连接结构是大型复合材料结构的关键环节,对保证复合材料结构的完整性具有重要作用.由于复合材料连接结构存在复杂的非线性耦合因素,使得复合材料连接结构的强度和破坏模式分析十分困难,因此,必须对复合材料连接结构的健康状态进行监测、诊断、评价和预测,通过在线监测获得的信息实时掌握结构的健康状况与对外界载荷的响应,并在此基础上对未来可能发生的缺陷和故障进行预报,以便能在合适时间段内采取措施,以保证复合材料结构的安全服役并取得最大的经济效益.以飞行器复合材料连接结构为背景,首先简要分析了复合材料胶接连接、机械连接和混合连接形式的损伤和失效模式,然后重点介绍了基于波传播法、阻抗法、智能涂层监测法、真空比较监测法、光纤传感监测法和混合集成监测法的复合材料连接结构健康监测(SHM)技术的研究进展,最后讨论了飞行器复合材料连接结构健康监测技术的发展趋势和面临的挑战.
参考文献
| [1] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12. |
| [2] | 范玉青;张丽华.超大型复合材料机体部件应用技术的新进展--飞机制造技术的新跨越[J].航空学报,2009(3):534-543. |
| [3] | REINFORCED PLASTICS GROUP.Airbus A350 XWB update[J].Reinforced Plastics,20106(6):20-24. |
| [4] | 王孝慧;姚卫星.复合材料胶接结构有限元分析方法研究进展[J].力学进展,2012(5):562-571. |
| [5] | Srinivasa D. Thoppul;Joana Finegan;Ronald F. Gibson.Mechanics Of Mechanically Fastened Joints In Polymer-matrix Composite Structures - A Review[J].Composites science and technology,20093/4(3/4):301-329. |
| [6] | Hsien-Tang Sun;Fu-Kuo Chang;Xinlin Qing.The Response of Composite Joints with Bolt-Claming Loads, Part I: Model Development[J].Journal of Composite Materials,20021(1):47-68. |
| [7] | Hsien-Tang Sun;Fu-Kuo Chang;XinLin Qing.The Response of Composite, Joints with Blot-Clamping Loads, Part II: Model Verification[J].Journal of Composite Materials,20021(1):69-92. |
| [8] | Xinlin Qing;Fu-Kuo Chang;James Starnes.Damage tolerance of notched composite laminates with reinforcing strips[J].Journal of Composite Materials,20032(2):111-128. |
| [9] | Jin-Hwe Kweon;Jae-Woo Jung;Tae-Hwan Kim;Jin-Ho Choi;Dong-Hyun Kim.Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding[J].Composite structures,20061/4(1/4):192-198. |
| [10] | 马毓;赵启林.复合材料胶-螺混合连接接头承载力分析[J].复合材料学报,2011(4):225-230. |
| [11] | PHANI MYLAVARAPU;EYASSU WOLDESENBET.Non-destructive characterization of bondlines in composite adhesive joints[J].Journal of Adhesion Science and Technology: The International Journal of Theoredtical and Basic Aspects of Adhesion Science and Its Applications in All Areas of Technology,20067(7):647-660. |
| [12] | 卿新林;王奕首;赵琳.结构健康监测技术及其在航空航天领域中的应用[J].实验力学,2012(5):517-526. |
| [13] | 孙侠生;肖迎春.飞机结构健康监测技术的机遇与挑战[J].航空学报,2014(12):3199-3212. |
| [14] | Bond, Ray;Underwood, Sara;Adams, Douglas E.;Cummins, Joshua J..Structural health monitoring-based methodologies for managing uncertainty in aircraft structural life assessment[J].Structural health monitoring,20146(6):621-628. |
| [15] | Yang JY;Chang FK.Detection of bolt loosening in C-C composite thermal protection panels: I. Diagnostic principle[J].Smart Materials & Structures,20062(2):581-590. |
| [16] | Yang JK;Chang FK.Detection of bolt loosening in C-C composite thermal protection panels: II. Experimental verification[J].Smart Materials & Structures,20062(2):591-599. |
| [17] | 王强;袁慎芳;邱雷.基于时间反转理论的复合材料螺钉连接失效监测研究[J].宇航学报,2007(6):1719-1723. |
| [18] | 袁慎芳;邱雷;王强;苗苗;余振华.压电-光纤综合结构健康监测系统的研究及验证[J].航空学报,2009(2):348-356. |
| [19] | Matt H;Bartoli I;di Scalea FL.Ultrasonic guided wave monitoring of composite wing skin-to-spar bonded joints in aerospace structures[J].The Journal of the Acoustical Society of America,20054(4):2240-2252. |
