芳纶纤维表面性质是影响其复合材料界面粘接性能的重要因素.本文作者采用超声技术对芳纶纤维表面进行改性处理,研究了超声作用下,芳纶纤维表面化学组成和表面结构的变化.结果表明:超声处理后,纤维表面极性官能团含量增加,比表面积加大,从而改善了芳纶纤维和环氧树脂之间的浸润性.
参考文献
| [1] | Perepelkin K E, Machalaba N N. Armos-the russian high-performance fiber: Comparison with other P-aramid fiber types [J]. Chemical Fibers International,, 1999, 49(3):211-214. |
| [2] | Menon N, Blum D Frank, Dharani L R. Use of titanate coupling agent in kevlar-phenolic composites [J]. Journal of Applied Polymer Science, 1994, 54(1): 113-123. |
| [3] | Tarantili P A, Andreopoules A G. Mechanical properties of epoxies reinforced with Chloride-treated aramid fibers [J]. Journal of Applied Polymer Science, 1997, 65(2): 267-275. |
| [4] | Benrashid Ramazan, Tesoro C Giuliana. Effect of surface-limited reaction on the properties of kevlar fibers [J]. Textile Research Journal, 1990, 60(6):334-344. |
| [5] | Chou C T, Penn L S. Chemical bonding and physical interaction by attached chains at the fiber-matrix interface [J]. Journal of Adhesion, 1991, 36(2):125-137. |
| [6] | Sheu G S, Shyu S S. Surface modification of kevlar 149 fibers by gas plasma treatment. Part Ⅰ: morphology and surface characterization [J]. Journal of Adhesion Science and Technology, 1994, 8(5): 531-542. |
| [7] | David A Biro, Gerald Pleizier, Yves Deslandes. Application of the microbond technique Ⅳ. Improved fiber-matrix adhesion by RF plasma treatment of organic fiber [J]. Journal of Applied Polymer Science, 1993, 47(5): 883-894. |
| [8] | Masaru Mori, Yoshikimi Uyama, Yoshito Ikada. Surface modification of aramid fibre by graft polymerization [J]. Polymer, 1994, 35(24): 5336-5341. |
| [9] | Shaker M, Kamel I, Ko F, Song J W. Improvement of the interfacial adhesion between kevlar fiber and resin by using R-F plasma [J]. Journal of Composites Technology & Research, 1996, 18(4): 249-255. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%