对锆英石陶瓷的生产工艺对材料的显微结构、力学性能的影响进行了研究.结果表明:造粒粉颗粒的硬壳与空洞在坯体中形成大颗粒,如果在成型过程中末被完全破坏遗留在烧结体中而引起材料内部气孔的存在,使材料的力学性能明显下降.制定合理的锆英石材料生产工艺、控制气孔的产生,是提高材料强度和可靠性的有效措施.
参考文献
| [1] | 刘家臣,杜海燕,杨正方.喷雾造粒粉制备ZTM陶瓷的结构缺陷与强度研究[J].硅酸盐学报,2000(03):219-222. |
| [2] | Wu J M;Lin C M .Effect of CeO2 on reaction-sintered mullite-ZrO3 ceramics[J].Journal of Materials Science,1991,26:4631-4636. |
| [3] | Pena P;Miranzop;Moya J S .Muticomponent toughened ceramic materials abtained by reaction-sintering,part 1:ZrO2-Al2 O3 -SiO2-CaO system[J].Journal of Materials Science,1985,20:2011-2022. |
| [4] | Mosser B D;Reed J S;Varner J R.The effect of granule size on green strenyth distributions of dry-alumina compact[A].Westerville,OH:Am Ceram Soc,1988:767-775. |
| [5] | Richerson D W.Modem Ceramic Engineering[M].New York:Marcel Dekker,1982 |
| [6] | Becher P F .Microstructural design of toughened[J].Journal of the American Ceramic Society,1991,74(02):255. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%