用热冲压模具研究了超高强度钢30CrMnSi2Nb热冲压配分工艺,测试了两步法淬火和配分处理工艺对超高强度钢的组织演变和强塑性能的影响规律.利用光学电镜(OM)、扫描电镜(SEM)进行了微观组织观察,用X射线衍射仪(XRD)研究了残余奥氏体含量的变化规律.结果表明:热成形配分工艺可明显提高钢的塑性和强塑积;配分过程中,碳配分和均匀化在几十秒内可完成;残余奥氏体含量是决定淬火马氏体钢塑性的主要控制因素.证实了热冲压淬火和配分工艺是一种可获得超高强度兼具高塑性汽车钢板的新型热成形处理工艺.
参考文献
| [1] | (A)kerstr(o)m P .Modelling and simulation of hot stamping[D].Sweden,Lule(a):Lule(a) University of Technology,2006. |
| [2] | 江海涛,唐荻,米振莉.汽车用先进高强度钢的开发及应用进展[J].钢铁研究学报,2007(08):1-6. |
| [3] | Turetta A;Bruschi S;Ghiotti A .Investigation of 22MnB5 formability in hot stamping operations[J].Journal of Materials Processing Technology,2006,177(1/3):396. |
| [4] | H. Karbasian;A. E. Tekkaya .A review on hot stamping[J].Journal of Materials Processing Technology,2010(15):2103-2118. |
| [5] | J. Speer;D. K. Matlock;B. C. De Cooman;J. G. Schroth .Carbon partitioning into austenite after martensite transformation[J].Acta materialia,2003(9):2611-2622. |
| [6] | Hsu T Y;Xu Z Y.Design of structure,composition and heat treatment process for high strength steel[J].Materials Science Forum,2007(561/565):2283. |
| [7] | Heping Liu;Xianwen Lu;Xuejun Jin .Enhanced mechanical properties of a hot stamped advanced high-strength steel treated by quenching and partitioning process[J].Scripta materialia,2011(8):749-752. |
| [8] | Speer JG;Edmonds DV;Rizzo FC;Matlock DK .Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation[J].Current opinion in solid state & materials science,2004(3/4):219-237. |
| [9] | Zhong, N;Wang, XD;Wang, L;Rong, YH .Enhancement of the mechanical properties of a Nb-microalloyed advanced high-strength steel treated by quenching-partitioning-tempering process[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):111-116. |
| [10] | Ning ZHONG,Xiaodong WANG,Yonghua RONG,Li WANG.Interface Migration between Martensite and Austenite during Quenching and Partitioning (Q&P) Process[J].材料科学技术学报（英文版）,2006(06):751-754. |
| [11] | Matlock D K;Br(a)utigam V E;Speer J G.Application of the quenching and partitioning (Q&P) process to a medium-carbon,high-Si mieroalloyed bar steel[J].Materials Science Forum,2003(426/432):1089. |
| [12] | Sugimoto K.;Iida T. .Retained Austenite Characteristics and Tensile Properties in a TRIP Type Bainitic Sheet Steel[J].ISIJ International,2000(9):902-908. |
| [13] | Chiro A D;Root J;Yue S.The effect of microstrueture on the strain induced transformation of a Si-Mn bainite steel[A].USA:ISS-AIME,1996:373. |
| [14] | Krauss G.Steels.Heat treatment and processing principles[M].OH:ASM International,Materials Park,1990 |
| [15] | Wang C F;Wang M Q;Shi J et al.Effect of microstructure refinement on the toughness of low carbon martensitic steel[J].Scripta Materialia,2008,58(6):492. |
| [16] | Zengmin Shi;Kai liu;Maoqiu Wang .Effect of Tensile Deformation of Austenite on the Morphology and Strength of Lath Martensite[J].Metals and Materials International,2012(2):317-320. |
| [17] | DeCooman B C.Effect of retained austenite stability of Si-Mn TRIP steel on the product of strength and ductility[A].Aachen:WMG,2001:13. |
| [18] | Speer J G;Matlock D K;DeCooman B C et al.Comments on " on the definitions of paraequilibrium and orthoequilibrium "[J].Scripta Materialia,2005,52(1):83. |
| [19] | Rizzo F C;Edmonds D V;He K.Carbon enrichment of austenite and carbide precipitation during the quenching and partitioning (Q&p) process[A].Warrendale,PA,USA:Minerals,Metals and Materials Society,2005:535. |
| [20] | Magee C L.Nucleation of martensite[A].OH:ASM,Materials Park,1970:115. |
| [21] | Andrews K W .Empirical formulae for the calculation of some transformation temperatures[J].Journal of the Iron and Steel Institute,1965,203(6):721. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%