采用失重法评价了静置或旋转条件下,不同蒸汽氧化处理及氧化+离子硫氮共渗复合处理的H13钢试样在750℃的ADC12铝液中的熔损性能.采用光学显微镜、X射线衍射仪分析了试样表面处理后生成的薄膜;分别用光学显微镜、能谱仪分析了熔损试样铁-铝界面组织和局部成分.蒸汽氧化试样显示了良好的熔损抗力,尤其是在动态旋转的情况下,这与表面薄膜的组成、性能、熔损机制等多种因素有关.
参考文献
[1] | Martin Sundqvist.Erosion,Corrosion and Soldering of Die Casting Dies as Related to Surface Coating.Symposium of Surfaces of Forming Tools[M].Karlstad,Sweden,1997(28-29):117-127. |
[2] | 吴玉道;王洁明.4Cr5Mo2MnV1Si钢的抗铝热熔损性能[J].模具工业,1992(11):48-50. |
[3] | 闵永安,许珞萍.表面处理对热作模具钢使用性能的影响[J].国外金属热处理,2002(02):13-18. |
[4] | M Pellizzari;A.Molinari;G.Straffelini .Thermal fatigue resistance of plasma duplex-treated tool[J].Surface and Coatings Technology,2001,142-144:1109-1115. |
[5] | C. Mitterer;F. Holler;F. Ustel;D. Heim .Application of hard coatings in aluminium die casting -- soldering, erosion and thermal fatigue behaviour[J].Surface & Coatings Technology,2000(1/3):233-239. |
[6] | Yongan Min;Luoping Xu;Xiaochun Wu.Influence of Surface Heat Treatment on Thermal Fatigue Behaviors of Hot Work Steel[A].Carlstad,Sweden,2002:55-66. |
[7] | 王建忠 .铝压铸模的侵蚀磨损机理[J].国外金属热处理,2000,21(04):51-56. |
[8] | Martin Sundqvist .Tribological Aspects of Hot Work Tool Steels in Contact with Aluminium[D].Doctoral Thesis.University of Houston,1994. |
[9] | 祝汉良,郭景杰,贾均.硅对压铸模与铝合金相互作用的影响[J].特种铸造及有色合金,1998(06):22-25. |
[10] | N J Simms;J.A.Little .High-Temperature Oxidation of Fe-2.25Cr-1Mo in Oxygen[J].Oxidation of Metals,1987,127(5-6):283-298. |
[11] | Z W Chen;D.T.Fraser;M.Z.Jahedi .Strictures of Intermetallic phases formed during immersion of H13 tool steel in an Al-11Si-3Cu die casting alloy melt[J].材料科学与工程学报,1999,A260:188-196. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%