在已验证的电磁-热-溶质传输耦合模型的基础上,以某钢厂同时装配有M-EMS和F-EMS的方、圆坯先进铸机为研究对象,对二维切片凝固传热模型中液相有效导热系数的放大倍数m值进行了定量化研究.结果表明,溶质再分配作用下,方、圆坯凝固终点处的钢液液相线温度较浸入式水口入口处的分别约下降了23.27和5.54℃;与二维切片模型相比,采用耦合模型计算时,铸坯凝固终点位置分别后移了1.8和0.9m;为保证同时准确获取铸坯表面温度分布状态及其内部凝固终点位置,在本方、圆坯工况下,二维切片模型中纯液相和糊状区内液相有效导热系数放大倍数的推荐值范围分别为2.2～2.4和1.1～1.2.
参考文献
| [1] | Louhenkilpi S;Laitinen E;Nieminen R .Real-time simulation of heat transfer in continuous casting[J].Metallurgical Transactions,1993,24B(4):685. |
| [2] | 吴炼,张炯明,刘志明,魏小东,罗衍昭,肖超.小方坯连铸末端电磁搅拌综合控制模型[J].钢铁研究学报,2013(02):14-19. |
| [3] | Petrus B;Zheng K;Zhou X et al.Real-time,model-based spray-cooling control system for steel continuous casting[J].Metallurgical and Materials Transactions,2011,42B(1):87. |
| [4] | Mizikar E A .Mathematical heat transfer model for solidification of continuously cast steel[J].Transactions of the Metallurgical Society of AIME,1967,239(11):1747. |
| [5] | Lally B;Biegler L;Henein H .Finite difference heat-transfer modeling for continuous casting[J].Metallurgical Transactions,1990,21B(4):761. |
| [6] | 刘坤,冯亮花,赵连刚,仇圣桃.板坯连铸机二冷段的动态控制模型[J].钢铁研究学报,2005(02):75-78. |
| [7] | Kenneth C. MILLS;Yuchu SU;Zushu LI .Equations for the calculation of the thermo-physical properties of stainless steel[J].ISIJ International,2004(10):1661-1668. |
| [8] | Crank J.Free and moving boundary problems[M].Oxford:Clarendon Press,1984 |
| [9] | A. Marcandalli;C. Mapelli;W. Nicodemi .A thermomechanical model for simulation of carbon steel solidification in mould in continuous casting[J].Ironmaking & Steelmaking: Products and applications,2003(4):265-272. |
| [10] | Choudhary S K;Mazumdar D .Mathematical modelling of her transfer phenomena in continuous casting of steel[J].ISIJ International,1994,34(7):584. |
| [11] | 刘旭东,朱苗勇,邹俊苏,宋景欣,程乃良.连铸板坯凝固传热过程的计算机模拟[J].材料与冶金学报,2002(03):195-199. |
| [12] | Dimtry Sediako;Olga Sediako .Some Aspects of Thermal Analysis and Technology Upgrading in Steel Continuous Casting[J].Canadian Metallurgical Quarterly,1999(5):377-385. |
| [13] | 刘文红,谢植,纪振平,王彪,赖兆奕.连铸二冷配水先进控制策略的研究及应用[J].钢铁研究学报,2007(09):59-62. |
| [14] | Li J;Wang B;Ma Y et al.Effect of complex electromagnetic stirring on inner quality of high carbon steel bloom[J].Material Science and Engineering,2006,425A(1):201. |
| [15] | 陈素琼,张家泉,崔立新,干勇,倪满森.板坯凝固末端轻压下实时控制的热-力学分析[J].钢铁研究学报,2003(02):9-13,18. |
| [16] | 孙海波 .连铸过程中心偏析数值模拟与控制技术研究[D].北京:北京科技大学,2014. |
| [17] | HAIBO SUN;JIAQUAN ZHANG .Study on the Macrosegregation Behavior for the Bloom Continuous Casting: Model Development and Validation[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2014(3):1133-1149. |
| [18] | 钱宏智 .钢热膨胀及其连铸辊缝控制工艺热力耦合研究[D].北京:北京科技大学,2010. |
| [19] | HAIBO SUN;JIAQUAN ZHANG .Macrosegregation Improvement by Swirling Flow Nozzle for Bloom Continuous Castings[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2014(3):936-946. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%