利用腐蚀实验、X-射线衍射分析和扫描电子显微镜分析研究了430、316、304不锈钢试样在高温密封的单质硫及硫化钠环境中的腐蚀规律,并在316不锈钢表面电镀Mn、Ni镀层探究其防护效果.结果表明,在高温密封的单质硫、硫化钠环境中不锈钢材料腐蚀速率的规律为:v(430不锈钢)＞v(304不锈钢)＞v(316不锈钢),且在硫化钠环境中的腐蚀更严重.镀镍对不锈钢的耐蚀性能没有提高,镀锰可以提高316不锈钢的耐高温硫腐蚀性能,腐蚀速率降为0.0166mm/a.
参考文献
| [1] | M. Spiegel.Salt melt induced corrosion of metallic materials in waste incineration plants[J].Materials and Corrosion,19997(7):373-393. |
| [2] | Akihiko Ito;Yu You;Hirokazu Katsui.Growth and microstructure of Ba p-alumina films by laser chemical vapor deposition[J].Journal of the European Ceramic Society,201313/14(13/14):2655-2661. |
| [3] | Natalia A. Canas;Kei Hirose;Brigitta Pascucci;Norbert Wagner;K. Andreas Friedrich;Renate Hiesgen.Investigations of lithium-sulfur batteries using electrochemical impedance spectroscopy[J].Electrochimica Acta,2013:42-51. |
| [4] | JOHN B. GOODENOUGH.Evolution of Strategies for Modern Rechargeable Batteries[J].Accounts of Chemical Research,20135(5):1053-1061. |
| [5] | 胡英瑛;温兆银;芮琨;吴相伟.钠电池的研究与开发现状[J].储能科学与技术,2013(2):81-90. |
| [6] | 潘宝风;杨东梅;刘徐慧;陈颖祎;李洪波.元坝含硫气井油套环空腐蚀行为及机理分析[J].广东化工,2013(13):55-56,32. |
| [7] | 汪峰;杜晓东;吴辰;蒋延涛.FV（520）B不锈钢高温高压条件下硫化腐蚀初始阶段机理研究[J].表面技术,2014(6):16-21,58. |
| [8] | L.W. Tsay;Y.J. Lin;C. Chen.The effects of rolling temperature and sensitization treatment on the sulfide stress corrosion cracking of 304L stainless steel[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2012Oct.(Oct.):267-274. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%