针对离心渗铸板材工艺中金属铝熔液在旋转的Al2O3预型体内的充型过程,考虑离心惯性力对金属铝熔液的瞬态固化与再熔过程的影响,研究了伴随有瞬态固化和再熔现象的流场温度分布以及熔融区长度和固化率瞬态变化规律,推导了渗透界面和再熔界面移动速度计算公式,建立了界面速度与温度的耦合关系.结果表明:当Al2O3颗粒预热温度低于铝熔化温度时,渗透过程出现了瞬态固化和再熔现象,液固共熔区随渗透过程不断向前推进,共熔区长度和固化率随渗透过程而增长.随着孔隙率和转速的减小,共熔区内固化率提高,渗透前沿和再熔前沿界面移动速度减小.但孔隙率的减小使两种界面移动速度差值增大,液固共熔区长度增长;而转速的减小使两种界面移动速度差值缩小,液固共熔区长度缩短.
参考文献
| [1] | Mortensen A, Masur L J. Infiltration of fibrous performs by a pure metal I:Theory[J].Metallurgical transactions A,1989, 20A: 2535-2547. |
| [2] | Mortensen A, Michaud V. Infiltration of fiber performs by a binary alloy I:Theory[J].Metallurgical transactions A,1990, 21A: 2059-2071. |
| [3] | 胡锐,李华伦,魏明,等.挤压铸造硼酸铝晶须增强Al基复合材料浸渗过程理论分析[J].复合材料学报,2002,19(5):62-65. |
| [4] | Tong X, Khan J A. Infiltration and solidification/remelting of a pure metal in a two-dimensional porous preform[J].Journal of Heat Transfer, 1996, 118: 173-180. |
| [5] | Khan J A, Tong X. Unidirectional infiltration and solidification/remelting of Al-Cu alloy[J].Journal of Thermophysics and Heat Transfer, 1998, 12(1): 100-106. |
| [6] | Lu J W, Chen F. , Rotation effect on the convection of binary alloys unidirectionally solidified from below[J]Int J Heat Transfer, 1997, 40(2): 237-246. |
| [7] | Ogurtsov A P, Milen'kij I A, Samokhvalov S E, et al. Numerical method for calculating the filling of a mold and heat transfer of a melt under the action of centrifugal forces [J].Inzhenerno-Fizicheskii Zhurnal, 1995, 68(4) :678-686. |
| [8] | 王玉玮,刘进平,施廷藻,等.铁基SiC陶瓷颗粒表面耐磨复合材料的研制[J].铸造,1990,49(11):15-20. |
| [9] | Taha M A, EI-Mahallawy N A. Metal-matrix composites fabricated by pressure-assisted infiltration of loose ceramic powder[J]. Journal of Materials Processing Technology, 1998,73: 139-146. |
| [10] | Nishida Y, Shirayanagi I, Sakai Y. Infiltration of fibrous preforms by molten aluminum in a centrifugal force field[J].Metallurgical and Materials Transaction A, 1996, 27A: 4163-4169. |
| [11] | Nishida Y, Ohira G. Modelling of infiltration of molten metal in fibrous preform by centrifugal force[J].Acta Mater,1999, 47(3): 841-852. |
| [12] | 胡国新,田芩蔚,王国祥.高温金属熔液在旋转多孔介质内的渗流传热过程[J].化工学报,2002,53(7):708-714. |
| [13] | 胡国新,田芩蔚,王国祥.离心渗铸工艺中铝熔体在SiC多孔介质内的渗流传热过程[J].复合材料学报,2002,19(6):25-30. |
| [14] | Mortensen A, Comic J A. On the infiltration of metal matrix composites[J].Metallurgical Transactions A, 1987, 18A:1160-1163. |
| [15] | Brennan J J, Pask J A. Effect of nature of surfaces on wetting of sapphire by liquid aluminum[J].J Am Ceram Soc, 1968,51: 569-573. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%