将纳米CaCO3先分散在醋酸乙烯(VAc)中,再进行VAc溶液聚合,以原位聚合的方法制得纳米CaCO3/PVAc复合材料.主要研究了纳米CaCO3在VAc中的最佳分散条件和VAc溶液聚合的最佳条件参数,对不同纳米CaCO3含量的复合材料进行红外、透射电镜表征和断裂强度、断裂伸长率等性能的测试.结果显示:CaCO3与PVAc存在化学键的结合,CaCO3在PVAc中呈纳米级分散,当纳米CaCO3质量分数为0.2%~0.3%时,该复合材料力学性能最佳.
参考文献
[1] | 尹世清,仝新生,苍会生,陈尔凡.纳米CaCO3改性氟树脂涂料[J].涂料工业,2008(03):7-8,12. |
[2] | 王智宇,林旭添,陈海锋,樊先平,钱国栋.原位生成法制备纳米TiO2改性聚丙烯酸酯涂料[J].涂料工业,2006(08):28-31. |
[3] | Chaichana E;Jongsomjit B;Praserthdam P .Effect of nano-SiO2 particle size on the formation of LLDPE/SiO2 nanocomposite synthesized via the in situ polymerization with metallocene catalyst[J].Chemical Engineering Science,2007(26):899-905. |
[4] | M B SAEED;MAO-SHENG ZHAN .Adhesive strength of nanosize particles filled thermoplastic polyimides.part-Ⅰ:multiwalled carbon nano-tubes(MWNT)-polyimide composite films[J].International Journal of Adhesion and Adhesives,2007,27(04):306-318. |
[5] | 奚强,赵春芳,李蕾,李亮,赵雷,程时远.反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征[J].化学物理学报,2003(02):135-140. |
[6] | Wei Wu;Taobo He;Jian-feng Chen .Study on in situ preparation of nano calcium carbonate/PMMA composite particles[J].Materials Letters,2006(19):2410-2415. |
[7] | Y.H. Lai;M.C. Kuo;J.C. Huang;M. Chen .On the PEEK composites reinforced by surface-modified nano-silica[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):158-169. |
[8] | 沈新璋,金名惠.甲基丙烯酸对纳米SiO2微粒表面的原位聚合改性[J].应用化学,2003(10):1003-1005. |
[9] | J.Z. Liang .Evaluation of dispersion of nano-CaCO_3 particles in polypropylene matrix based on fractal method[J].Composites, Part A. Applied science and manufacturing,2007(6):1502-1506. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%