通过建立模型,分析了物料在螺旋挤压过程中的运动及受力情况,结合物料的挤压流变特性,导出了螺旋挤压产生的挤压力与螺旋几何和螺旋工作参数之间的函数关系式.确定了物料实现顺利挤出通过挤压机的机头和机嘴部分所需的压力.在此基础上,提出了螺旋挤压成型机的设计准则,并运用研究结果进行了实际螺旋挤压机的设计和使用,实践证明了理论分析的正确性和可靠性.
参考文献
| [1] | Rauwendaal Chris .New directions for extrusion:compounding with single screw extruders[J].Plastics Additives and Compounding,2002,4(06):24-27. |
| [2] | B(o)hm H;Blackburn S .Single screw extruders[J].Plastics Additives and Compounding,1999,1(03):27-29. |
| [3] | Holmes M .Innovation brings high shear mixing for single screw extruders[J].Plastics Additives and Compounding,1999,1(01):30-31. |
| [4] | 张柏清;林云万.陶瓷工业机械与设备[M].北京:中国轻工业出版社,1999:73-98. |
| [5] | Englander A.;Blackburn S.;Burbidge A. .A preliminary evaluation of single screw paste extrusion[J].Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers,2000(A5):790-794. |
| [6] | A. J. Botten;A. S. Burbidge;S. Blackburn .A model to predict the pressure development in single screw extrusion[J].Journal of Materials Processing Technology,2003(2/3):284-290. |
| [7] | Benhow J J .The dependence of output rate on the die shape during catalyst extrusion[J].Chemical Engineering Science,1971,26:1467-1473. |
| [8] | BenhowJ J;Oxley E W;Bridgwater J .Prediction of paste extrusion pressure[J].American Ceramic Society Bulletin,1989,68(10):1821-1284. |
| [9] | Zheng J;William B;Carlson;Reed J S .Flow mechanics on extrusion through a square-entry die[J].Journal of the American Ceramic Society,1992,75(11):3011-3016. |
| [10] | Benbow J;Bridgwater J.Paste flow and extrusion[M].Oxford:clarendon Press,1993:10-13. |
| [11] | 励世鳌;杨道.电瓷生产机械设备[M].北京:机械工业出版社,1983:185-216. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%