采用碱性焦磷酸盐体系在电解铜箔上电镀Zn-Ni-Sn三元合金可改善铜箔表面的综合性能.通过研究主盐含量、pH值、温度、电流密度对镀层质量的影响,选择了合适的添加剂,并对其极化行为进行了研究,优化确定了电镀Zn-Ni-Sn三元合金的镀液组成和工艺条件.经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高.
参考文献
| [1] | 祝大同.世界及我国电解铜箔业的发展回顾[J].世界有色金属,2003(08):7-11. |
| [2] | 黄洁.铜箔的生产技术及发展趋向[J].铜业工程,2003(02):83-84. |
| [3] | 吴继烈.电解铜箔市场走势[J].有色金属工业,2003(01):55-56. |
| [4] | TAKAMI .Copper foil for printed circuit boards[P].USA 5304428,1994-04-19. |
| [5] | 祝大同.我国覆铜箔板业的发展与展望[J].绝缘材料通讯,2000(01):40-45. |
| [6] | 冷大光;胡京江;郭宗训 等.电解铜箔镀锌工艺的研究[J].金属学报,1998,34(11):1227-1229. |
| [7] | GAVRILA M;MILLET J P;MAZILLE H et al.Corrosion behaviour of zinc-nickel coating,electrodepositied on steel[J].Surface and Coatings Technology,1999,123(03):164-172. |
| [8] | G. Sheela;Malathy Phshpavanam;S. Pushpavanam .Zinc-nickel alloy electrodeposits for water electrolysis[J].International journal of hydrogen energy,2002(6):627-633. |
| [9] | ELKHATABI F;BENBALLA M;SARRETM et al.Dependence of coating characteristics on deposition potential for electrodepositied Zn-Ni alloy[J].Electrochimica Acta,1998,44(10):1645-1653. |
| [10] | 安茂忠.电镀理论与技术[M].哈尔滨:哈尔滨工业大学出版社,2004:178-197. |
| [11] | TAKAMI .Method of surface treatment of copper foil for printed circuit boards and copper foil for printed circuit boards[P].USA 5234573,1993-10-10. |
| [12] | 藤原和久;丹博司;藤井光南 等.具有优良的耐化学性和耐热性的用于印刷线路板的铜箔[P].CN 1260684A,2000-07-09. |
| [13] | A. Petrauskas;L. Grinceviciene;A. Cesuniene;R. Juskenas .Studies of phase composition of Zn-Ni alloy obtained in acetate-chloride electrolyte by using XRD and potentiodynamic stripping[J].Electrochimica Acta,2005(5):1189-1196. |
| [14] | 屠振密.电镀合金原理与工艺[M].北京:国防工业出版社,1993 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%