采用电刷镀技术在中碳钢表面制备厚度约为10μm的In/Ni组合镀层.研究高真空环境下In/Ni组合镀层的减摩润滑机理和微观损伤过程,并考察不同滑动速率和法向载荷对其真空摩擦学性能的影响.结果表明:在高真空环境下,该组合镀层具有明显的减摩和抗黏附磨损性能;镀层的摩擦因数随着滑动速率和法向载荷的增大而减小;磨损率随着载荷的增加而增大,但不随滑动速率发生显著变化;该镀层在高真空下的磨损机制主要为黏着磨损和擦伤磨损.
参考文献
| [1] | 何小虎,韦莉.铟锡氧化物及其应用[J].稀有金属与硬质合金,2003(04):51-55,57. |
| [2] | Shigeyuki Seki;Yutaka Sawada;Toshikazu Nishide .Indium-tin-oxide thin films prepared by dip-coating of indium diacetate monohydroxide and tin dichloride[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2001(1/2):22-26. |
| [3] | ANNETTE P RICHARD;DOREEN D EDWARDS .Subsolidus phase relations and crystal structures of the mixed-oxide phases in the In2O3一WO3 system[J].Journal of Solid State Chemistry,2004,177:2740-2748. |
| [4] | Morikawa H.;Fujita M. .Crystallization and electrical property change on the annealing of amorphous indium-oxide and indium-tin-oxide thin films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(1):61-67. |
| [5] | 卢建红,旷亚非.铅锡合金镀层的润滑减摩性能研究[J].材料保护,2007(09):12-13,41. |
| [6] | 林春华;葛祥荣.电刷镀技术便览[M].北京:机械工业出版社,1991:307. |
| [7] | 温诗铸;黄平.摩擦学原理[M].北京:清华大学出版社,2008:390. |
| [8] | 徐进,朱旻昊,周仲荣,石心余,刘家浚.电刷镀铅-镍复合镀层微动磨损性能研究[J].中国表面工程,2002(01):29-31. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%