电子束冷床熔炼参数对熔池表面温度的影响

稀有金属, 2006, 30(z1): 55-59. doi: 10.3969/j.issn.0258-7076.2006.z1.014

电子束冷床熔炼参数对熔池表面温度的影响

韩明臣 ^1, , 周义刚 ^2, , 赵铁夫 ^3, , 张英明 ^4, , 周廉 ^5, , ^6, , ^7,

1.西北有色金属研究院工程中心,陕西,西安,710016;西北工业大学材料学院,陕西,西安,710072

2.西北工业大学材料学院,陕西,西安,710072

3.西北有色金属研究院工程中心,陕西,西安,710016

4.西北有色金属研究院工程中心,陕西,西安,710016

5.西北有色金属研究院工程中心,陕西,西安,710016

6.ALD Vacuum Technologies AG,Hanau 63450,Germany

7.ALD Vacuum Technologies AG,Hanau 63450,Germany

关键词：电子束冷床熔炼 , 钛合金TC4 , 熔池表面温度 , 熔炼参数

Effect of Melting Parameters on Surface Temperature of Melt Pool of TC4 Alloy during Electron Beam Cold Hearth Melting

使用M9100图像高温仪精确测定了TC4合金电子束冷床熔炼时坩埚和冷床熔池表面的温度.结果表明,结果表明,熔炼工艺参数如熔化速度、熔炼功率、电子束扫描方式和扫描频率都会对熔池表面温度产生剧烈影响.

参考文献

[1]	Harker H R .Experience with large scale electron beam cold hearth melting (EBCHM)[J].Vacuum,1990,41(7-9):2154.
[2]	Blum M;Biebricher U;Reiter G.Recent developments in EB refining furnaces for the production of superclean Niobium and tantalum[A].,2002:2-1.
[3]	Poulsen E;Chinnis W;Mede M.Status of titanium cold hearth melting[A].Saint-Petersburg:Central Research Institute of Structural Materials (CRISM) "PROMETEY",1999:1541.
[4]	Fedorov V;Lashuk N;Schekin-Krotov V.Electron beam cold hearth melt of titanium and its alloys[A].Saint-Petersburg:Central Research Institute of Structural Materials (CRISM) "PROMETEY",1999:1406.
[5]	Paton B E;Trigub N P;Akhonin S V.Electron beam melting of titanium[A].Saint-Petersburg:Central Research Institute of Structural Materials (CRISM) "PROMETEY",1999:1372.
[6]	Entrekin C H;Harker H R.Casting of 16 MT titanium slabs in an electron beam furnace[A].San Diego,CA,USA,1994
[7]	Dax F R;Pang Yuan.Lowering the cost of titanium alloys for combat vehicles[A].Broomfield,Colorado:International Titanium Association,2000
[8]	J. R. Wood .Producing Ti-6Al-4V Plate from Single-Melt EBCHM Ingot[J].JOM,2002(2):56-58.
[9]	Ward M.Temperature sensing for cold-hearth melting process[A].Cambridge:The Institute of Materials,1995:1478.
[10]	Nakamura H;Mitchell A .The effect of beam oscillation rate on Al evaporation from a Ti-6Al-4V alloy in electron beam melting process[J].ISIJ International,1992,32(05):583.
[11]	Isawa T;Nakamura H;Murakami K .Aluminium evaporation from titanium alloys in EB hearth melting process[J].ISIJ International,1992,32(05):607.
[12]	Kusamichi T;Kanayama H;Matsuzaki H.Fundamental study on themaking of titanium alloy ingot by electron beam melting[A].Englewood:Bakish Materials Corporation,1989:137.
[13]	Blum M;Choudhury A;Hugo F.Results of electron beam remelting of superalloys and titanium alloys with a high-freqency EB-Gun[A].Englewood:Balish Materials Corporation,1996:245.
[14]	Mitchell A;Nakamura H;Tripp D W.The "hot-spot" problem in EB melting of alloys[A].Englewood:Bakish Materials Corporation,1987:23.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

电子束冷床熔炼参数对熔池表面温度的影响

Effect of Melting Parameters on Surface Temperature of Melt Pool of TC4 Alloy during Electron Beam Cold Hearth Melting

参考文献