对BT18Y(Ti-6.9Al-3.6Zl-2.7Sn-0.7Mo-0.6Nb-0.21Si)钛合金进行了一系列的固溶处理,利用OM,SEM和TEM观察了在α+β两相区固溶后的显微组织形貌,发现连续的晶界α相发生了球化,一部分晶内初生α片端部具有"叉形"结构.分析了球化的原因和"叉形"结构的形成机理:晶界α相表面曲率不同造成的溶质浓度差异而引起的扩散是晶界相球化的根本原因,不同晶界α片的交接对球化有一定的贡献;晶内初生α片的各个部位与β相之间的相界面结构和界面能的不同是造成α+β相区固溶时α片端"叉形"形貌的主要原因,α片端面与β相之间为高界面能易移动的非共格界面,在固溶时β相容易在该处向α片内生长形成β片,与之对应的α片便出现了"叉形"结构.
参考文献
| [1] | Lee D H, Nam S W. Scr Mater, 1999; 40:265 |
| [2] | Bolisowa E A. Translated by Chen S Q. Metallography of Titanium Alloys. Beijing: Defense Industrial Press, 1980:246, 214, 227, 199(鲍利索娃E.A.编著,陈石卿译.钛合金金相学.北京:国防工业出版社,1986:246,214,227,199) |
| [3] | Wang Q Y, Ge Z M, Zhou Y B. Aerial Titanium Alloy.Shanghai: Shanghai Science and Technology Press, 1985:209, 211, 302(王全友,葛志明,周彦邦.航空用钛合金.上海:上海科学技术出版社,1985:210,190,302) |
| [4] | Filip R, Kubiak K, Ziaja W, Sieniawski J. Mater Proc Technol, 2003; 133:84 |
| [5] | Peng C Q, Huang B Y, He Y H. Chin Nonferrous Met,2001; 11:527(彭超群,黄伯云,贺跃辉.中国有色金属学报,2001;11:527) |
| [6] | Tiley J, Searles T, Lee E, Kar S, Banerjee R, Russ J C,Fraser H L. Mater Sci Eng, 2004; A372:191 |
| [7] | Lee D H, Nam S W, Choe S J. Mater Sci Eng, 2000; A291:60 |
| [8] | Semiatin S L, Seetharaman V, Ghosh A K, Shell E B,Simon M P, Fagin P N. Mater Sci Eng, 1998; A256:92 |
| [9] | Seshacharyulu T, Medeiros S C, Morgan J T, Malas J C,Frazier W G, Prasad Y V R K. Mater Sci Eng, 2000;A279:289 |
| [10] | Seshacharyulu T, Medeiros S C, Frazier W G, Prasad Y V R K. Mater Sci Eng, 2002; A325:112 |
| [11] | Sauer C, Liitjering G.Mater Sci Eng, 2001; A319-321:393 |
| [12] | Liitjering G. Mater Sci Eng, 1999; A263:117 |
| [13] | Zhang X D, Bonniwell P, Fraser H L, Baeslack W A, Evans D J, Ginter T, Bayha T, Cornell B. Mater Sci Eng, 2003;A343:210 |
| [14] | Koike J, Maruyama K. Mater Sci Eng, 1999; A263:155 |
| [15] | Furuhara T, Ogawa T, Maki T. Philos Mag Lett, 1995; 72(3): 175 |
| [16] | Bhattacharyya D, Viswanathan G B, Robb D, Furrer D,Hamish L F. Acta Mater, 2003; 51:4679 |
| [17] | Huang A J, Xu F, Li G P, Li D. Acta Metall Sin, 2002;38(Suppl.): S217(黄爱军,徐锋,李阁平,李东.金属学报,2002;38(增刊):S217) |
| [18] | Furuhara T, Takagi S, Watanabe H, Maki T. Metall Trans,1996; 27A: 1635 |
| [19] | Miyano N, Fujiwara H, Ameyama K, Weatherly G C.Mater Sci Eng, 2002; A333:85 |
| [20] | Cui Z Q. Metallography and Heat Treatment. Beijing:China Machine Press, 1995:257(崔忠圻.金属学与热处理.北京:机械工业出版社,1995:257) |
| [21] | Xia L F. Metallic Heat Treatment Technology. Herbin:Harbin University of Technology Press, 1998:28(夏立芳.金属热处理工艺学.哈尔滨:哈尔滨工业大学出版社,1998:28) |
| [22] | Xu Z Y. The Theory of Phase Transition. Beijing: Science Press, 2000:22(徐祖耀.相变原理.北京:科学出版社,2000:22) |
| [23] | Huang A J, Li G P, Hao Y L,Yang R. Acta Mater, 2003;51:4939 |
| [24] | Viswanathan G B, Karthikeyan S, Hayes R W, Mills M J.Acta Mater, 2002; 50:4965 |
| [25] | Savage M F, Tatalovich J, Zupan M, Hemker K J, Mills M J. Mater Sci Eng, 2001; A319-321:398 |
| [26] | Seward G G E, Celotto S, Prior D J, Wheeler J, Pond R C. Acta Mater, 2004; 52:821 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%