欢迎登录材料期刊网

材料期刊网

高级检索

采用常温甘油溶液体系模拟高钛型高炉渣,通过系统的实验研究了黏度、表面张力和固体颗粒掺杂对泡沫化行为的影响.实验结果表明:随黏度的增加,溶液泡沫化指数先增加后减小,也即涨泡性能先增强后减弱,黏度为93.6 mPa·s时达到最大.相同的气体表观速率下,泡沫高度随表面张力的减小而增加;表面张力相同时,泡沫高度随表观速率的增加而增加.表观速率一定时,泡沫高度随固体颗粒PPS含量的增加而增增加,随固体颗粒PPS粒径的减小而增大.同一表观速率下,随着滤板孔径的增大,泡沫高度显著降低.

参考文献

[1] S. Barella;A. Gruttadauria;C. Mapelli .Critical evaluation of role of viscosity and gas flowrate on slag foaming[J].Ironmaking & Steelmaking: Products and applications,2012(6):463-469.
[2] 吴铿,冯宝泽,王涛,李安军,熊国兰,许江明.冶金过程中熔渣发泡现象的定量描述[J].中国稀土学报,2004(z1):461-464.
[3] TAI XI ZHU;K.S. COLEY;G.A. IRONS .Progress in Slag Foaming in Metallurgical Processes[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2012(4):751-757.
[4] Zhu M;Jones T;Sichen D .Modelling study of slag foaming by chemical reaction[J].Scandinavian Journal of Metallurgy,2001,30(1):51.
[5] 文玲,张金柱.含钛高炉渣性能的研究进展[J].钢铁研究学报,2011(05):1-3,19.
[6] 张东力;王晓鸣;匡世波 等.IF精炼渣发泡性能的实验研究[J].钢铁研究学报,2004,15(6):12.
[7] Ito K;Fruehan R J .Study on the foaming of CaO-SiO2-FeO slags:part I.foaming parameters and experimental results[J].Metallurgical Transactions,1989,20B(4):509.
[8] Y. ZHANG;R.J. FRUEHAN .Effect of Carbonaceous Particles on Slag Foaming[J].Metallurgical Transactions.B.Process Metallurgy,1995(4):813-819.
[9] Kitamura S;Okohira K .Influence of slag composition and temperature on slag foaming[J].ISIJ International,1992,32(6):741.
[10] Ghag Surinder S;Hayes Peter C;Lee Hae-Geon .Physical model of studies on slag foaming[J].ISIJ International,1998,38(11):1201.
[11] L. S. Wu;G. J. Albertsson;Du Sichen .Modelling of slag foaming[J].Ironmaking & Steelmaking: Products and applications,2010(8):612-619.
[12] Martin M;Montes FJ;Galan MA .On the influence of the liquid physical properties on bubble volumes and generation times[J].Chemical Engineering Science,2006(16):5196-5203.
[13] 曲彦平,杜鹤桂,葛利俊.表面粘度对泡沫稳定性的影响[J].沈阳工业大学学报,2002(04):283-286.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%