先进结构陶瓷研究进展评述

硅酸盐通报 , 2005, 24(5): 91-101. doi: 10.3969/j.issn.1001-1625.2005.05.017

先进结构陶瓷研究进展评述

黄勇 ^1, , 张立明 ^2, , 汪长安 ^3, , 杨金龙 ^4, , 谢志鹏 ^5,

1.清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084

2.清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084

3.清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084

4.清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084

5.清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084

基金项目: 国家高技术研究发展计划(863计划)(2001AA337060) 国家重点基础研究发展计划(973计划)(G2000067204) 国家自然科学基金(5050232010)

关键词：结构陶瓷 , 研究进展 , 评述

Review on Research Progress of Advanced Structural Ceramics

评述了先进结构陶瓷的研究现状和发展趋势,重点介绍了近几年来先进结构陶瓷在超细粉体的制备、低成本复杂形状部件的成型新工艺、烧结技术、强化韧化机理以及新材料的研制等方面的最新研究进展.

参考文献

[1]	Sacks MD;Wang CA;Yang ZH;Jain A .Carbothermal reduction synthesis of nanocrystalline zirconium carbide and hafnium carbide powders using solution-derived precursors[J].Journal of Materials Science,2004(19):6057-6066.
[2]	G. Ziegler;D. Suttor .Engineering Ceramics from Preceramic Polymers[J].Key engineering materials,1999(161/163):103-106.
[3]	Quinelato AL.;Leite ER.;Bernardi MIB.;Varela JA.;Longo E. .Synthesis and sintering of ZrO2-CeO2 powder by use of polymeric precursor based on Pechini process[J].Journal of Materials Science,2001(15):3825-3830.
[4]	Jimenez B.;Pardo L.;Millan P.;Jimenez R.;Castro A. .Electric and ferro-piezoelectric properties of (SBN)(1-x)(BTN)(x), ceramics obtained from amorphous precursors[J].The journal of physics and chemistry of solids,2001(5):951-958.
[5]	理查德J布鲁克;清华大学新型陶瓷与精细工艺国家重点实验室.陶瓷工艺学(第Ⅱ部分)[M].北京:科学出版社,1999:6.
[6]	崔斌,杨祖培,侯育冬,史启祯,田长生.半化学法制备0.80Pb（Mg1/3Nb2/3）O3-0.20PbTiO3陶瓷的反应机理[J].无机材料学报,2002(04):737-744.
[7]	H. T. Kim;S. Nahm .Low-fired (Zn,Mg)TiO3 microwave dielectrics[J].Journal of the American Ceramic Society,1999(12):3476-3480.
[8]	S.T.Aruna;K.S.Rajam .Mixture of fuels approach for the solution combustion synthesis of Al_2O_3-ZrO_2 nanocomposite[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2004(2):157-167.
[9]	Deshpande K.;Mukasyan A.;Varma A. .Aqueous combustion synthesis of strontium-doped lanthanum chromite ceramics[J].Journal of the American Ceramic Society,2003(7):1149-1154.
[10]	Gopukumar O S;Chung K Y;Kim K B .Novel synthesis of layered LiNi1/2Mn1/2O2 as cathode material for lithium rechargeable cells[J].Electrochimica Acta,2004,49(05):803-810.
[11]	Kozhukharov V;Brashkova N;Machkova M.Ultrasonic spray pyrolysis for powder synthesis[J].Solar Energy,2003(90-91):553-557.
[12]	Nimmo W.;Hind D.;Ali NJ.;Hampartsoumian E.;Milne SJ. .The production of ultrafine zirconium oxide powders by spray pyrolysis[J].Journal of Materials Science,2002(16):3381-3387.
[13]	Jian-Feng Chen;Zhi-Gang Shen;Fang-Tao Liu;Xiao-Lin Liu;Jimmy Yun .Preparation and properties of barium titanate nanopowder by conventional and high-gravity reactive precipitation methods[J].Scripta materialia,2003(6):509-514.
