电子束固化复合材料界面粘结性能较低是急待解决的问题.利用阳极氧化技术和偶联剂涂层对碳纤维表面进行处理.处理前后的碳纤维表面性能利用SEM、XPS和接触角测试方法进行分析,通过层间剪切强度表征电子束固化复合材料界面粘结性能,并且与热固化复合材料进行对比.结果表明: 当碳纤维在酸性电解液中进行阳极氧化时,有利于提高电子束固化复合材料界面粘合性能,在碱性电解液中进行阳极氧化时, 则导致较低界面粘接性能.阳极氧化与偶联剂双重增效作用能够提高电子束固化复合材料界面粘合性能.
参考文献
| [1] | 张和善. 低成本先进复合材料技术的发展研究 [J]. 航空信息研究报告1998, 477: 7-9. |
| [2] | Drzal L T, Rich M J, Drown E K. Possible Mechanisms Responsible for Low Levels of Adhesion between Carbon Fibers and Epoxy Matrices in E-Beam Processed Composites [A]. In: 44th International SAMPE Symposium [C]. California: Society for the Advancement of Material and Process Engineering, 1999. 633-646. |
| [3] | Janke C J, Yarborough K D, Drzal L T. Fiber-Matrix Interface Studies on Electron Beam Cured Composites [A]. In:44th International SAMPE Symposium [C]. California: Society for the Advancement of Material and Process Engineering, 1999. 647-659. |
| [4] | Singh A, Saunders C B. Barnard J W, et al. Electron processing of fiber-reinforced advanced composites [J]. Radiat Phys Chem, 1996, 48(2): 153-179. |
| [5] | 陈明, 洪啸吟. 紫外光固化涂料的进展 [J]. 涂料工业, 1999,12:30-36. |
| [6] | 曹海林,黄玉东,张志谦,等. 碳纤维阳极氧化法处理对复合材料界面性能的影响 [J]. 材料工程,2000,4:16-18. |
| [7] | Davidson R S. Mechanism of Electron-Beam Curing [A]. In:Fouassier J P, Rabek J F, eds. Radiat. Curing in Polym. Sci. Technol [M]. London:Elsevier Applied Science, 1993. 301-339. |
| [8] | Crivello J V, Mowers W A. Electroinitiated cationic polymerization in the presence of diaryliodonium [J]. Macromol Chem Phys, 1998,199:725-733. |
| [9] | Crivello J V, Walton T C, Malik R. Fabrication of epoxy matrix composites by electron beam induced cationic polymerization [J]. Chem Mater, 1997, 9:1273-1284. |
| [10] | Yue Z R, Jiang W, Wang L, et al. Surface characterization of electrochemically oxidized carbon fiber [J]. Carbon, 1999,37: 1785-1796. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%