种不同核壳比(核层和壳层的质量比分别为10/0、8/2、7/3、6/4、5/5)的聚丙烯酸酯乳液.用旋转流变仪研究了核壳比对聚丙烯酸酯塑溶胶流变-凝胶化转变行为的影响,并用动态光散射(DLS)和扫描电镜(SEM)对乳胶粒子的大小、形貌和塑溶胶胶膜表面进行表征.流变测试结果表明增塑后体系粘度随着剪切速率的增大而减小,呈非牛顿流体行为;乳胶粒子核壳比越大,增塑后体系的粘度越大,凝胶点温度越低,塑溶胶的储存期越短;频率扫描显示随着扫描频率的增加凝胶体系的粘弹性模量近似线性缓慢增加,说明此凝胶体系的稳定性较好.
参考文献
| [1] | Toshihiro Kasai N .Acrylic polymer fine particles and plastisol using the same[P].US:6433048,2002-08-13. |
| [2] | Kasai T C .Fine acrylic polymer particles and plastisol containing the same[P].EP:1162217,2008-12-24. |
| [3] | 程增会,张明明,王春鹏,储富祥.聚丙烯酸酯微球塑性溶胶的流变性能[J].高分子材料科学与工程,2012(09):95-99. |
| [4] | 王国军,王晶.汽车底盘涂料用核壳结构聚丙烯酸酯乳液的制备与性能研究[J].上海涂料,2011(08):1-5. |
| [5] | 程增会,于向东,陈鹏鹏,王春鹏,储富祥.不同增塑剂制备的丙烯酸醋增塑溶胶的性能研究[J].涂料工业,2011(02):76-79. |
| [6] | Garcia JC.;Marcilla A. .Rheological study of the influence of the plasticizer concentration in the gelation and fusion processes of PVC plastisols[J].Polymer: The International Journal for the Science and Technology of Polymers,1998(15):3507-3514. |
| [7] | Zoller A;Marcilla A .Rheometric study of the gelation and fusion processes of poly (vinyl chloride-co-vinyl acetate) plastisols with different commercial plasticizers[J].Journal of Vinyl and Additive Technology,2012,18(01):1-8. |
| [8] | Nakajima N;Harrell E .Rheological observation of gelation and fusion process of poly (vinyl chloride) plastisol[J].Advances in Polymer Technology,1986,6(04):409-440. |
| [9] | Ferry J D.Viscoelastic properties of polymers[M].New York:John Wiley and Sons,Inc,1980:264-289. |
| [10] | Chambon F;Winter H H .Linear viscoelasticity at the gel point of a crosslinking PDMS with imbalanced stoichiometry[J].Jrheol,1987,31(08):683-697. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%