欢迎登录材料期刊网

材料期刊网

高级检索

采用离散元法动态模拟了功能陶瓷材料的压制过程,分别分析了重力与微重力情况下,成型后素坯的颗粒分布、应力以及孔隙率等情况.结果显示:在重力情况下,不同粒径的颗粒分布不均匀,小粒径颗粒很大一部分集中在上冲附近,而微重力情况下,颗粒不均匀性明显减小;与此同时,与微重力情况相比,重力情况下坯体的应力分布梯度较大,靠近上冲模及下冲模处应力比中间部位应力大,而孔隙率分布梯度也较大.

参考文献

[1] Haware Rahul V,Tho Ingunn,Bauer-Brandl A,et al.Application of multivariate methods to compression behavior evaluation of directly compressible materials.Journal of Pharmaceutics and Biopharmaceutics,2009,72(1):148-155.
[2] 孟正华,黄尚宇.压制方式对锆钛酸铅压电陶瓷密度及性能影响的研究.粉末冶金技术,2008,26(1):49-53.
[3] 赵然,周静,魏长松,等.成型工艺对xPMS-2(1-x)PZN陶瓷性能的影响.四川大学学报,2005,42(S1):410-414.
[4] 董林峰,李从心.金属粉末成形过程的裂纹预测.上海交通大学学报,2001,35(1):90-93.
[5] Park H,Kim K T.Consolidation behavior of SiC powder under cold compaction.Materials Science and Engineering,2001,299(1/2):116-124.
[6] Sonnergaard J M.Investigation of a new mathematical model for compression of pharmaceutical powders.European Journal of Pharmaceutical Sciences,2001,14(2):149-157.
[7] Wu C Y,Hancock B C,Mills A,et al.Numerical and experimental investigation of capping mechanisms during pharmaceutical tablet compaction.Powder Technology,2008,181(2):121-129.
[8] Henderson R J,Chandler H W,Akisanya A R,et al.Finite element modeling of cold isostatic pressing.Journal of European Ceramic Society,2000,20(8):1121-1128.
[9] Foo Y Y,Sheng Y,Briscoe B J,et al.An experimental and numerical study of the compaction of alumina agglomerates.International Journal of Solids and Structures,2004,41(21):5929-5943.
[10] Martin C L,Bouvard D,Shima S,et al.Study of particle rearrangement during powder compaction by the discrete element method.Journal of the Mechanics and Physics of Solids,2003,51(4):667-693.
[11] Frenning G(o)ran.An efficient finite/diserete element procedure for simulating compression of 3D particle assemblies.Computer Methods in Applied Mechanics and Engineering,2008,197(49/50):4266-4272.
[12] 孙其诚,王光谦.颗粒物质力学导论.北京:科学出版社,2009:3-6.
[13] 李标荣.电子陶瓷工艺原理.武昌:华中工学院出版社,1986:39-41.
[14] 陈诺夫.微重力环境材料科学实验.自然杂志,2007,29(6):335-337.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%