| [20] | Thomas R. Hay;Lou Wei;Joseph L. Rose.Rapid Inspection of Composite Skin-Honeycomb Core Structures with Ultrasonic Guided Waves[J].Journal of Composite Materials,200310(10):929-939. |
| [21] | Qing XLP;Beard SJ;Kumar A;Hannum R.A real-time active smart patch system for monitoring the integrity of bonded repair on an aircraft structure[J].Smart Materials & Structures,20063(3):N66-N73. |
| [22] | Dong Wang;Lin Ye;Youhong Tang;Ye Lu.Monitoring of delamination onset and growth during Mode I and Mode II interlaminar fracture tests using guided waves[J].Composites science and technology,20122(2):145-151. |
| [23] | 刘国强;肖迎春;李明;贾淑红.复合材料胶接损伤的指数监测方法[J].航空学报,2012(7):1275-1280. |
| [24] | N. Terrien;D. Osmont;D. Royer;F. Lepoutre;A. Deom.A combined finite element and modal decomposition method to study the interaction of Lamb modes with micro-defects[J].Ultrasonics,20071(1):74-88. |
| [25] | Bernard Masserey;Paul Fromme.Fatigue crack growth monitoring using high-frequency guided waves[J].Structural health monitoring,20135/6(5/6):484-493. |
| [26] | Greve DW;Zheng P;Oppenheim IJ.The transition from Lamb waves to longitudinal waves in plates[J].Smart Materials & Structures,20083(3):35029-1-35029-6-0. |
| [27] | Robert Seifried;Laurence J. Jacobs;Jianmin Qu.Propagation of guided waves in adhesive bonded components[J].NDT & E international: Independent nondestructive testing and evaluation,20025(5):317-328. |
| [28] | R. P. Dalton;P. Cawley;M. J. S. Lowe.The Potential of Guided Waves for Monitoring Large Areas of Metallic Aircraft Fuselage Structure[J].Journal of Nondestructive Evaluation,20011(1):29-46. |
| [29] | Aymerich F;Pau M.Assessment of nominal contact area parameters by means of ultrasonic waves[J].Journal of Tribology,20044(4):639-645. |
| [30] | Massimiliano Pau;Antonio Baldi.Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints[J].Journal of pressure vessel technology,20071(1):175-185. |
| [31] | Jalalpour, M.;El-Osery, A.I.;Austin, E.M.;Reda Taha, M.M..Health monitoring of 90° bolted joints using fuzzy pattern recognition of ultrasonic signals[J].Smart Materials & Structures,20141(1):015017-1-015017-8. |
| [32] | 卢萍;王宁;陶俊林;刘信恩.基于声发射技术对螺栓连接结构微动磨损影响因素的研究[J].摩擦学学报,2010(5):443-447. |
| [33] | Zhou, Wei;Liu, Ran;Lv, Zhi-hui;Chen, Wei-ye;Li, Xiao-tong.Acoustic emission behaviors and damage mechanisms of adhesively bonded single-lap composite joints with adhesive defects[J].Journal of Reinforced Plastics and Composites,20151(1):84-92. |
| [34] | Yi Xiao;Takashi Ishikawa.Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation)[J].Composites science and technology,20057/8(7/8):1022-1031. |
| [35] | Yi Xiao;Yoshiaki Kakuta;Takashi Ishikawa.A New Concept for Structural Health Monitoring of Bolted Composite Joints[J].Key engineering materials,20071(1):465-468. |
| [36] | Gyuhae Park;Hoon Sohn;Charles R. Farrar;Daniel J. Inman.Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward[J].The Shock and Vibration Digest,20036(6):451-463. |
