采用温楔横轧方法制备出表层具有超微细复相组织的高碳珠光体钢棒件,研究了珠光体组织在温变形过程中的演变.结果表明,珠光体组织中的渗碳体片层主要以弯曲扭折的形式协调塑性变形,表现出较强的塑性变形能力;剧烈塑性变形促进了渗碳体片层的球化,表层球化完全的渗碳体颗粒粒径均小于0.2μm;温楔横轧后铁素体基体发生了动态连续再结晶,等轴铁素体平均晶粒尺寸为0.3～0.4 μm,0.5R处和心部的渗碳体球化不完全,铁素体再结晶也不完全;铁素体晶粒的超细化和渗碳体片层的球化明显改善高碳珠光体钢棒件的塑性,温变形过程中应变、应变速率及温度分布的不均匀是引起组织性能差异的根本原因.
参考文献
| [1] | WENG Yuqing,Ultra-Fine Grained Steels-Refining Theory and Controlling Technology for Microstructures in Steels (Beijing,Matellurgical Industry Press,2003) p.4,9(翁宇庆,超细晶钢-钢的组织细化理论与控制技术(北京,冶金工业出版社,2003)p.4,9) |
| [2] | YANG Wangyue,HU Anmin,QI Junjie,SUN Zuqing,Microstructure refinement of deformation-enhanced transformation in low carbon steel,Chinese Journal of Materials Research,15(2),171(2001)(杨王玥,胡安民,齐俊杰,孙祖庆,低碳钢形变强化相变的组织细化,材料研究学报,15(2),171(2001)) |
| [3] | CHEN Yunbo,ZHANG Fucheng,CHU Zuoming,ZHANG Jiming,CAO Guohua,WU Yuping,Advanced ultrafine technology of microstructure of iron and steel,Engineering Science,5(1),74(2003)(陈蕴博,张福成,褚作明,张继明,曹国华,吴玉萍,钢铁材料组织超细化处理工艺研究进展,中国工程科学,5(1),74(2003)) |
| [4] | T.Furuhara,T.Mizoguchi,T.Maki,Ultra-fine (α + 0) duplex structure formed by cold rolling and annealing of pearlite,ISIJ Int.,45(3),392(2005) |
| [5] | W.T.Fu,T.Furuhara,T.Maki,Effect of alloying elements on tensile properties of cold-rolled and annealed pearlite in eutectoid steels,CAMP-ISIJ,14,602(2001) |
| [6] | DU Zhongze,HUANG Junxia,FU Hanguang,WANG Jingtao,ZHAO Xicheng,Microstructure and mechanical property of 65Mn steel after severe plastic deformation,Journal of Jilin University (Engineering and Technology Edition),36(2),143(2006)(杜忠泽,黄俊霞,符寒光,王经涛,赵西成,65Mn钢大塑性变形后的组织与力学性能,吉林大学学报(工学版),36(2),143(2006)) |
| [7] | T.Maki,T.Furuhara,Microstructure and mechanical property of ultra-fine (ferrite+cementite) duplex structure in high carbon steel,Mater.Sci.Forum,426～432(1),19(2003) |
| [8] | HU Zhenghuan,ZHANG Kangsheng,WANG Baoyu,ZHANG Wei,Cross-Wedge Rolling Theory and Application (Beijing,Metallurgical Industry Press,1996)p.4,9,148(胡正寰,张康生,王宝雨,张巍,楔横轧理论与应用(北京,冶金工业出版社,1996)p.4,9,148) |
| [9] | WANG Minting,DU Fengshan,LI Xuetong,ZHENG Yangzeng,Predication on austenite microstructure evolution during hot deformation of cross wedge rolled shaft,Acta Metallurgica Sinica,41(2),118(2005)(王敏婷,杜凤山,李学通,郑炀曾,楔横轧轴类件热变形时奥氏体微观组织演变的预测,金属学报,41(2),118(2005)) |
| [10] | SHU Xuedao,HU Zhenghuan,Influence of technological parameters on inner stress of extra-large rolling piece during cross wedge rolling,Iron and Steel,38(12),34(2003)(束学道,胡正寰,工艺参数对楔横轧特大型轧件内部应力影响分析,钢铁,38(12),34(2003)) |
| [11] | Z.Pater,Tools optimisation in cross wedge rolling,J.Mater.Process Technol.,139,153(2003) |
| [12] | Q.Li,R.L.Michael,Predicting critical friction in a two-roll cross wedge rolling process,J.Tribology,125,200(2003) |
| [13] | Y.M.Dong,K.A.Tagavi,M.R.Lovell,Analysis of interfacial slip in cross wedge rolling:a numerical and phenomena logical investigation,J.Mater.Process Technol.,97,44(2000) |
| [14] | LIU Guihua,REN Guangsheng,XU Chunguo,JIANG Zhi,SHEN Zhi,Research on mechanism of interiorhollow defect during the deformation of cross wedge rolling,Chinese Journal of Mechanical Engineering,40(2),150(2004)(刘桂华,任广升,徐春国,蒋智,沈智,楔横轧变形过程中内部空心缺陷产生机理的模拟研究,机械工程学报,40(2),150(2004)) |
