介绍了最新引进的我国第一套高合金钢连轧生产线及其所生产的GH4169合金φ20～φ55mm热轧细晶棒材的组织与性能.与传统的横列式轧机轧制的同规格棒材相比,该连轧工艺更易于获得晶粒均匀、适量δ相合理分布的细晶棒材;在所研究的规格范围内,晶粒度可稳定控制在10级左右,且工艺更稳定可控.因而,其轧棒具有更优良稳定的综合性能.同时产品尺寸精度和成材率均有较大幅度的提高.
The newly imported high-alloy steel continuous rolling line which was the first line in our country was introduced for about two years, and the microstructure and properties of GH4169 alloy hot-rolling bars produced by this line were studied, and the sizes of such bars were in the range of φ20-φ55mm.Comparing with the traditional horizontal roller, this continuous rolling technology was tend to get finer grain bar and the grains were more uniform and the δ-phase distributed properly.The specifications range, the grain size can be controlled about 10 grade and the process was more stable.So the rolled bars possess more stable and comprehensive properties.Meanwhile, the size precision and production rate of the products are both increased markedly.
参考文献
| [1] | 庄景云;杨锦炎;田耘.GH169合金中δ相与持久缺口敏感性的关系[J].北京科技大学学报,1991(增刊):177. |
| [2] | H.Yuan;W.C.Liu .Effect of the δ phase on the hot deformation behavior of Inconel 718[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):281-289. |
| [3] | Saied Azadian;Liu-Ying Wei;Richard Warren .Delta phase precipitation in Inconel 718[J].Materials Characterization,2004(1):7-16. |
| [4] | CAI Da-yong;ZHANG Wei-hong;NIE Pu-lin et al.Dissolution kinetics of δ-phase and its influence on the notch sensitivity of inconel 718[J].Materials Characterization,2007,58:220-225. |
| [5] | 庄景云;杜金辉;邓群.变形高温合金GH4169[M].北京:冶金工业出版社,2006 |
| [6] | MICHAEL WALTER;AMOLD TATSCHL.Processing of rolling technologies for alloy 718[A].Warrendale:The Minerals,Metals & Materials Society,2005:111. |
| [7] | 曹美华,陈国胜,周奠华,庞克昌.变形速度及晶粒度对GH4169合金高温拉伸性能和组织的影响[J].钢铁研究学报,2003(z1):361-365. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%