采用矩形平面大弧源离子镀技术在201奥氏体不锈钢基体表面制备TiN硬质薄膜,研究了脉冲偏压对TiN膜层的表面形貌、相结构、硬度和耐磨性能的影响.结果表明,随着脉冲偏压的增大,薄膜中大颗粒的数目先增加后减少,这是大颗粒受到离子拖曳力和电场力双重作用的结果.存在一个最佳的脉冲偏压,使得制备出的TiN膜层具有较高的I(111)/I(200)比例和较高的耐磨性.脉冲偏压为-300 V时制备的TiN膜层具有最好的综合性能.
参考文献
| [1] | BAI Xiuqin,LI Jian,Study of low temperature deposition of magnetic sputtering TiN films and their tribological properties,Lubrication Engineering,5,15(2006)(白秀琴,李健,磁控溅射TiN薄膜低温沉积技术及其摩擦学性能研究,润滑与密封,5,15(2006)) |
| [2] | WANG Shidong,HUI Wenhua,QI Shan,XU Aiqun,Friction-wear behaviour of TiN ion-plated coating by hollow cathode deposition,Materials Science and Technology,1(3),24(1993)(王世栋,惠文华,祁珊,徐爱群,空心阴极TiN镀层的摩擦磨损行为,材料科学与工艺,1(3),24(1993)) |
| [3] | LI Jinlong,SUN Mingren,MA Xinxin,TANG Guangze,JIN Yinyu,Composition and structure of TiN film prepared by plasma-based ion implantation,Materials Science and Technology,15(1),40(2007)(李金龙,孙明仁,马欣新,唐光泽,金银玉,等离子体基离子注入制备TiN膜的成分结构,材料科学与工艺,15(1),40(2007)) |
| [4] | W.Olbrich,J.Fessmann,G.Kampschulte,J Ebberink,Improved control of TiN coating properties using cathodic arc evaporation with a pulsed bias,Surf.Coat.Tech.,49,258(1991) |
| [5] | J.Fessmann,W.Olbrich,G.Kampschulte,et al,Cathodic arc deposition of TiN and Zr(CN) at low substrate temperatures using a pulsed bias voltage,Mat.Sci.Eng.A,140,830(1991) |
| [6] | A.J.Perry,J.R.Treglio,A.F.Tian,Low temperature deposition of titanium nitride,Surf.Coat.Tech.,76-77,815(1995) |
| [7] | HUANG Meidong,DONG Chuang,GONG Jun,LU Chunyan,SUN Chao,HUANG Rongfang,WEN Lishi,Effect of bias on A1N thin films by cathodic arc ion plating,Chinese Journal of Material Research,15(6),675(2001)(黄美东,董闯,宫骏,卢春燕,孙超,黄荣芳,闻立时,偏压对阴极电弧离子镀AlN薄膜的影响,材料研究学报,15(6),675(2001)) |
| [8] | HUANG Meidong,DONG Chuang,SUN Chao,WEN Lishi,Mechanism of effect of bias on morphologies of films prepared by arc ion plating,Acta Metallrugica Sinica,39(5),510(2003)(黄美东,林国强,董闯,孙超,闻立时,偏压对电弧离子镀薄膜表面形貌的影响机理,金属学报,39(5),510(2003)) |
| [9] | GUO Huimei,LIN Gouqiang,SHENG Mingyu,WANG Dezhen,DONG Chuang,WEN Lishi,Analysis and calculation of force on macro-particles in plasma sheath,Acta Metallrugica Sinica,40(10),1064(2004)(郭慧梅,林国强,盛明裕,王德真,董闯,闻立时,大颗粒在等离子体鞘层中的受力分析与计算,金属学报,40(10),1064(2004)) |
| [10] | WANG Fuzhen,MA Wencun,Applications of Vapor Deposition Technology,1st Edition,Beijing,China Machine Press,143-153(2006)(王福贞,马文存,气相沉积应用技术,第一版,北京,机械工业出版社,143-153(2006)) |
| [11] | JIANG Ning,SHEN Yaogen,ZHANG Hanjie,BAO Shining,Influence of substrate bias on properties of TiN films with X-ray photoelectron spectroscopy and atomic force microscopy studies,Vacuum Science and Technology,24(6),459(2004)(江宁,沈耀根,张寒洁,鲍世宁,用XPS和AFM等方法研究氮化钛薄膜的物理化学特性,真空科学与技术学报,24(6),459(2004)) |
| [12] | LI Chengming,ZHANG Yong,CAO Erya,SEM analysis of the macro particles in TiN and (TiZrCr) N films deposited by multi-arc ion plating,Journal of Chinese Electron Microscopy Society,19(4),565(2000)(李成明,张勇,曹尔妍,多弧离子镀TiN和(TiZrCr)N膜中宏观颗粒的SEM分析,电子显微学报,19(4),565(2000)) |