| [15] | Q.Li,R.L.Michael.,W.Slaughter,K.Tagivi,Investigation of the morphology of internal defects in cross wedge rolling,J.Mater.Process Technol.,125～126,248(2002) |
| [16] | Z.Pater,Numerical simulation of the cross wedge rolling process including upsetting,J.Mater.Process Technol.,92～93,468(1999) |
| [17] | G.Fang,L.P.Lei,P.Zeng,Three-dimensional rigid-plastic finite element simulation for the two-roll cross-wedge rolling process,J.Mater.Process Technol.,129,245(2002) |
| [18] | DU Fengshan,LI Xuetong,WANG Minting,3D coupled thermo-mechanical nonlinear FEM simulation of cross wedge rolling,Chinese Journal of Mechanical Engineering,38(12),231(2002)(杜凤山,李学通,王敏婷,楔横轧三维热力耦合非线性有限元模拟,机械工程学报,38(12),231(2002)) |
| [19] | M.T.Wang,X.T.Li,F.S.Du,Hot deformation of austenite and prediction of microstructure evolution of cross-wedge rolling,Mater.Sci.Eng.,A379,133(2004) |
| [20] | M.L.N.da Silva,W.Regone,S.T.Button,Microstructure and mechanical properties of microalloyed steel forgings manufactured from cross-wedge-rolled performs,Scripta Mater.,54,213(2006) |
| [21] | YU Hong,TIAN Sugui,GENG Xin,Feature and role of cold deformation of cementite,Journal of Iron and Steel Research,14(3),60(2002)(于宏,田素贵,耿新,钢中渗碳体的冷变形特征及其作用,钢铁研究学报,14(3),60(2002)) |
| [22] | HUANG Junxia,WANG Jingtao,ZHANG Zheng,Equal channel angular processing in a pearlitic structured steel,Chinese Journal of Materials Research,19(2),200(2005)(黄俊霞,王经涛,张郑,珠光体组织的等径弯曲通道变形,材料研究学报,19(2),200(2005)) |
| [23] | N.Tsuji,Ultrafine grained steels,Tetsu-to-Hagané,88(7),359(2002) |
| [24] | LIN Yijian,LUO Guangmin,SHI Haisheng,ZHANG Jingguo,A ultrahigh-carbon steel with optimized microstructure and excellent mechanical properties,Iron and Steel,40(11),60(2005)(林一坚,罗光敏,史海生,章靖国,一种具有优化组织和优异性能的超高碳钢,钢铁,40(11),60(2005)) |
| [25] | Y.Xiong,S.H.Sun,Y.Li,J.Zhao,Z.Q.Lv,D.L.Zhao,Y.Z.Zheng,W.T.Fu,Effect of warm cross wedge rolling on microstructure and mechanical property of high carbon steel rods,Materials Science and Engineering A,431,152(2006) |
| [26] | G.Glover,C.M.Sellars,Recovery and recrystallization during high temperature deformation of α-iron,Metall.Trans.,4(3),765(1973) |
| [27] | G.L.Kelly,H.Beladi,P.Hodgson,Ultrafine grained ferrite formed by interrupted hot torsion of plain carbon steel,ISIJ International,42(12),1585(2002) |
| [28] | A.Ohmori,S.Torizuka,K.Nagai,K.Yamada,Y.Kogo,Evolution of ultrafine-grained structure through large strainhigh Z deformation in a low carbon steel,Tetsu-toHagané,88(12),857(2002) |
| [29] | M.Niikura,M.Fujioka,Y.Adachi,A.Matsukura,T.Yokota,Y.Shirota,Y.Haqiwara,New concepts for ultra refinement of grain size in super metal project,J.Mater.Process Technol.,117(3),341(2001) |
| [30] | LI Longfei,YANG Wangyue,SUN Zuqing,Dynamic recrystallization of ferrite during deformation at temperatures below Ac1 a low carbon steel,Acta Metallurgica Sinica,39(4),419(2003)(李龙飞,杨王玥,孙祖庆,低碳钢在Ac1点以下温度变形时的铁素体动态再结晶,金属学报,39(4),419(2003)) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%