为了满足用户对优质钢和纯净钢的要求,直接还原铁作为废钢的替代品用于电弧炉炼钢应是一种可行的选择.概述了直接还原铁的特点,指出高比例使用DRI可以得到N、Cu、Cr、Ni、As、Sn等含量低的钢,直接还原铁可认为是一种较好的电弧炉炼钢原料.
参考文献
[1] | 马廷温.电炉钢工艺技术与节能降耗[M].北京:石油工业出版社,1993:181. |
[2] | Wolfgang Pietsch. Storage,Shipping and Handing of Direct Reduced Iron[J].SME-AIME Fall MEETING,1976(09):1-2. |
[3] | Rigand M;Marquis A;Dancy T .Electric Arc Furnace Steelmaking with Prereduced Pellets[J].Ironmaking and Steelmaking,1976,3(06):366-371. |
[4] | H L Bishop;H.N.Lander;N.J.Grant et al.Equilibria of Sulfur and Oxygen between Liquid Iron and Open Hearth Type Slags[J].Metallurgical and Materials Transactions of AIME,1956,206(07):862-868. |
[5] | D A mling J Sittard;W.Resch .Use of Dolomitic Lime in the Electric Arc Furnace[J].Stahl und Eisen,1978,98(24):1281-1286. |
[6] | 邹文正.150t超高功率电弧炉配加直接还原铁冶炼工艺[J].特殊钢,1998(02):37-38. |
[7] | Ameling D;Rudolph G;Elsner E.New Results Obtained in the Operation of UHP Electric Arc Furnace Scrap and Spong Iron[J].Fachber Huttenprax Metallweitervcrarb,1976(10):839-852. |
[8] | Elsner E;Knapp H;Voss H .Now Results Obtained in the Operation of UHP Electric Arc Furnace Scrap and Spong Iron[J].Stahl und Eisen,1974,94(26):1322-1330. |
[9] | 牛士珍 .海绵铁在电炉炼钢中使用效果的分析[J].特殊钢,1997,4:38. |
[10] | Ottmber H;Oerter A;Schmeiduch G et al.The Use of Lignite Reduced Metallized Pellets in Electric Arc Furnace for Steelmaking at Roehrenwerke Bous[J].Stahl und Eisen,1976,96(03):106-112. |
[11] | Meyer K;Post G .Process Technology of Steedmaking from Sponge Iron in the Electric Arc Furnace[J].Stahl und Eisen,1973,93(05):194-204. |
[12] | Tucker H;Tartaron F;Goldstein H .Electric Arc Furnace Steelmaking with Spong Iron[J].Blast Furnace and Steel Plant,1968,56(12):1070-1084. |
[13] | Ronaldo S Sampaio.The Brazilian Experience in Utilizing Large Proportions of Cold Pig Iron in EAF[C].proceedings of the 5hy European Electric Steel Congress,1955 |
[14] | Robert L.Bullard;Steven R.Resler.The Use of DRI in the Electric Furnaces at Georgetown Steel Corporation[A].,1995 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%