针对带钢连退过程中的热瓢曲问题，充分考虑到连退机组的设备与工艺特点，从内力、外力两方面因素分析了热瓢曲以及横向压应力的产生机理，阐述了热瓢曲的发生规律，首次提出了瓢曲指数的新概念，给出了相应的瓢曲临界条件，建立了一套适合于连退过程的带钢热瓢曲指数的计算模型，定量分析了不同工艺段内带钢瓢曲指数分布规律以及相同工艺段内来料板形、横向温差、炉辊辊型、摩擦因数、设定张力、通板速度等因素对带钢热瓢曲指数的影响，并将相关理论应用到生产实践，开发出了“连退机组通板过程带钢瓢曲预报软件”，实现了对连退过程带钢瓢曲的在线预报，为瓢曲缺陷的预防和控制奠定了坚实的理论基础。
In allusion to the problem of strip hot buckling in continuous annealing process(CAP),taking the equip-ment and technological characteristics of CAP into account,the mechanism of hot buckling and transverse compressive stress from the factors of internal force and external force were analyzed. Basically,the study described the occurrence law of strip hot buckling and firstly put forward the concept of buckling index. Based on above results,the critical buck-ling condition was presented,and the calculation model of strip buckling index in continuous annealing process was es-tablished. The strip buckling index distribution in different processes and the influences of incoming strip shape,trans-verse temperature difference,roll profile,friction coefficient,tension setting,strip traveling speed on the strip hot buckling index in continuous annealing process were analyzed quantitatively. The related theory was applied to the pro-duction and practice. The predictive software of strip buckling in continuous annealing process was developed and the strip buckling was on-line predicted timely,which can lay a solid foundation for the prevention and control of strip buck-ling defects.
参考文献
| [1] | 陈金山;王君;岑一鸣;付博.1750mm 冷连轧精冲钢的连续退火工艺[J].中国冶金,2016(3):7-12. |
| [2] | 赵岩;蔡晓辉;刘振宇.连续退火参数对980MPa级冷轧双相钢组织和性能的影响[J].钢铁研究学报,2015(2):55-59. |
| [3] | 万飞;王勇勤;金敏.立式连续退火炉预热段带钢加热温度分析计算[J].中国冶金,2011(5):40-43,56. |
| [4] | 张宝平;周莲莲.连续退火生产线带材翘曲治理方案的研究[J].中国冶金,2007(7):55-57. |
| [5] | 令狐克志;闻达;蔡阿云.带钢拉伸横向屈曲及拉伸极限载荷的研究[J].钢铁研究学报,2010(7):6-9. |
| [6] | N. Jacques;A. Elias;M. Potier-Ferry.Buckling and wrinkling during strip conveying in processing lines[J].Journal of Materials Processing Technology,20071/3(1/3):33-40. |
| [7] | 张清东;常铁柱;戴江波.带钢高温态横向瓢曲的理论与试验[J].机械工程学报,2008(8):219-226. |
| [8] | 张清东;白剑;常铁柱;邹玉贤;黄夏兰.连续退火炉内带钢张力设定模型研究[J].钢铁,2006(2):42-45. |
| [9] | 张利祥;李俊;张理扬.连续退火机组带钢瓢曲临界张力的研究[J].钢铁,2012(6):42-45. |
| [10] | 令狐克志;乔建军;王洋;朱国森;刘光明.带钢连退热瓢曲与初始板形关系仿真与实践[J].钢铁,2012(2):58-61. |
| [11] | 白振华;石晓东;张岩岩;马续创;胡宝福;傅耀湘;周利.连续退火过程中带钢热瓢曲产生的机理[J].塑性工程学报,2012(1):97-102. |
| [12] | 白振华;王瑞;崔亚亚;常金梁;兴百宪;段建高.连退过程带钢张力横向分布模型及其影响因素[J].钢铁,2015(4):40-47. |
| [13] | 李会免;刘建雄;李俊洪.连续退火炉内带钢横向张力分布研究[J].热加工工艺,2010(4):148-150,158. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%