采用金相显微镜(MEF3)、电子探针(EPMA)等研究TiC和TiAl3细化工业纯铝时TiAl3的存在对TiC在铝熔体中沉淀特性的影响规律,分析其影响机制.结果表明:TiC在铝熔体中单独存在时沉淀速率快,在较短时间保温后,大量TiC发生沉淀,从而限制其异质形核作用；当TiC和TiAl3在铝熔体中共同存在时,TiC沉淀速率变缓,在较长时间保温后,只有少量TiC发生沉淀,表现出较强形核能力和抗晶粒细化衰退能力.其影响机理是:TiAl3在铝熔体中增大了TiC粒子的沉降阻力,使得TiC粒子沉降速率变缓而在凝固时成为α(Al)的异质形核质点.Al Ti-C合金细化作用衰减是由TiC发生沉淀引起.
参考文献
| [1] | McCARTNEY D G .Grain refining of aluminium and its alloys using inoculants[J].International Materials Reviews,1989,34(05):247-260. |
| [2] | B. S. Murty;S. A. Kori;M. Chakraborty .Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying[J].International Materials Reviews,2002(1):3-29. |
| [3] | JONES G;PEARSON J .Factors affecting the grain-refinement of aluminum using titanium and boron additives[J].Metallurgical and Materials Transactions,1976,7(02):223-234. |
| [4] | A. M. Bunn;P. Schumacher;M. A. Kearns;C. B. Boothroyd;A. L. Greer .Grain refinement by Al-Ti-B alloys in aluminium melts: a study of the mechanisms of poisoning by zirconium[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1999(10):1115-1123. |
| [5] | Hang Li;T. Sritharan;H. P. Seow .Grain refinement of DIN226 alloy at high titanium and boron inoculation levels[J].Scripta materialia,1996(7):869-872. |
| [6] | 高泽生 .Al-Ti-C晶粒细化用中间合金的最新进展[J].轻合金加工技术,1998,26(10):5-11. |
| [7] | LI Jian-guo,HUANG Min,MA Mo,YE Wei,LIU Dong-yu,SONG Dong-ming,BAI Bing-zhe,FANG Hong-sheng.Performance comparison of AlTiC and AlTiB master alloys in grain refinement of commercial and high purity aluminum[J].中国有色金属学会会刊（英文版）,2006(02):242-253. |
| [8] | Liu XF.;Wang ZQ.;Zhang ZG.;Bian XF. .The relationship between microstructures and refining performances of Al-Ti-C master alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):70-74. |
| [9] | 王振卿,刘相法,柳延辉,张均燕,于丽娜,边秀房.Structural heredity of TiC and its influences on refinement behaviors of AlTiC master alloy[J].中国有色金属学会会刊(英文版),2003(04):790-793. |
| [10] | 李英龙,温景林,陈彦博,曹富荣,占国灿.SHS技术制备的Al-3Ti-0.15C晶粒细化剂[J].中国有色金属学报,2004(02):179-183. |
| [11] | 赵文军,丁万武,夏天东,候运丰.Al-Ti-C中间合金制备方法及细化机理研究现状[J].铸造技术,2008(11):1559-1562. |
| [12] | Iqbal N;van Dijk NH;Offerman SE;Geerlofs N;Moret MP;Katgerman L;Kearley GJ .In situ investigation of the crystallization kinetics and the mechanism of grain refinement in aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):18-32. |
| [13] | 肖政兵,邓运来,唐建国,陈祺,张新明.Al-Ti-C与Al-Ti-B晶粒细化剂的Zr中毒机理[J].中国有色金属学报,2012(02):371-378. |
| [14] | 王淑俊 .含Zr铝合金的细化“中毒”现象及其细化新工艺研究[D].山东大学,2009. |
| [15] | 夏天东,丁万武,赵文军,王晓军,徐仰涛.TiAl_3对TiC粒子在铝基体中分布及α（Al）晶粒形核的影响[J].中国有色金属学报,2009(11):1948-1955. |
| [16] | 丁万武,夏天东,赵文军,侯运丰.中间合金中第二相粒子TiC和TiAl3对纯铝的细化作用[J].中国有色金属学报,2009(06):1025-1031. |
| [17] | 严有为,刘生发,范晓明,傅正义,魏伯康.自蔓延高温合成Al-TiC晶粒细化剂及其晶粒细化效果[J].中国有色金属学报,2002(05):977-981. |
| [18] | 刘相法,边秀房.TiAl3在铝熔体中结构遗传的动力学研究[J].机械工程学报,1999(03):67. |
| [19] | 吴德海;任家列;陈森灿.近代材料加工原理[M].北京:清华大学出版社,1997:178-179. |
| [20] | L. Yu;X. Liu .Ti transition zone on the interface between TiC and aluminum melt and its influence on melt viscosity[J].Journal of Materials Processing Technology,2007(26):519-524. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%