[14]	贾宏,郭锴,郭奋,邹海魁,陈建峰.用超重力法制备纳米二氧化硅[J].材料研究学报,2001(01):120-124.
[15]	张俊宝,雷延权,温广武,周玉.纳米Si-B-O-N陶瓷粉末的合成与表征[J].材料科学与工艺,2003(03):230-232.
[16]	杨书廷,张焰峰,吕庆章,尹艳红,张明春,丁立,赵林治.纳米级 LiMn2O4尖晶石合成及电化学性能研究[J].无机材料学报,2000(02):309-314.
[17]	Huang Y;Ma T;Yang J L et al.Preparation of spherical ultrafine zirconia powder in microemulsion system and its dispersibility[J].Ceramics International,2004,30(05):675-681.
[18]	Enrico Traversa;Maria Luisa Di Vona;Silvia Licoccia;Michele Sacerdoti;Maria Cristina Carotta;Luigi Crema;Luigi Crema;Giuliano Martinelli .Sol-Gel Processed TiO_2-Based Nano-Sized Powders for Use in Thick-Film Gas Sensors for Atmospheric Pollutant Monitoring[J].Journal of Sol-Gel Science and Technology,2001(1/2):167-179.
[19]	答鸿,朱以华.核-壳式单分散二氧化硅磁性微球的制备[J].无机材料学报,2002(04):867-871.
[20]	李国军,赵世柯,黄校先,郭景坤.Ni包裹Al2O3复合粉体的制备[J].无机材料学报,2002(02):235-240.
[21]	李永利,乔冠军,金志浩.纳米BN包覆的Al2O3复合粉的制备及其烧结性能研究[J].硅酸盐学报,2002(04):491-495.
[22]	Grasset F.;Labhsetwar N.;Li D.;Park DC.;Saito N.;Haneda H.;Cador O. Roisnel T.;Mornet S.;Duguet E.;Portier J.;Etourneau J. .Synthesis and magnetic characterization of zinc ferrite nanoparticles with different environments: Powder, colloidal solution, and zinc ferrite-silica core-shell nanoparticles[J].Langmuir: The ACS Journal of Surfaces and Colloids,2002(21):8209-8216.
[23]	陈洪龄,王延儒,时钧.四氯化钛络合法制备单分散纳米二氧化钛[J].无机材料学报,2002(01):149-153.
[24]	Haiming Fan;Lintao Yang;Wenshen Hua .Controlled synthesis of monodispersed CuO nanocrystals[J].Nanotechnology,2004(1):37-42.
[25]	Tadao Sugimoto .Formation of Monodispersed Nano- and Micro-Particles Controlled in Size, Shape, and Internal Structure[J].Chemical Engineering & Technology: Industrial Chemistry -Plant Equipment -Process Engineering -Biotechnology,2003(3):313-321.
[26]	颜鲁婷,司文捷,苗赫濯,齐龙浩.Si3N 4粉体表面化学分析及表面改性[J].硅酸盐通报,2001(06):25-29,24.
[27]	张锐,高濂,虞玲,郭景坤.Cu颗粒包覆纳米SiC粉体的相分散性能分析[J].无机材料学报,2002(05):1059-1062.
[28]	Yong Huang;Liguo Ma;Jinlong Yang;Zhengjun Zhang .A New Approach to Preparing High-Performance Ceramic Parts with Complex Shapes: Aqueous Colloidal Injection Molding[J].Key engineering materials,2003(247):39-44.
[29]	J. Yang;C. Dai;Y. Huang .Controllable Forming Technology in Gelcasting[J].Materials Science Forum,2005(Pt.2):1325-1328.
[30]	T. Ma;Y. Huang;J. Yang .Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics[J].Materials Science Forum,2005(Pt.2):1305-1308.
[31]	余志勇 .先进陶瓷的挤出凝胶成型新工艺[D].北京:清华大学,2003.
[32]	Johnson S B;Dunstan D E .Rheology of cross-linked chistosan-alumina suspensions used for a new gelcasting process[J].Journal of the American Ceramic Society,2002,85:1699-1705.
[33]	Y.Chen and Y.Huang .Alumina casting based on gelation of gelatine[J].Journal of the European Ceramic Society,1999(2):271-275.
