以 La2O3、CeO2、CaO 和 Fe2O3为起始原料,采用高温固相烧结工艺制备得到(Ca,Fe)共掺铈酸镧(La1.9Ca0.1Ce1.9Fe0.1O7)红外辐射陶瓷材料。采用 X 射线衍射仪、扫描电子显微镜、能谱仪、紫外–可见–近红外(UV-Vis-NIR)分光光度计分别对样品的物相组成、显微结构、化学成份、UV-Vis-NIR 反射率及 UV-Vis 吸收进行了表征,同时采用IR-2双波段红外发射率测量仪测试了样品3~5μm波段的红外发射率。结果表明：掺杂元素(Ca, Fe)均固溶进入铈酸镧晶格,共掺后样品的晶体结构也为萤石结构；(Ca,Fe)共掺样品内部形成杂质能级,强化了自由载流子吸收与杂质能级吸收,使样品红外短波段(0.75~5μm)性能由高反射转变为高吸收(辐射),其中在0.75~2.5μm波段的平均红外吸收率为0.88,3~5μm波段的红外发射率为0.752,与未掺杂样品相比分别提高了1660%与60%。
(Ca,Fe) co-doped lanthanum-cerium oxide (La1.9Ca0.1Ce1.9Fe0.1O7) infrared radiation ceramics were prepared via solid state reaction by using La2O3, CeO2, CaO and Fe2O3 as starting materials. The phase, micro-structure, chemi-cal composition, UV-Vis-NIR reflectivity spectrum, and UV-Vis absorption spectrum of the samples were character-ized by X-ray diffractometer, scanning electron microscopy, energy dispersive X-ray spectroscopy, and UV-Vis-NIR spectrophotometer. The infrared emissivity of the samples in 3-5 μm waveband was also measured by an infrared emissometer. The phase and EDS analysis showed the co-doped sample also had fluorite structure, indicating that Ca and Fe irons entered the crystal lattice of lanthanum-cerium oxide. An impurity energy level was introduced into lan-thanum-cerium oxide by co-doping of Ca and Fe irons, which enhanced the free-carrier absorption and impurity en-ergy level absorption of the sample. This led to a significant increase of absorption and emission in the region of 0.75-5μm, transforming lanthanum-cerium oxide ceramic from high reflection to high absorption (radiation) ceramic after (Ca,Fe) co-doping. The (Ca,Fe) co-doped sample exhibited an absorptivity of 0.88 in 0.75-2.5μm waveband and an infrared emissivity of 0.752 in 3-5μm waveband, increasing by 1660%and 60%, respectively, as compared with that of pure La2Ce2O7 ceramic sample.
参考文献
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%