应用脂肪酸、钛酸酯偶联剂分别对纳米级碳酸钙(Nano-CaCO3)进行表面处理,并用熔融共混法制备PP/Nano-CaCO3复合材料.在室温条件下,测量PP/Nano-CaCO3复合材料的V型缺口冲击强度.采用投影覆盖法测算复合材料的冲击断口表面分维,考察断口表面分维与复合材料冲击强度的关系.结果表明,断口表面分维在2.3673～2.4120之间,相关系数均大于0.95,强的相关性说明断口表面分形特性显著;复合体系冲击强度与断口表面分维之间近似呈指数函数关系.
参考文献
| [1] | Machado F;Lima EL;Pinto JC;McKenna TF .In situ preparation of polypropylene/1-butene alloys using a MgCl2-supported Ziegler-Natta catalyst[J].European Polymer Journal,2008(4):1130-1139. |
| [2] | Fengyuan Yu;Hongbin Zhang;Hong Zheng;Wei Yu;Chixing Zhou .Experimental study of flow-induced crystallization in the blends of isotactic polypropylene and poly(ethylene-co-octene)[J].European Polymer Journal,2008(1):79-86. |
| [3] | K. Goma;M. Hund;M. Vucak .Amorphous calcium carbonate in form of spherical nanosized particles and its application as fillers for polymers[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):217-225. |
| [4] | Premalal HGB.;Ismail H.;Baharin A. .Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites[J].Polymer Testing,2002(7):833-839. |
| [5] | Mai KC.;Qiu YX.;Zeng HM.;Li ZJ. .Mechanical properties and fracture morphology of Al(OH)(3)/polypropylene composites modified by PP crafting with acrylic acid[J].Journal of Applied Polymer Science,2001(13):2617-2623. |
| [6] | Liang JZ .Tensile properties of hollow glass bead-filled polypropylene composites[J].Journal of Applied Polymer Science,2007(3):1697-1701. |
| [7] | LIANG J Z .Toughening and reinforcing in rigid inorganic particle filled polypropylene:A review[J].Journal of Applied Polymer Science,2002,83:1547-1555. |
| [8] | W.C.J.Zuiderduin;C.Westzaan;J.Huetink;R.J.Gaymans .Toughening of polypropylene with calcium carbonate particles[J].Polymer: The International Journal for the Science and Technology of Polymers,2003(1):261-275. |
| [9] | Chan CM.;Wu JS.;Li JX.;Cheung YK. .Polypropylene/calcium carbonate nanocomposites[J].Polymer: The International Journal for the Science and Technology of Polymers,2002(10):2981-2992. |
| [10] | Kun Yang;Qi Yang;Guangxian Li;Yajie Sun;Decai Feng .Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites[J].Materials Letters,2006(6):805-809. |
| [11] | Chun Lei Wu;Ming Qiu Zhang;Min Zhi Rong .Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites[J].Composites science and technology,2005(3/4):635-645. |
| [12] | MANDELBROT B B;PASSOJA D E;PAULLA A J.Fractal character of fracture surface of metals[J].Nature,1984(19):721-722. |
| [13] | 唐玮,朱华,王勇.应力腐蚀断口的分形行为[J].钢铁研究学报,2007(08):56-58. |
| [14] | 王金安,谢和平,田晓燕,Kwasniewsk M A.一种新的断裂表面分形测量方法[J].北京科技大学学报,1999(01):6-9. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%