建立了铝合金焊接接头的S-N曲线,对比分析了搅拌摩擦和氩弧焊两种工艺对其焊接接头疲劳性能的影响,结果表明:在载荷相同的条件下,铝合金搅拌磨擦焊接接头的疲劳性能优于氩弧焊接头,搅拌摩擦焊接头的疲劳寿命N=106次的疲劳强度为59-65 MPa,搅拌摩擦焊接接头具有比氩弧焊接头更为细小的晶粒和狭窄的焊接热影响区,阻碍了滑移带的形成和裂纹的扩展,从而提高了接头的疲劳性能,铝合金焊接接头的缺陷是主要的疲劳裂纹源.
参考文献
| [1] | ZHANG Zhao,ZHANG Hongwu,Effect of process parameters on quality of friction stir welds,Chinese Journal of Materials Research,20,504(2006) (张昭,张洪武,焊接参数对搅拌摩擦焊接质量的影响,材料研究学报,20,504(2006)) |
| [2] | LI Jingyong,MA Jianmin,Effect of welding processes on fatigue properties of 6061.T6 aluminum welded joints,Journal of Aeronautical Materials,24,53(2004) (李敬勇,马建民,焊接工艺方法对6061-T6铝合金焊接接头疲劳性能的影响,航空材料学报,24,53(2004)) |
| [3] | WANG Kuaishe,WANG Xunhong,SHEN Yang,XU Kewei,Research on microstructure and mechanical properties of friction stir weld joints of dissimilar materials,Rare Materials and Engineering,34,155(2005) (王快社,王训宏,沈洋,徐可为,异种材料搅拌摩擦焊接接头组织特征与性能研究,稀有金属材料与工程,34,155(2005)) |
| [4] | K.Colligan,Material flow behavior during friction stir welding of aluminum,Welding Journal,78,229(1999) |
| [5] | K.V.Jata,S.L.Semiatin,Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys,Scripta Mater.,43,743(2000) |
| [6] | Michael A.Sutton,Anthony P.Reynolds,Bangcheng Yang,Mixed mode Ⅰ/Ⅱfracture of 2024-T3 friction stir welds,Engineering Fracture Mechanics,70,2215(2003) |
| [7] | WANG Wenxian,MA Lili,MU Wei,LI Jinyong,WANG Dongpo,HUO Lixing,DENG Caiyan,Fatigue behavior of AZ31B magnesium alloy joint with TIG-welding,Chinese Journal of Mechanical Engineering,43(10),161(2007)(王文先,马丽莉,慕伟,李晋永,王东坡,霍立兴,邓彩艳,AZ31B镁合金TIG焊焊接接头的疲劳性能,机械工程学报,43(10),161(2007)) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%