| [13] | T.Matsue,T.Hanabnsa,Y.Ikeuchi,Dependence to processing conditions of structure in TiN films deposited by arc ion plating,Vacuum,74(3-4),647(2004) |
| [14] | V.N.Zhitomirsky,U.Kinrot,B.Alterkop,R.L.Boxman,S.Goldsmith,Influnce of gas pressure on the ion current and its distribution in a filtered vacuum arc deposition systerm,Surf.Coat.Tech.,86/87(1-3),263(1996) |
| [15] | G.Q.Yu,B.K.Tay,S.P.Lau,K.Prasad,L.K.Pan,J.W.Chai,D.Lai,Effects of N ion energy on titanium nitride films deposited by ion assisted filtered cathodic vacuum arc,Chem.Phys.Lett.,374(3),264(2003) |
| [16] | HUANG Meidong,SUN Chao,LIN Gouqiang,DONG Chuang,WEN Lishi,Mechanical property of low temperature deposited tin film by pulsed biased arc ion plating,Acta Metallrugica Sinica,39(5),516(2003)(黄美东,孙超,林国强,董闯,闻立时,脉冲偏压电弧离子低温沉积TiN硬质薄膜的力学性能,金属学报,39(5),516(2003)) |
| [17] | GONG Xiumin,YE Weiping,SUN Wei,XU Daqing,ZHU Xiaoqing,The effect of preferential orientation in TiN coatings on the quality of the coatings,Materials For Mechanical Engineering,24(1),20(2000)(宫秀敏,叶卫平,孙伟,许大庆,朱小清,TiN涂层中的择优取向及其对涂层性能的影响,机械工程材料,24(1),20(2000)) |
| [18] | C.A.Davis,A simple model for the formation of compressive stress in thin films by ion bombardment,Thin Solid Films,226(1),30(1993) |
| [19] | D.R.Mckenzie,Y.Yin,W.D.Mcfall,N.H.Hoang,The orientation dependence of elastic strain energy in cubic crystats and its application to preferred orientation in titanium nitrides thin films,J.Phys.:Condens.Matter,8(32),5883(1996) |
| [20] | U.C.Oh,J.H.Je,Effects of strain energy on the preferred orientation of TiN thin films,J.Appl.Phys.,74(3),1692(1993) |
| [21] | J.Pelleg,L.Z.Zevin,S.Lungo,Reactive sputter deposited TiN films on glass substrates,Thin Solid Films,197(12),117(1991) |
| [22] | ZHANG Ming and HE Jiawen,Calculation of elastic matrix and X-ray elastic constant of anisotropic films using Kroner method,The Chinese Journal of Nonferrous Metals,11(2),198(2001)(张铭,何家文,用Kroner模型计算取向薄膜的弹性矩阵与X射线弹性常数,中国有色金属学报,11(2),198(2001)) |
| [23] | S.Veprek,Plasma induced and plasma assisted chemical vapor deposition,Thin Solid Films,130(12),135(1985) |
| [24] | H.Ljungcrantz,M.Oden,L.Hultman,JE Greene,J-E Sundgren,Nanoindentation studies of single-crystal (001)-,(011)-,and (111)-oriented TiN layers on MgO,J.Appl.Phys.,80(12),6725(1996) |
| [25] | HUANG Jiamu,XU Chengjun,ZHANG Xingyuan,WANG Yaping,Morphology and physical properties of titanium nitride films deposited by magnetron sputtering at room temperature,Vacuum Science and Technology,25(4),297(2005)(黄佳木,徐成俊,张兴元,王亚平,室温直流磁控溅射氮化钛薄膜研究,真空科学与技术学报,25(4),297(2005)) |
| [26] | A.J.Perry,Adhesion studies of Ion-Plated TiN on steel.Thin Solid Films,81(4),357(1981) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%