针对傅里叶变换、小波算法等传统信号处理方法在非线性信号的提取与重构中存在的缺陷，提出了基于聚合经验模态分解的轧辊偏心信号提取新方法。另外，针对传统自动厚度控制系统(AGC)在偏心补偿控制中的不足，设计了有偏心补偿环节的 AGC系统。新方法将轧制力信号分解为多个不同特征模态函数，从中提取表征偏心信号的特征模态函数，并用此重构偏心信号，最后将新方法重构的偏心信号投入到此系统中控制轧件厚度。仿真及实验结果表明，利用聚合经验模态分解方法重构得到的轧辊偏心模型可以很大程度减小厚度波动，补偿效果优于小波算法。
Traditional signal processing methods such as Fourier transform and wavelet algorithm showed some limits at extracting and reconstructing the nonlinear signal.A new roll eccentricity signal extraction method,which was based on the ensemble empirical mode decomposition,was presented.Furthermore,in view of the limits of the traditional automatic gauge control (AGC)system in the control of the eccentricity compensation,an AGC system with the unit of eccentricity compensation was designed.This new method divided the rolling force signal into a plurality of different intrinsic mode functions,and extracted part of intrinsic mode functions that characterized ec-centricity signal to reconstruct eccentricity signal.Finally the remodelling eccentricity signal reconstructed by the new method was input into this system to control the thickness of the rolled piece.The simulation and experiment results showed that the reconstructed eccentricity model with the ensemble empirical mode decomposition method can greatly reduce the thickness fluctuation,and the compensation effect was better than wavelet algorithm.
参考文献
| [1] | 李勇;胡贤磊;王君;刘相华;李海涛.轧辊偏心分析和补偿汉宁窗采样的FFT比值算法[J].钢铁研究学报,2007(2):20-24. |
| [2] | 应海松;陈贺海;李斐真.小波变换在铁矿石中非铁矿类物质分析的应用[J].钢铁研究学报,2011(8):59-62. |
| [3] | ZHAOHUA WU;NORDEN E. HUANG.ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD[J].Advances in Adaptive Data Analysis,20091(1):1-41. |
| [4] | Abdel-Ouahab Boudraa;Jean-Christophe Cexus.EMD-Based Signal Filtering[J].IEEE Transactions on Instrumentation and Measurement,20076(6):2196-2202. |
| [5] | Junsheng Cheng;Dejie Yu;Jiashi Tang;Yu Yang.Application of frequency family separation method based upon EMD and local Hilbert energy spectrum method to gear fault diagnosis[J].Mechanism and Machine Theory: Dynamics of Machine Systems Gears and Power Trandmissions Robots and Manipulator Systems Computer-Aided Design Methods,20086(6):712-723. |
| [6] | Huang NE.;Long SR.;Wu MLC.;Shih HH.;Zheng QN.;Yen NC.;Tung CC.;Liu HH.;Shen Z..The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis[J].Proceedings of the Royal Society. Mathematical, physical and engineering sciences,19981971(1971):903-995. |
| [7] | 胡爱军;孙敬敬;向玲.经验模态分解中的模态混叠问题[J].振动、测试与诊断,2011(4):429-434. |
| [8] | 齐天;裘焱;吴亚锋.利用聚合经验模态分解抑制振动信号中的模态混叠[J].噪声与振动控制,2010(2):103-106. |
| [9] | 杨贤昭 .基于经验模态分解的故障诊断方法研究[D].武汉科技大学,2012. |
| [10] | 朱正;王逸林;蔡平.EMD中的求取均值曲线方法[J].哈尔滨工程大学学报,2011(7):873-876. |
| [11] | 张进林 .抑制经验模态分解端点效应的常用方法性能比较研究[D].云南大学,2010. |
| [12] | 康春玉;章新华.一种基于EMD和ANC技术的自适应降噪方法[J].系统工程与电子技术,2008(5):810-812. |
| [13] | 杨旭;童朝南.板带轧机振动问题研究[J].钢铁研究学报,2009(11):1-4,11. |
| [14] | 陈冬娣 .基于小波变换与经验模态分解的电机转子振动信号处理方法的研究[D].南京师范大学,2013. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%