针对热固性树脂基复合材料成型工艺的固化过程建立了数学模型,并采用有限单元法进行了三维瞬态数值分析.编制了有限元模拟程序CURESIM,通过具体数值模拟算例,表明本文中所建立的分析模型及算法具有较高的可靠性.模拟的固化过程并不特指某一成型工艺,因而模拟的数值方法具有一定的普遍性.模拟程序可以计算得到任意时刻复合材料内温度及固化度分布,通过数值模拟可以有效地优化固化加热工艺参数,提高产品质量.
参考文献
| [1] | 陈祥宝,包建文,娄葵阳.树脂基复合材料制造技术[M]. 北京:化学工业出版社,2000.1-5. |
| [2] | Russell J D, Madhukar M S, Genidy M S, et al. A new method to reduce cure-induced stresses in thermoset polymer composites Ⅲ: Correlating stress history to viscosity, degree of cure, and cure shrinkage [J]. Journal of Composite Materials, 2000,34 (22) :1926-1947. |
| [3] | Loos A C, Springer G S. Curing of epoxy matrix composites [J]. Journal of Composite Materials,1983,17 (2):135-169. |
| [4] | Bogetti T A ,Gillespie Jr J W. Two-dimensional cure simulation of thick thermosetting composites [J].Journal of Composite Materials, 1991,25 (3) :239-273. |
| [5] | Sung Yi, Hilton H H, Ahmad M F. A finite element approach for cure simulation of thermosetting matrix composites[J]. Computers & Structures,1997,64 (14):383-388. |
| [6] | Park H C, Lee S W. Cure simulation of thick composites structures using the finite element method [J]. Journal of Composite Materials,2001,35 (3):188-201. |
| [7] | Qi Z, Geubelle P H, Li M, Tucker C L. Dimensional accuracy of thermoset composites: Simulation of process-induced residual stresses [J]. Journal of Composites Materials, 2001, 35 (24):2171-2205. |
| [8] | 王瑁成, 邵敏. 有限单元法基本原理和数值方法[M].北京:清华大学出版社,2000.421-436. |
| [9] | Kim Y K, White S R. Viscoelastic analysis of processing-induced residual stresses in thick composite laminates [J]. Mech Compos Mater Struct,1997, 4: 361-387. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%