以带有玻璃涂层的氧化铝微粉、小尺寸板晶(样板晶)和Y-TZP微粉为原料,在常压、不同温度下,通过样板晶生长制备了Y-TZP/板状氧化铝复相陶瓷.对该复相陶瓷的室温力学性能的研究表明,在适当烧结温度下制备的复相陶瓷该材料具有较高的强度(800～900 MPa)和断裂韧性(11.8～15.2 MPa*m1/2).用扫描电子显微镜观察复相陶瓷的显微结构特点,表明该材料的增韧机制为氧化锆相变增韧和板晶对裂纹偏转和桥连机制共同起作用.用二参数Weibull分布来量化强度波动,表明该复相陶瓷具有很高的Weibull模量.
参考文献
| [1] | Hannink R H J. Significance of microstructure in transformation toughening zirconia ceramics [J]. Materials Forum, 1988 (11): 43-60. |
| [2] | 叶建东, 李红彦, 吴建青, 等. 原位Al2O3片晶/Ce-TZP和SrO*6Al2O3棒晶/Ce-TZP复合材料的制备与显微结构 [J]. 复合材料学报, 2002, 19(1): 54-58. |
| [3] | Horn J A, Zhang S C, Selvaraj U, et al. Templated grain growth of textured bismuth titanate [J]. J Am Ceram Soc, 1999, 82(4): 921-926. |
| [4] | Seabaugh M M, Kerscht I H, Messing G L. Texture development by templated grain growth in liquid-phase sintered alpha-alumina [J]. J Am Ceram Soc, 1997, 80(6): 1181-1188. |
| [5] | Hong S H, Messing G L. Development of textured mullite by templated grain growth [J]. J Am Ceram Soc, 1999, 82(4): 867-872. |
| [6] | Hitoa K, Nagaoka T, Brito M E, et al. Microstructure control of silicon nitride by seeding with rod-like β-Si3N4 particles [J]. J Am Ceram Soc, 1994, 77(7): 1857-1862. |
| [7] | Chesters J H. Refractories production and properties [M]. London: The Iron and Steel Institute, 1973. 183. |
| [8] | Readey M J, MeCALLEN C L, McNAMARA P D, et al. Correlations between flaw tolerance and reliability in zirconia [J]. J Mater Sci,1993, 28(12): 6748-6752. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%