The polyimide alignment layer containing trifluoro methyl moiety was synthesized. It is found that the imidization percentage reached 97.2% after one hour heating at 250 C and the thermal decomposition temperature was 420 C. The high pretilt angles from 6.7～7.8° were acquired by changing the rubbing strength. STN liquid crystal cells with 240° twist angle were fabricated by using this kind of polyimide alignment material. After a series of reliability experiment at certain temperature and humidity, high temperature, low temperature and thermal impact, the power consumption currents of the cells changed little. All the results show that this kind of material is a good alignment material and can be used for STN liquid crystal display.
参考文献
| [1] | Castellano J A. Mol Cryst Liq Cryst,1983,94:33 |
| [2] | Scheffer T J,Nehring J. Appl Phys Lett,1984,45(10): 1021 |
| [3] | SUN Rui-Peng (孙睿鹏), HUANG Xi-Min (黄锡珉).Yejing Tongxun (液晶通讯),1995,3(2)：82 |
| [4] | XU Shou-Yi (徐寿颐),ZHANG Wei (张伟)SHI Lin (石琳).Gongneng Cailiao (功能材料),1995,26(1):87 |
| [5] | Fukuro H, Kobayashi S. Mol Cryst Liq Cryst,1988,163:157 |
| [6] | XU Shou-Yi (徐寿颐),LI Zhi-Jun (李志军).Qinghua Daxue Xuebao (清华大学学报),1997,37(12):17 |
| [7] | Seo D S,Nishikawa M,Kobayashi S. Liq Cryst,1997,22(4): 515 |
| [8] | Kim S I,Ree M,Shin T J, et al. J Polym Sci,1999,37:2909 |
| [9] | Pryde C A. J Polym Sci,1989,27:711 |
| [10] | KimHT,ParkJ K. Polym J,1997,29:1002 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%