以紫外光固化巯基/乙烯基硅氮烷共聚体系制备了不同结构的聚合物陶瓷先驱体,高温裂解后得到氮化硅陶瓷,用X射线衍射仪,场发射扫描电镜和能谱仪等手段对巯基官能度、巯基化合物分子尺寸、巯基/乙烯基硅氮烷配比以及惰性填料进行了表征,研究了聚合物先驱体的结构对氮化硅陶瓷的结晶度和晶粒尺寸的影响,结果表明:巯基单体官能度和分子尺寸的增加导致先驱体陶瓷的结晶度提高以及平均晶粒尺寸降低;巯基单体相对含量的增加导致先驱体陶瓷的结晶度增加,乙烯基与巯基摩尔比为1:0.5时平均晶粒尺寸出现峰值;β-Si3N4粉体惰性填料的加入能明显抑制先驱体陶瓷的尺寸收缩.
参考文献
| [1] | ZHANG Junbao,LEI Tingquan,WEN Guangwu,ZHOU Yu,Research progress in synthesis of silicon oxynitrid,Materials Science & Technology,9(4),434(2001) (张俊宝,雷廷权,温广武,周玉,氮氧化硅合成研究进展,材料科学与工艺,9(4),434(2001)) |
| [2] | O.Delverdier,M.Monthioux,Thermal behavior of (organosilicon) polymer-derived ceramics V:Main facts and trends,J.of the Eur.Ceram.Soc.,16,721(1996) |
| [3] | K.Kakimoto,F.Wakai,J.Bill,A.Fritz,Fabrication of polycarbosilane-derived SiC bulk ceramics by carbothermic reduction:Effect of green density on crystallinity of pyrolyzed compacts,J.Am.Ceram.Soc.Sep.,82(9),23(1999) |
| [4] | G.Ziegler,H.J.Kleebe,G.Motz,H.Muller,S.Traszl,W.Weibelzahl,Synthesis,microstructure and properties of SiCN ceramics prepared from tailored polymers,Materials Chemistry and Physics,61(1),55(1999) |
| [5] | Linan An,Wenge Zhang,V.M.Bright,M.L.Dunn,R.Raj,The 13th IEEE Annual International Conference on Microelectromechanical Systems (MEMS-2000),Miyazaki,Japan,January,23-27,619(2000) |
| [6] | Sirish K.Reddy,Neil B.Cramer,Tsali Cross,Rishi Raj,Christopher N.Bowman,Polymer-derived ceramic materials from thiol-ene Photopolymerization,Chem.Mater.,15,4257(2003) |
| [7] | E.Andrzejewska,Photopolymerization kinetics of multifunctional monomers,progress in Polymer Science,26(4),605(2001) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%