| [37] | Victor Giurgiutiu;Andrei N. Zagrai.Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification[J].Journal of vibration and acoustics: Transactions of the ASME,20021(1):116-125. |
| [38] | D. L. Mascarenas;G. Park;K. M. Farinholt;M. D. Todd;C. R. Farrar.A low-power wireless sensing device for remote inspection of bolted joints[J].Proceedings of the Institution of Mechanical Engineers, Part G. Journal of aerospace engineering,20095(5):565-575. |
| [39] | Ritdumrongkul S;Abe M;Fujino Y;Miyashita T.Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor[J].Smart Materials & Structures,20041(1):20-29. |
| [40] | Damage Detection in Bolted Space Structures[J].Journal of Intelligent Material Systems and Structures,20103(3):251. |
| [41] | 吴斌;佟啸腾;刘增华;何存富.基于机电阻抗技术的管道法兰结构健康监测实验研究[J].实验力学,2010(5):516-521. |
| [42] | Hyung Jin Lim;Min Koo Kim;Hoon Sohn.Impedance based damage detection under varying temperature and loading conditions[J].NDT & E International: Independent Nondestructive Testing and Evaluation,20118(8):740-750. |
| [43] | Sam Na;Rudy Tawie;Haeng-Ki Lee.Electromechanical impedance method of fiber-reinforced plastic adhesive joints in corrosive environment usinga reusable piezoelectric device[J].Journal of Intelligent Material Systems and Structures,20127(7):737-747. |
| [44] | Fabricio G. Baptista;Jozue Vieira Filho;Daniel J. Inman.Sizing PZT Transducers in Impedance-Based Structural Health Monitoring[J].IEEE sensors journal,20116(6):1405-1414. |
| [45] | Optimal Frequency Range Selection for PZT Transducers in Impedance-Based SHM Systems[J].IEEE sensors journal,20108(8):1297. |
| [46] | 高峰;王德俊;江钟伟;长南征二.压电阻抗技术用于螺栓松紧健康诊断[J].中国机械工程,2001(9):1048-1049. |
| [47] | Jalalpour, M.;Kim, J.J.;Reda Taha, M.M..Monitoring of L-Shape Bolted Joint Tightness Using Thermal Contact Resistance[J].Experimental Mechanics,20139(9):1531-1543. |
| [48] | Yoshinobu Shimamura;Keiko Oda;Akira Todoroki;Hideo Kobayashi;Takaomi Inada.Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints[J].Key engineering materials,20051(1):653-658. |
| [49] | Yoshinobu Shimamura;Keiko Oda;Akira Todoroki;Masahito Ueda.Detectability of Bearing Failure of Composite Bolted Joints by Electric Resistance Change Method[J].Key engineering materials,20062(2):957-962. |
| [50] | Ivan Argatov;Igor Sevostianov.Health monitoring of bolted joints via electrical conductivity measurements[J].International journal of engineering science,201010(10):874-887. |
| [51] | 吕志刚;戚燕杰;刘马宝;李立人.提高飞机结构安全性与经济性的新对策--ICMS技术对保证飞机结构安全与经济使用的重大作用[J].中国民用航空,2009(7):56-59. |
| [52] | 陈群志;刘健光;余文波;崔常京;刘马宝.ICMS传感器防护技术研究[J].装备环境工程,2010(5):107-110,114. |
| [53] | D. Roach.Real time crack detection using mountable comparative vacuum monitoring sensors[J].Smart structures and systems,20094(4):317-328. |
| [54] | Hideaki Murayama;Kazuro Kageyama;Hiroshi Naruse.Application of Fiber-Optic Distributed Sensors to Health Monitoring for Full-Scale Composite Structures[J].Journal of Intelligent Material Systems and Structures,20031(1):3-13. |
