通过超高压力通电烧结制备了添加1%TiC和1%La2O3的W/Cu FGM,研究了其烧结、层间剪切强度及抗热冲击性能;此功能梯度材料气孔率在11%左右;在激光功率密度200 mW·m-2下,对此材料进行激光热冲击试验,冲击1000次,含1%La2O3钨-铜梯度材料表面没有损坏,而含1%TiC钨-铜梯度材料表面出现裂纹.并对此材料抗热冲击现象进行了简要分析.
参考文献
| [1] | Smid I;Akiba M;Vieider G et al.Development of tungsten armor and bonding to copper for plasma-interactive component[J].Journal of Nuclear Materials,1998,258-263:160. |
| [2] | David J W;Barabash V R;Makhankov A et al.Assessment of tungsten for use in the ITER plasma facing components[J].Journal of Nuclear Materials,1998,258-263:308. |
| [3] | Ioki K;Barabash V R;Cardella A et al.Design and material selection for ITER first wall/blanket,divertor and vacuum vessel[J].Journal of Nuclear Materials,1998,258-263:74. |
| [4] | Niino M;Hirai T;Watanabe R .Functionally gradient materials[J].J Jpn Comp-Mater,1987,13(06):257. |
| [5] | Takahashi M;Itoh Y;Miyazaki M et al.Fabrication tungsten/copper graded material[J].Int J of Refract Met Hard Mater,1994,12(05):243. |
| [6] | Itoh Y;Takahashi M;Takano H .Design of tungsten/copper graded composite for high heat flux components[J].Fusion Engineering and Design,1996,31(04):279. |
| [7] | Jedamzik R;Neubrand A;Rodel J.Functionally graded materials by electrochemical modification of porous performs[A].,1997:233. |
| [8] | Jedamzik R;Neubrand A;Rodel J .Characterization electrochemically processed graded tungsten/copper composites[J].Materials Sci Forum,1999,308-311:782. |
| [9] | Birth U;Joensson M;Kieback B .Powder metallurgical processing and properties of copper/tungsten gradients[J].Materials Sci Forum,1999,308-311:766. |
| [10] | 凌云汉,周张键,李江涛,杨大正,葛昌纯.超高压梯度烧结法制备W/Cu功能梯度材料[J].中国有色金属学报,2001(04):576-581. |
| [11] | 刘翔,谌继明,许增裕,邓颖,葛昌纯,李江涛.W/Cu梯度功能材料的高热负荷性能研究[J].核聚变与等离子体物理,2002(04):203-208. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%