弧形板是定宽压力机进行运动转化和轧制力传递的关键部件,扇形齿用于防止弧形板之间的打滑.对定宽压力机的基本结构进行分析后,发现当弧形板磨损后,扇形齿会在一定范围内自动偏转,保证运动转化和轧制力传递的正常进行,当扇形齿偏转到极限位置时,如果弧形板继续磨损,就会造成扇形齿的破坏.为防止这种破坏的发生,根据设备几何参数定量计算弧形板的磨损极限,为定宽压力机的检修与备件更换提供理论依据.对影响弧形板极限磨损量的关键结构参数进行分析,为设备改造及国产化提供指导.
The curved plates are key components of the slab sizing press machine to transform movement and rolling force,and the sector gears are used to prevent the slippage among curved plates. After analyzing the basic structure of slab sizing press machine,it is found that after the curved plates worn away,the sector gears could deflect automatically within a certain range to ensure the smoothing transformation of movement and rolling force. When the sector gears de-flect to the limiting position and the curved plates are wearing continually,the sector gears will break easily. In order to prevent the happening of the break above,the wear limit of curved plate is calculated on the basis of geometrical parame-ters of device,which provides a theoretical basis for the maintenance and spare part replacement of slab sizing press ma-chine. The key structural parameters which influence the wear limit of curved plates are analyzed,which can provide a guidance for the modification and localization of equipment .
参考文献
| [1] | 董占斌;王雪松;才春辉;刘永利.基于 ANSYS 的立-平轧制过程的有限元模拟[J].中国冶金,2015(4):18-23. |
| [2] | 刘海平 .SP定宽机轧制过程的有限元模拟[D].燕山大学,2003. |
| [3] | 焦四海;周旭;刘相华.调宽压力机调宽时板坯变形特点[J].钢铁,2000(12):34. |
| [4] | 杨雄;李长生;刘相华;付华高.用有限元法分析板坯调宽过程中切头量的变化[J].钢铁研究学报,2002(6):29-32. |
| [5] | 杨雄;李长生;刘相华;王国栋.连铸板坯大侧压不对称变形有限元分析[J].钢铁研究,2002(1):15-17,21. |
| [6] | Mohammad Reza Forouzan;Iman Salehi;Amir Hossein Adibi-sedeh.A comparative study of slab deformation under heavy width reduction by sizing press and vertical rolling using FE analysis[J].Journal of Materials Processing Technology,20092(2):728-736. |
| [7] | 胡健.2250 mm热连轧板带宽度控制优化[J].中国冶金,2014(03):1-3,13. |
| [8] | 冯宪章;刘才;江光彪;王英杰;唐越.1580大侧压定宽机运动学仿真及优化分析[J].机械工程学报,2004(8):178-182. |
| [9] | 冯宪章;刘才;江光彪;王英杰.宝钢SP定宽机侧压框架动力学分析[J].重型机械,2004(2):34-37. |
| [10] | 王英杰;江光彪;刘才;刘海平;冯宪章;史荣.SP轧制过程及侧压模块受力的测试研究及有限元分析[J].钢铁,2004(7):42-46. |
| [11] | 史荣;江光彪;刘才;李旭明;唐越.SP轧机运动状态分析[J].钢铁,2005(8):48-52. |
| [12] | D. C. Ko;S. H. Lee;D. H. Kim;S. M. Byon;H. D. Park;B. M. Kim.Design of sizing press anvil for decrease of defect in hot strip[J].Journal of Materials Processing Technology,20070(0):738-742. |
| [13] | 王光寰 .定宽侧压机复合型模块的研制与应用[D].上海交通大学,2009. |
| [14] | 刘松;廖永锋.1880热轧SSP定宽机结构特点分析[J].重型机械,2011(5):47-49. |
| [15] | 梁振久;张晓辉.宝钢1880超大定宽机机架堆焊工艺[J].一重技术,2006(5):40-41. |
| [16] | 李家一;张保华.定宽压力机导向辊装配[J].一重技术,2008(5):51-52. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%