Super304H(18Cr-9Ni-3Cu-Nb-N)奥氏体不锈钢常作为超超临界锅炉过热器和再热器管道的首选材料。从化学成分对显微组织和性能的影响、析出相析出机理、组织对高温性能的影响三方面综述了目前Super304H 钢高温下组织和性能演变的研究进展，提出了今后 Super304H 钢高温组织和性能演变的主要研究方向。
Super304H(18Cr-9Ni-3Cu-Nb-N)austenitic stainless steel is generally used as a preferred material for superheater and reheater tubes in ultra-supercritical boiler.The research progress on the high-temperature microstructure and property evolution of Super304H steel is summarized in terms of the influence of chemical composition on microstructure and properties,the mechanism of precipitates and the influence of the microstructure on high-temperature properties.The further research direction of the high-temperature microstructure and property evolution of Super304H steel is also proposed.
参考文献
| [1] | 黄雅罗.超超临界火力发电技术及其应用前景[J].热力发电,2002(02):2-7,38. |
| [2] | 迟成宇;于鸿垚;谢锡善.600℃超超临界电站锅炉过热器及再热器管道用先进奥氏体耐热钢的研究与发展[J].世界钢铁,2012(4):50-65. |
| [3] | 迟成宇;董建新;刘文庆;谢锡善.3DAP研究Super304H耐热不锈钢中富Cu相的析出行为[J].金属学报,2010(9):1141-1146. |
| [4] | 李新梅;邹勇;张忠文;邹增大.Super304H奥氏体耐热钢微观组织研究[J].材料科学与工艺,2010(2):256-261. |
| [5] | 杨岩;程世长;杨钢.铜含量对Super304H钢持久性能的影响[J].机械工程材料,2002(10):23-25. |
| [6] | Sen, I.;Amankwah, E.;Kumar, N.S.;Fleury, E.;Oh-ishi, K.;Hono, K.;Ramamurty, U..Microstructure and mechanical properties of annealed SUS 304H austenitic stainless steel with copper[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201113/14(13/14):4491-4499. |
| [7] | Sourmail T..Precipitation in creep resistant austenitic stainless steels [Review][J].Materials Science and Technology: MST: A publication of the Institute of Metals,20011(1):1-14. |
| [8] | B. Prabha;P. Sundaramoorthy;S. Surest;S. Manimozhi;B. Ravishankar.Studies on Stress Corrosion Cracking of Super 304H Austenitic Stainless Steel[J].Journal of Materials Engineering and Performance,20099(9):1294-1299. |
| [9] | Yan Gao;Chunlei Zhang;Xiahua Xiong.Intergranular corrosion susceptibility of a novel Super304H stainless steel[J].Engineering failure analysis,2012:26-32. |
| [10] | 于鸿垚;迟成宇;董建新;谢锡善;崔正强;陈孝方.650℃长期时效过程中Super 304H耐热不锈钢组织的演变[J].北京科技大学学报,2010(7):877-882. |
| [11] | Dieter Isheim;Semyon Vaynman;Morris E. Fine.Copper-precipitation hardening in a non-ferromagnetic face-centered cubic austenitic steel[J].Scripta materialia,200812(12):1235-1238. |
| [12] | 欧平;孙坚;崔正强;杨昌顺.Super304H奥氏体耐热钢时效后的组织结构[J].材料热处理学报,2014(5):85-91. |
| [13] | 王苗苗;朱毕焱.不同状态下S30432钢析出相的分析[J].动力工程学报,2010(4):281-283. |
| [14] | X.M. Li;Y.Zou;Z.W.Zhang.Intergranular Corrosion of Weld Metal of Super Type 304H Steel During 650°C Aging[J].Corrosion: The Journal of Science and Engineering,20125(5):379-387. |
| [15] | E.J. Giordani;A.M. Jorge;Jr..Proportion of recovery and recrystallization during interpass times at high temperatures on a Nb- and N-bearing austenitic stainless steel biomaterial[J].Scripta materialia,20068(8):743-746. |
| [16] | 杨亚红;朱丽慧;姜筠;王起江;朱长春.650℃持久对HR3C耐热钢析出相的影响[J].材料热处理学报,2013(z2):106-110. |
| [17] | 唐波;朱丽慧.高温和应力作用下国产S30432钢中Z相的析出行为[J].机械工程材料,2015(5):19-22. |
| [18] | 倪进飞;王志武;李茂东;黎华;卢忠铭;尤晋.电站锅炉用TP304H不锈钢管显微组织的老化特征[J].理化检验-物理分册,2013(12):790-794. |
| [19] | 唐波;朱丽慧;王起江.S30432钢700℃持久σ相的析出及其对性能的影响[J].动力工程学报,2014(10):827-832. |
| [20] | Xin-mei Li;Yong Zou;Zhong-wen Zhang.Microstructure Evolution of a Novel Super304H Steel Aged at High Temperatures[J].Materials transactions,20102(2):305-309. |
| [21] | 李新梅;邹勇;张忠文;邹增大.时效温度对Super304H钢析出相的影响[J].材料热处理学报,2009(6):51-56. |
| [22] | 张忠文;李新梅;杜宝帅;邹勇;魏玉忠.Super304H钢700℃时效后组织和韧性的变化[J].机械工程材料,2012(10):12-14,46. |
| [23] | 李新梅;邹勇;张忠文;邹增大.新型耐热钢Super304H高温时效后的组织与性能[J].材料工程,2009(5):38-42. |
| [24] | YujieZHANG;Lihui ZHU;Anfang QI;Zhengran LU.Microstructural Evolution and the Effect on Mechanical Properties of 530432 Heat-resistant Steel during Aging at 650°C[J].ISIJ International,20104(4):596-600. |
| [25] | 王俪篥;朱丽慧;王起江.Super304H耐热钢的强化机理[J].材料热处理学报,2011(6):127-131. |
| [26] | 马云海;郑开云;林富生;吾之英.表面加工状态对Super 304H钢抗蒸汽氧化性能的影响[J].动力工程学报,2013(7):572-580. |
| [27] | 郭岩;唐丽英;周荣灿;侯淑芳;林琳.晶粒尺寸和表面状态对S30432钢蒸汽氧化行为的影响[J].动力工程学报,2011(8):644-648. |
| [28] | 赵林;董显平;孙锋;张澜庭;单爱党;刘鸿国.Super304H超超临界锅炉过热器管长期服役后的显微组织及力学性能[J].机械工程材料,2013(7):28-32,42. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%