在普通钢板上熔盐电积沉Al-Mn非晶态合金,熔盐组成为:AlCl3:KCl:NaCl=2:0.5:0.5(摩尔比).讨论了阴极电流密度、电镀温度等参数对铝锰非晶合金沉积速度的影响;当阴极电流密度达到42mA/cm2时,沉积速度达到1.4g/m2.min,之后则成反比关系;当温度达到490K时,电镀时间为12min,沉积速度达到1.4g/m2.min,之后沉积速度趋于平稳并略有降低.
参考文献
| [1] | Stafford G R;Grushko B;McMichael R D .The electrodeposition of Al-Mn ferromagnetic phase from molten salt electrolyte[J].Journal of Alloys and Compounds,1993,200:107-113. |
| [2] | Benjamin Grushko;Gery R .Stafford.Phase Pormation in electrodeposited and thermally annealed Al-Mn alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21:2869-2878. |
| [3] | Takayama T;Seto H;Uchida J et al.Local structure and concentration in Al-Mn alloy electrodeposits[J].Journal of Applied Electrochemistry,1994,24:131-138. |
| [4] | Moffat T P;Stafford G R;Hall D E .Pill Corrosion of electrodeposited Aluminum-Manganese Alloys[J].Journal of the Electrochemical Society,140(10):2779-2786. |
| [5] | Benjamin Grushko;Gery R .Stafford.Structural study of electrodeposited Aluminum-Manganese alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,20(08):1351-1359. |
| [6] | Jun-ichi Uchiha .Electroplating of Amorphous Al-Mn Alloy from Molten Salts[J].ISIJ International,1993,33:1029-1036. |
| [7] | 安捷洛夫.纯化学试剂[M].北京:高等教育出版社,1989 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%