进行了不同循环应力下CFRP筋的常温疲劳试验,选取CFRP筋70%的极限拉伸应力作为最大循环应力,在R=0.5(最小循环应力与最大循环应力的比)和R=0的应力率下,测量了CFRP筋的疲劳寿命曲线,研究了CFRP筋的疲劳性能.结果表明:CFRP筋的最大循环应力应控制在70%极限拉伸应力以下;在R=0.5应力率下,最大循环应力下降5%的极限拉伸应力时,CFRP筋的疲劳寿命增长10倍左右;最大循环应力分别为60%和50%极限拉伸应力时,R=0应力率下CFRP筋的疲劳寿命分别为R=0.5应力率下疲劳寿命的百分之一和十分之一.这说明CFRP筋具有很大的脆性,需要有足够的强度安全系数,才能发挥作用;根据试验拟合的疲劳寿命曲线,CFRP筋的疲劳性能远高于Q235光圆钢筋.
参考文献
| [1] | CHEN Zhaoyuan,The Safety and Durability of Civil Engineering (Beijing,China Architecture & Building Press,2003) p.3(陈肇元,土建结构工程的安全性与耐久性(北京,中国建筑工业出版社,2003)p.3) |
| [2] | PENG Yaping,LIU Zengxi,XU Xinsheng,CHU Fengrong,Hi-Tech.Fiber & Application,27(5),21(2002)(彭亚萍,刘增夕,徐新生,初凤荣,高科技纤维与应用,27(5),21(2002)) |
| [3] | M.R.Adimi,A.H.Rahman,B.M.Benmokrane,Journal of Composites for Construction,4(4),206(2000) |
| [4] | V.K.Sanjeev,V.S.GangaRao.Hota,Journal of Structural Engineering,124(1),11(1998) |
| [5] | A.Plumtree,L.Shi,International Journal of Fatigue,24,155(2002) |
| [6] | W.X.Yao,N.Himmel,Composites Science and Technology,60,59(2000) |
| [7] | Tomita Yoshiyuki,Morioka Kojiro,Iwasa Masayuki,Materials Science and Technology part A,319～321,679(2001) |
| [8] | LI Jing,CHEN Shujian,GUO Bijian,Fracture Mechanics and Composite Material Mechanics (Wuhan,Huazhong University of Technology Press,1989) p.60(李灏,陈树坚,郭碧坚,断裂力学与复合材料力学(武汉,华中理工大学出版社,1989)p.60) |
| [9] | C.E.Bakis,L.C.Bank,V.L.Brown,E.Cosenza,J.F.Davalos,J.J.Lesko,A.Machida,S.H.Rizkalla,T.C.Triantafillou,Journal of Composites for Construction,6(2),73(2002) |
| [10] | M.H.A.Allah,E.M.Abdin,A.I.Selmy,U.A.Khashaba,Composites part A,28A,87(1997) |
| [11] | C.E.Demers,Construction and Building Materials,12(1),51(1998) |
| [12] | C.E.Demers,Construction and Building Materials,12(1),311(1998) |
| [13] | J.Petermann,A.Plumtree,Composites part A,32,107(2001) |
| [14] | LUO Zudao,WANG Zhenji,Advances in Composite Material Mechanics (Beijing,Peking University Press,1992)p.59(罗祖道,王震鸡,复合材料力学进展(北京,北京大学出版社,1992)p.59) |
| [15] | ZENG Zhibin,LI Zhirong,China Civil Engineering Journal,32(5),12(1999)(曾志斌,李之榕,土木工程学报,32(5),12(1999)) |
| [16] | H.Saadatmanesh,F.E.Tannous,ACI Materials Journal,96(2),143(1999) |
| [17] | E.J.Barbero,T.Damiani,Journal of Composites for Construction,7(1),3(2003) |
| [18] | L.N.Phillips,Design Foundation and Application of Composite Material (Beijing,Aviation Industry Press,1992)p.35(L.N.Phillips,复合材料的设计基础与应用(北京,航空工业出版社,1992)p.35) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%