[34]	Z.P.Xie;J.L.Yang .Gelation forming of ceramic compacts using agarose[J].British Ceramic Transactions,1999(2):58-61.
[35]	Arnaldo J. Millán;M. Isabel Nieto;Rodrigo Moreno .Aqueous Gel-Forming of Silicon Nitride Using Carrageenans[J].Journal of the American Ceramic Society,2001(1):62-64.
[36]	王秀峰;罗宏杰.快速原型制造技术[M].北京:中国轻工业出版社,2001:15-20.
[37]	King D;Tansey T .Rapid tooling: selcctive laster sintering injection tooling[J].Journal of Materials Processing Technology,2003,132:42-48.
[38]	余志勇;黄勇;汪长安等.三维挤出凝胶技术无模成型Al2O3陶瓷[J].稀有金属材料与工程,2003,32(zk):167-170.
[39]	Z. Y. Yu;Y. Huang;D. J. Zhang .Freeform fabrication of Aqueous Alumina-Acrylamide Gelcasting Suspensions[J].Key engineering materials,2002(224/226):647-650.
[40]	饶平根,吴建青,叶建东,吕明.低温烧结Al2O3/3Y-TZP复合材料的力学性能[J].华南理工大学学报(自然科学版),2004(07):1-4.
[41]	李江,潘裕柏,宁金威,黄莉萍,郭景坤.纳米晶添加氧化铝粉体的低温烧结研究[J].无机材料学报,2003(06):1192-1198.
[42]	孙义海,张玉峰,郭景坤.3Y-TZP材料的液相烧结[J].硅酸盐通报,2003(02):3-6.
[43]	马利国 .陶瓷水基胶态注射成型新工艺的关键技术与应用研究[D].清华大学,2003.
[44]	Z.Xie and Y.huang .Microwave processing and properties of ceramics with different dielectric loss[J].Journal of the European Ceramic Society,1999(3):381-387.
[45]	张锐,高濂,江琳沁,郭景坤.微波烧结和常压烧结对Al2O3-ZrO2陶瓷磨损行为的影响[J].无机材料学报,2002(03):621-626.
[46]	张锐,符水龙,卢红霞,许红亮,韩东方,郑隆烈.影响ZTA陶瓷微波烧结的主要工艺过程[J].无机材料学报,2001(01):178-182.
[47]	Mamoru O .Sintering,consolidation,reaction and crystal growth by the spark plasmas system (SPS)[J].Materials Science and Engineering A,2000,287:183-188.
[48]	刘军芳,傅正义,王皓.放电等离子烧结氮化铝透明陶瓷的研究[J].硅酸盐学报,2003(03):320-323.
[49]	张厚兴,黄勇,李海峰,万之坚.放电等离子烧结超快速合成MgAlON尖晶石的研究[J].陶瓷学报,2005(01):13-16.
[50]	刘光华,陈克新,周和平,郭俊明,宁晓山.添加燃烧合成晶种SPS烧结Yb α-SiAlON陶瓷[J].无机材料学报,2005(03):659-665.
[51]	王连军,江莞,柏胜强,王刚,陈立东.SPS快速烧结制备纳米结构Ti5Si3-TiC复合材料[J].无机材料学报,2004(06):1436-1440.
[52]	汪苏,陈佳,李建明.复杂陶瓷件烧结过程温度场数值模拟及仿真[J].北京航空航天大学学报,2004(08):787-790.
[53]	赵保军,施法中,冯涛,孙建民,徐海然.选区激光烧结成型中致密度的数值模拟与实验[J].激光技术,2003(01):40-43.
[54]	景晓宁,倪勇,何陵辉,赵建华.陶瓷烧结过程孔隙演化的二维相场模拟[J].无机材料学报,2002(05):1078-1082.
[55]	张道礼,翁广安,龚树萍,周东祥.钛酸钡系PTCR半导体陶瓷烧结过程的计算机模拟工.烧结初期的动力学方程及计算机模拟[J].功能材料,2001(06):635-637,642.
[56]	Huang Y.;Xie ZP.;Guo H. .The fine micro-structure of interface layer for laminated Si3N4 ceramics[J].Journal of Materials Science Letters,1998(7):569-571.
[57]	Wang C A;Huang Y;Zan Q F et al.Control of composition and structure in laminated Si3N4/BN composites[J].Journal of the American Ceramic Society,2002,85(10):2452-2461.
[58]	Wang C A;Huang Y;Cai S Y et al.Biomimetic structure design-an approach to ahange the arittleness of aeramics in nature[J].Materials Science and Engineering C,2000,11:9-12.
[59]	Benjamin Hatton;Patrick S. Nicholson .Design and Fracture of Layered Al_2O_3/TZ3Y Composites Produced by Electrophoretic Deposition[J].Journal of the American Ceramic Society,2001(3):571-576.
[60]	昝青峰;汪长安;黄勇等.Zan QF,Al2O3/Ti3SiC2层状陶瓷材料中的残余应力分析[J].稀有金属材料与工程,2002,31(zk):137-140.