| [55] | Grave, Jon Harald L.;Haheim, Magnus L.;Echtermeyer, Andreas T..Measuring changing strain fields in composites with Distributed Fiber-Optic Sensing using the optical backscatter reflectometer[J].Composites, Part B. Engineering,2015Jun.(Jun.):138-146. |
| [56] | K.I. Tserpes;V. Karachalios;I. Giannopoulos;V. Prentzias;R. Ruzek.Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part Ⅰ: Design, manufacturing and impact testing[J].Composite structures,2014Jan.(Jan.):726-736. |
| [57] | Luis P. Canal;Roohollah Sarfaraz;Georgios Violakis;John Botsis;Veronique Michaud;Hans G. Limberger.Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors[J].Composite structures,2014Jun.(Jun.):241-247. |
| [58] | Sarfaraz, Roohollah;Canal, Luis P.;Violakis, Georgios;Botsis, John;Michaud, Veronique;Limberger, Hans G..An experimental-numerical investigation of hydrothermal response in adhesively bonded composite structures[J].Composites, Part A. Applied science and manufacturing,2015:176-185. |
| [59] | Demetgul, M.;Senyurek, V. Y.;Uyandik, R.;Tansel, I. N.;Yazicioglu, O..Evaluation of the health of riveted joints with active and passive structural health monitoring techniques[J].Measurement,2015:42-51. |
| [60] | 徐超;周帮友;刘信恩;张铎.机械螺栓连接状态监测和辨识方法研究进展[J].强度与环境,2009(2):28-36. |
| [61] | Vincent Caccese;Richard Mewer;Senthil S. Vel.Detection of bolt load loss in hybrid composite/metal bolted connections[J].Engineering structures,20047(7):895-906. |
| [62] | 卿新林;王奕首;高丽敏;武湛君.多功能复合材料结构状态感知系统[J].实验力学,2011(5):611-616. |
| [63] | Alexi Rakow;Fu-Kuo Chang.A structural health monitoring fastener for tracking fatigue crack growth in bolted metallic joints[J].Structural health monitoring,20123(3):253-267. |
| [64] | McEvoy, M. A.;Correll, N..Materials that couple sensing, actuation, computation, and communication[J].Science,2015Mar.20 TN.6228(Mar.20 TN.6228):1328-1328. |
| [65] | Carbon nanotube-based health monitoring of mechanically fastened composite joints[J].Composites science and technology,200812(12):p.2557. |
| [66] | Roham Mactabi;Iosif D. Rosca;Suong V. Hoa.Monitoring the integrity of adhesive joints during fatigue loading using carbon nanotubes[J].Composites science and technology,2013Apr.(Apr.):1-9. |
| [67] | Min-Hyo Kang;Jin-Ho Choi;Jin-Hwe Kweon.Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes[J].Composite structures,2014Feb.(Feb.):417-422. |
| [68] | Piezoelectric Wafer Active Sensor Structural Health Monitoring of Space Structures[J].Journal of Intelligent Material Systems and Structures,20109(9):P.921. |
| [69] | Zhou, Chao;Hong, Ming;Su, Zhongqing;Wang, Qiang;Cheng, Li.Evaluation of fatigue cracks using nonlinearities of acousto-ultrasonic waves acquired by an active sensor network[J].Smart Materials & Structures,20131(1) |
| [70] | Ni, X.;Rizzo, P..Highly Nonlinear Solitary Waves for the Inspection of Adhesive Joints[J].Experimental Mechanics,20129(9):1493-1501. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%