以用机械合金化法制备的超细W-15Cu复合粉末为原料,采用热压烧结工艺制备了高密度的W-15Cu合金,用扫描电镜、硬度仪、密度测试仪等研究了烧结工艺对合金组织和性能的影响.结果表明:采用高能球磨可以制备出钨晶粒镶嵌铜相中的复合粉末;采用热压烧结,在30MPa、1 500 ℃×2 h的条件下,可以制备出相对密度99.8%、断裂强度1290.6 MPa、硬度44.8HRC的高密度钨铜合金.
参考文献
| [1] | 范景莲,刘军,严德剑,黄伯云.细晶钨铜复合材料制备工艺的研究[J].粉末冶金材料科学与工程,2003(01):63-67. |
| [2] | 陈文革,李建斌.钨铜材料与铜的摩擦焊连接研究[J].机械工程材料,2001(01):25-27. |
| [3] | 陈文革 .钨铜电触头材料的失效分析[J].机械工程材料,1998,22(05):45-48. |
| [4] | 林信平,曹顺华,李炯义,谢湛,蔡志勇.纳米晶W-25Cu复合粉末烧结行为的研究[J].中国钨业,2005(01):39-43. |
| [5] | Young Do Kim;Nang Lyeom Oh;Sung-Tag Oh .Thermal conductivity of W-Cu composites at various temperatures[J].Materials Letters,2001(5):420-424. |
| [6] | LI Binghu,KANG Zhanying,Chen Wenge,Ding Bingjun.Preparation of nanosized W/Cu composite powder by sol-gel technique[J].稀有金属（英文版）,2005(02):170-173. |
| [7] | Eui-Sik Yoon;Jai-Sung Lee;Sung-Tag Oh .Microstructure and sintering behavior of W-Cu nanocomposite powder produced by thermo-chemical process[J].International Journal of Refractory Metals & Hard Materials,2002(3):201-206. |
| [8] | Dae-Gun Kim;Kang Won Lee;Sung-Tag Oh .Preparation of W-Cu nanocomposite powder by hydrogen-reduction of ball-milled W and CuO powder mixture[J].Materials Letters,2004(7/8):1199-1203. |
| [9] | 程继贵,雷纯鹏,蒋阳,吴玉程,夏永红.纳米W-Cu粉末的均相沉淀法制备及其烧结性能[J].中国有色金属学报,2005(01):89-93. |
| [10] | 周张健,葛昌纯,李江涛.热压法制备W/Cu功能梯度材料[J].材料科学与工艺,2000(01):52-54. |
| [11] | S.S. Ryu;Y.D. Kim;I.H. Moon .Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):233-240. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%