[61]	Wang C A;Huang Y;Xie Z P .Improved resistance to damage of SiC whisker-reinforced Si3N4 matrix composites by whisker-oriented alignment[J].Journal of the American Ceramic Society,2001,84(01):161-164.
[62]	Wang Chang-an;Huang Yong .The Effect of Whisker Orientation in SiC Whisker-reinforced Si3N4 Ceramic Matrix Composites[J].Journal of the European Ceramic Society,1999(10):1903-1910.
[63]	Barsoum MW.;Elraghy T. .SYNTHESIS AND CHARACTERIZATION OF A REMARKABLE CERAMIC - TI3SIC2[J].Journal of the American Ceramic Society,1996(7):1953-1956.
[64]	Barsoum M W .The MAX phases a new class of solids: thermodynamically stable nanolaminates[J].Proc Solid Chem,2000,28:201-281.
[65]	Wang C A;Zan Q F;Huang Y.Preparation, structure and properties of remarkable Ti3SiC2 ceramics[A].北京,1999:98-103.
[66]	Tang K;Wang C A;Huang Y et al.Growth model and morphology of Ti3SiC2 grain[J].Journal of Crystal Growth,2001,222(1-2):130-134.
[67]	Sun Z M;Zhang Y;Zhou Y C .Synthesis of Ti3SiC2 powders by a solid-liquid reaction process[J].Scripta Materialia,1999,41(01):61-66.
[68]	Jiaoqun Zhu;Bingchu Mei;Jun Liu;Xuewen Xu .Synthesis of high-purity Ti_3SiC_2 and Ti_3AlC_2 by hot-pressing (HP)[J].Journal of Materials Science Letters,2003(15):1111-1112.
[69]	Guo-Jun zhang;Jian-Feng Yang;Tatsuki Ohji .Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores[J].Journal of the American Ceramic Society,2001(6):1395-1397.
[70]	Jian-Feng Yang;Guo-Jun Zhang;Naoki Kondo .Synthesis of Porous Si_3N_4 Ceramics with Rod-Shaped Pore Structure[J].Journal of the American Ceramic Society,2005(4):1030-1032.
[71]	Droschel M;Hoffmann M J.SiC-ceramics with tailored porosity gradients for combustion chambers[A].Smolenice Castle, Slovakia,1999:11-15.
[72]	S. Ochiai;Y. Sakai;K. Sato .Fracture characteristics of Al_2O_3/YAG composite at room temperature to 2023 K[J].Journal of the European Ceramic Society,2005(8):1241-1249.
[73]	Yonosuke Murayama;Shuji Hanada;Jong Ho Lee .Texture Control and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite Rods[J].Materials transactions,2004(8):2697-2702.
[74]	程慷果,万菊林,粱开明.云母微晶玻璃的热压强化和韧化[J].硅酸盐学报,1998(03):403-406.
[75]	Li Y L;Qiao G J;Jin Z H .Machinable Al2O3/BN composite ceramics with strong mechanical properties l[J].Materials Research Bulletin,2002,37(08):1401-1409.
[76]	Wang R G;Pan W;Chen J et al.Microstructure and mechanical properties of machinable Al2O3/LaPO4 composites by hot pressing[J].Ceramics International,2003,29(01):83-89.
[77]	李永利,张久兴,乔冠军,金志浩.氧化物/BN可加工复相陶瓷的高温氧化行为及表面裂纹修复[J].硅酸盐学报,2004(12):1476-1480.
[78]	邱世鹏,刘家臣,刘志锋,葛志平,于爱兵,李鸿祥.CePO4/Ce-ZrO2可加工陶瓷加工机理的研究[J].硅酸盐学报,2003(04):341-345.
[79]	李永利,乔冠军,金志浩.可切削加工陶瓷材料研究进展[J].无机材料学报,2001(02):207-211.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

先进结构陶瓷研究进展评述

Review on Research Progress of Advanced Structural Ceramics

参考文献