使用5kg坩埚下拉式定向凝固设备,对Al-4.5度下一次枝晶间距的变化规律.结果表明:在其他凝固参数不变时,随着温度梯度的增大,一次枝晶逐渐变小,细密,挺直,基本呈平行状分布,同时计算的一次枝晶间距值与Hunt模型计算值接近,实验测得的一次枝晶间距的回归曲线为:y=2843478.3x2-70217.4x+543.8.用温度梯度较高的实验值来模拟时,可得到λ1=26.7G-0.5-135.9,一次枝晶间距λ1与G-0.5基本呈线性关系,这和Hunt模型分析结果一致.
参考文献
| [1] | SEKERKA R F .Morphological stability[J].Journal of Crystal Growth,1968,34:71-78. |
| [2] | 傅恒志,李新中,刘畅,苏彦庆,李双明,郭景杰.Ti-Al包晶合金定向凝固及组织选择[J].中国有色金属学报,2005(04):495-505. |
| [3] | 李强,李殿中,钱百年.凝固过程中枝晶组织形貌演变模拟进展[J].材料导报,2004(04):5-8. |
| [4] | PANPING ZHU;SMITH R W .Dynamic simulation of crystal growth by Monte Carlo method-Ⅱ.ingot microstructure[J].Acta Metallurgy,1992,40:3369. |
| [5] | 林鑫;黄卫东;丁国陆 等.一次枝晶间距的数值统计模型[J].金属学报,1997,33(05):449-454. |
| [6] | 李林蓄,林鑫,王猛,黄卫东.Al-3.6%Cu合金定向凝固一次枝晶间距选择[J].铸造技术,2008(07):891-895. |
| [7] | SOMBOONSUK K;MASON J T;TRIVEDI R .Interdendritic spacing:part Ⅰ.experimental studies[J].Metallurgical and Materials Transactions,1984,15A:967-975. |
| [8] | Gunduz M.;Cadirli E. .Directional solidification of aluminium - copper alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(2):167-185. |
| [9] | 翟慎秋;魏亚杰 .Sn-Pb合金的三次树枝晶生长[J].淄博学院学报(自然科学与工程版),2000,2(03):38-46. |
| [10] | 宋先跃,唐建新,刘振伟.定向凝固理论与技术的发展[J].热加工工艺,2009(15):59-62,65. |
| [11] | 王岩,张伟强,黄晓夏,张世英.Al-4.0%Cu合金定向凝固中热电磁流体动力学效应的数值模拟[J].热加工工艺,2009(13):12-15. |
| [12] | Weili Ren;Zhongming Ren;Kang Deng .Progress in Research on Solidification in a Strong Static Magnetic Field[J].Steel Research International,2007(5):373-378. |
| [13] | Li X;Fautrelle Y;Ren ZM .Influence of an axial high magnetic field on the liquid-solid transformation in Al-Cu hypoeutectic alloys and on the microstructure of the solid[J].Acta materialia,2007(4):1377-1386. |
| [14] | WANG JinCheng,LI JunJie,YANG YuJuan,ZHANG YuXiang,YANG GenCang.Phase field simulation of the interface morphology evolution and its stability during directional solidification of binary alloys[J].中国科学E辑（英文版）,2008(04):362-370. |
| [15] | 万刚,武保林,赵玉华,徐前刚.电流对Al-4.5%Cu合金定向凝固枝晶间距的影响[J].铸造,2005(11):1066-1068. |
| [16] | 刘海霞,司乃潮,吴强.不同拉伸速度对Al-5%Cu定向凝固组织的影响[J].铸造,2005(01):40-43. |
| [17] | Melo MLNM;Rizzo EMS;Santos RG .Predicting dendrite arm spacing and their effect on microporosity formation in directionally solidified Al-Cu alloy[J].Journal of Materials Science,2005(7):1599-1609. |
| [18] | 黄立国,张伟强.直流电场对Al-Cu共晶合金凝固组织的影响[J].材料工程,2004(10):36-38,41. |
| [19] | HUNT J D.Solidfication and casting of metals[M].London:The Metal Society,1979:99-108. |
| [20] | Hunt J.D.;Lu S.Z. .Numerical Modeling of Cellular/Dendritic Array Growth: Spacing and Structure Predictions[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(3):611-623. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%